Products from Revolution Design
Verantwortlicher nach GPSR – person responsible GPSR:
RUDDOG Distribution GmbH
Sägewerkstr. 16
83416 Saaldorf-Surheim
Deutschland
support@ruddog.eu
www.ruddog.eu
Hersteller – manufacturer:
RUDDOG Distribution GmbH
Sägewerkstr. 16
83416 Saaldorf-Surheim
Deutschland
support@ruddog.eu
www.ruddog.eu
No results were found for the filter!
NEW
Revolution Design 0702 - Asso B7 - Aluminum Caster Block Pivot Balls (4 pcs)
These precision-machined pivot balls replace the standard steel versions and help reduce front-end weight significantly – each ball weighs just 0.21 g . In addition to saving weight, the tighter manufacturing tolerances of the aluminium...
€9.99
*
currently 1x in stock
NEW
Revolution Design 0717 - XRAY XB4 2025 - Aluminium Caster Block Set
Based on the proven RDRP design philosophy, these caster blocks are machined from aircraft-grade 7075-T6 aluminium to provide the perfect balance of reduced unsprung weight and maximum strength. The 7° caster angle, used by most XRAY...
€39.99
*
currently 1x in stock
NEW
Revolution Design 0718 - XRAY XB4 XB2 - Aluminium Rear Hub Set - Lower Position
Made from high-quality 7075-T6 aluminium, these rear hubs replace the standard composite parts to provide greatly improved durability and a more precise handling experience — especially under high-stress racing conditions. The increased...
€39.99
*
currently 1x in stock
NEW
Revolution Design 0725 - Ultra TC Offset Servo Horn - 25T - adjustable 15-19mm
CNC-machined from strong 7075-T6 aluminium, it delivers superior rigidity and accurate steering response. The black anodized finish, silver chamfered edges, and laser-etched branding give it a premium factory appearance. Its standout...
€14.99
*
currently 1x in stock
NEW
Revolution Design 0726 - Ultra Low Friction Belt - 351mm - 3mm
Manufactured from high-quality, low-friction material, this white belt ensures smooth and efficient power delivery while offering excellent durability and low wear over time. Measuring 351 mm in length and 3 mm in width, it is designed...
€11.99
*
currently 1x in stock
NEW
Revolution Design 0727 - Asso B7 - Carbon Front Wing Plate
The 2mm carbon fiber plate is both lightweight and extremely durable. Its rigid design ensures precise front wing support and improved durability during hard landings or impacts. In addition to the performance benefits, the carbon fiber...
€5.99
*
currently 1x in stock
NEW
Revolution Design 0728 - Asso B4.1 - Carbon Wing Plate
Made from 2mm high-quality carbon fiber, this wing plate combines lightweight construction with excellent rigidity. Its durable design offers increased crash resistance and helps maintain consistent wing alignment during high-speed runs...
€9.99
*
currently 1x in stock
NEW
Revolution Design 0714 - XRAY XB2 2025 - Ultra Battery Mount Set
Designed as a direct replacement for the standard plastic battery holder, this set combines improved durability, smart functionality, and a clean, high-end look using premium materials and precision machining. Machined from high-quality...
€34.99
*
currently 2x in stock
NEW
Revolution Design 0715 - XRAY XB2 2025 - Aluminium Bulkhead 0 deg - 12g
Precision-machined from high-strength 7075-T6 aluminium, it replaces the stock plastic bulkhead to enhance durability and handling performance. The black anodized finish with silver machined edges adds a refined racing look. Features:...
€25.99
*
currently 2x in stock
NEW
Revolution Design 0716 - XRAY XB2 2025 - Steel Bulkhead 0 deg - 45g
Made from high-quality steel, this bulkhead offers extreme durability and a significantly increased weight of 45g—perfect for improving balance and front traction on low-grip surfaces. The black coating provides corrosion resistance and...
€29.99
*
currently 2x in stock
NEW
Revolution Design 0713 - XRAY XB4 2025 - Carbon Fiber Battery Mount Set
Designed for both aesthetics and function, this upgrade allows for adjustable battery height using the included black aluminum shims. Also included are screws in various lengths to ensure a precise fit. Best of all, battery changes can...
€15.99
*
currently 2x in stock
Revolution Design 0688M - Ultra Shock Cap - Membrane Set (for 4 shocks)
Fits the Revolution Design Ultra Shock Caps RDRP0688.
€14.99
*
currently 1x in stock
Revolution Design 0688S - Ultra Shock Cap - Screw and Seal Set (for 4 shocks)
Fits the Revolution Design Ultra Shock Caps RDRP0688.
€4.99
*
currently 1x in stock
Revolution Design 0704 - Asso B7 - LCG Rear Shock Tower - Carbon Fiber - High-Grip Tracks
LCG Rear Shock Tower - Carbon Fiber - High-Grip Tracks
€19.99
*
currently 1x in stock
Revolution Design 0703 - Asso B7 - LCG Front Shock Tower - Carbon Fiber - High-Grip Tracks
LCG Front Shock Tower - Carbon Fiber - High-Grip Tracks
€19.99
*
currently 1x in stock
Revolution Design 0688 - Asso RC8B4.1 - Ultra Shock Cap Set (4 pcs)
Features: Special hard membranes in a honeycomb design for improved shock response Can be used as aeration shocks with included seals and bleed screw Made from high-quality 7075-T7 aluminum for maximum strength and durability...
€45.99
*
currently 1x in stock
Revolution Design 0643-MK - Asso B7 - Ultra Titan Turnbuckle - 3.5x48mm - Markus Kaerup Edition...
Ultra Titan Turnbuckle - 3.5x48mm - Markus Kaerup Edition
€44.99
*
currently 1x in stock
Revolution Design 0679 - Asso B7 - Aluminium Differential Case
Features: Made from 7075-T6 aluminum for maximum durability Hard anodized for added protection and longevity Laser-etched RDRP logo for a premium look Improved heat dissipation for consistent handling Sealed differential case for reduced...
€29.99
*
currently 2x in stock
Revolution Design 0683 - Asso B7 - Titanium Slipper Spring Adapter Set
Titanium Slipper Spring Adapter Set
€7.99
*
currently 1x in stock
Revolution Design 0685 - Asso B7 - Aluminium Idler Gear 26T
Aluminium Idler Gear 26T
€8.99
*
currently 1x in stock
Revolution Design 0689 - Asso RC8B4.1 - Front Aluminium Shock Mount (2 pcs)
Front Aluminium Shock Mount (2 pcs)
€12.99
*
currently 1x in stock
Revolution Design 0691 - Asso RC8B4.1 - Titanium Anti-Roll Bar Screws (4 pcs)
Titanium Anti-Roll Bar Screws (4 pcs)
€14.99
*
currently 1x in stock
Revolution Design 0692 - Asso RC8B4.1 - Aluminium Wing Plate
Aluminium Wing Plate
€9.99
*
currently 1x in stock
Revolution Design 0696 - Asso RC8B4.1 - Aluminium Rear Brace Mount
Features Precision fit for easy installation Enhanced durability and performance Laser-etched logo for premium factory appearance Specifications Made from high-quality aluminium for improved rigidity Black anodized finish with chamfered...
€18.99
*
currently 1x in stock
Revolution Design 0651 - Associated B7 - Steel Bulkhead 0°
The bulkhead weight 26g and increases the steering on tracks with lots of grip.
€24.99
*
currently 1x in stock
Revolution Design 0666 - XRAY XB2 2024 - Alu 7075 Bellcrank Set
The aluminum parts are much more stable and durable than the plastic parts from the kit. This improves the steering and makes it more precise.
€24.99
*
currently 1x in stock
Revolution Design 0667 - XRAY XB2 2024 - Alu 7075 Steering Plate
The aluminum part is much more stable and durable than the plastic part from the kit. This improves the steering and makes it more precise.
€19.99
*
currently 1x in stock
Revolution Design 0669 - XRAY XB2 2024 - Slipper Eliminator Set
The ideal solution for all stock racers - the slipper eliminator reduces the rotating mass and offers an efficient drivetrain. It is compatible with the original drive shaft as well as the XRAY spurs.
€24.99
*
currently 1x in stock
Revolution Design 0677 - Asso B7 - Idler Shaft Hard Coated (3 pcs)
hard coated for increased durability hollowed for lower weight increases performance direct replacement
€10.99
*
currently 1x in stock
Revolution Design 0678 - Asso B7 - 2-Gear Differential Cross Pin Set (2 pcs)
2-Gear Differential Cross Pin Set (2 pcs)
€4.99
*
currently 1x in stock
Revolution Design 0676 - Asso - Ultra Shock Piston 13mm blank 2.5mm (2 pcs)
Ultra Shock Piston 13mm blank 2.5mm (2 pcs)
€8.99
*
currently 1x in stock
Revolution Design 0681 - Asso B7 - Ultra Servo Mount Aluminum
made from 7075 aluminum increased stability of the servo weight: 5.2g
€24.99
*
currently 1x in stock
Revolution Design 0642 - XRAY XB2 2024 - Carbon Fiber Battery Mount (1 pair)
Carbon Fiber Battery Mount (1 pair)
€16.99
*
currently 1x in stock
Revolution Design 4001 - Race Team Hat
Black Cap with adjustable backside. White stitched brandlogo on the front. White/blue stitched brandlogo on the left side.
€24.99
*
currently 1x in stock
Revolution Design 0636 - Associated B7 - Carbon HD Front Shock Tower
Associated B7 - Carbon HD Front Shock Tower
€19.99
*
currently 1x in stock
Revolution Design 0637 - Associated B7 - Carbon HD Rear Shock Tower
Associated B7 - Carbon HD Rear Shock Tower
€19.99
*
currently 1x in stock
Revolution Design 0638 - Associated B7 - FMP Motor Plate Carbon
Associated B7 - FMP Motor Plate Carbon
€19.99
*
currently 1x in stock
Revolution Design 0664 - XRAY XB2 2024 - Clamping Servo Horn - 25T
Hole spacing: ca. 15mm Fits: Ruddog Products, SAVÖX, Reedy etc.
€15.99
*
currently 1x in stock
Revolution Design 0665 - XRAY XB2 2024 - Clamping Servo Horn - 23T
Hole spacing: ca. 15mm Fits: SANWA, JR
€15.99
*
currently 1x in stock
Revolution Design 0644 - Associated B7 - Titanium Upper Shock Mount Screw (4 pcs)
Titanium Upper Shock Mount Screw (4 pcs)
€13.99
*
currently 1x in stock
Revolution Design 0645 - Associated B7 - Titanium Lower Shock Mount Screw - Set
Titanium Lower Shock Mount Screw - Set
€16.99
*
currently 1x in stock
Revolution Design 0646 - 1/8 Titanium Droop Screw M4x12mm (4 pcs)
1/8 Titanium Droop Screw M4x12mm (4 pcs)
€14.99
*
currently 2x in stock
Revolution Design 0647 - Associated B7 - Slipper Eliminator Set
Slipper Eliminator Set Fits Kimbrough Spurs
€24.99
*
currently 1x in stock
Revolution Design 0643-BLK - Associated B7 - Ultra Titan Turnbuckle - 3.5x48mm - black (6 pcs)
Ultra Titan Turnbuckle - 3.5x48mm (6 pcs)
€39.99
*
currently 1x in stock
Revolution Design 0643-BLU - Associated B7 - Ultra Titan Turnbuckle - 3.5x48mm - Blue (6 pcs)
Ultra Titan Turnbuckle - 3.5x48mm (6 pcs)
€39.99
*
currently 1x in stock
Revolution Design 0650 - Associated B7 - Aluminium Bulkhead +/- 2.5° - black
The bulkhead ist made from 7075 T6 aluminium. It is rigid and durable.
€19.99
*
currently 1x in stock
Revolution Design 0652 - Associated B7 - Steel Bulkhead +/- 2.5°
The bulkhead weight 26g and increases the steering on tracks with lots of grip.
€24.99
*
currently 1x in stock
Revolution Design 0653 - Associated B7 - Aluminium HD Suspension Mount C - black
The mount is made from 7075 aluminium and offers increased longevity as well as sturdiness.
€18.99
*
currently 1x in stock
Revolution Design 0654 - Associated B7 - -1° Aluminium HD Suspension Mount C - black
The mount is made from 7075 aluminium and offers increased longevity as well as sturdiness. The mount is wider than the original one and reduces the toe in at the rear axle by 1° for each side. This makes a 0° toe in configuration possible.
€18.99
*
currently 1x in stock
Revolution Design 0655 - Associated B7 - Aluminium HD Suspension Mount D - black
The mount is made from 7075 aluminium and offers increased longevity as well as sturdiness.
€18.99
*
currently 1x in stock
Revolution Design 0656 - Associated B7 - Steel HD Suspension Mount C
The mount is made from steel and offers increased longevity as well as sturdiness. Weight: 9.5g
€23.99
*
currently 1x in stock
Revolution Design 0657 - Associated B7 - Steel HD Suspension Mount D
The mount is made from steel and offers increased longevity as well as sturdiness. Weight: 9.5g
€23.99
*
currently 1x in stock
Revolution Design 0658 - Associated B7 - Ball-Raced Anti-Roll Bar Mount - Rear - Set
The mount is made from 7075 T6 aluminium. The set includes two pieces of 4x7x2.5mm ball bearings, which let the anti-roll bar move more free and precise.
€18.99
*
currently 1x in stock
Revolution Design 0660 - Associated B7 - Clamping Servo Horn - 25T
Hole spacing: 15.5mm Fits: Ruddog Products, SAVÖX, Reedy etc.
€12.99
*
currently 1x in stock
Revolution Design 0661 - Associated B7 - Clamping Servo Horn - 23T
Hole spacing: 15.5mm Fits: SANWA, JR
€12.99
*
currently 1x in stock
Revolution Design 0662 - Associated B74.2 - Clamping Servo Horn - 25T
Hole spacing: 20mm Fits: Ruddog Products, SAVÖX, Reedy etc.
€12.99
*
currently 3x in stock
Revolution Design 0663 - Associated B74.2 - Clamping Servo Horn - 23T
Hole spacing: 20mm Fits: SANWA, JR
€12.99
*
currently 1x in stock
Revolution Design 0670 - Associated B7 - Aluminium Shock Tower - Front
Features: - increased durability - predictable handling
€19.99
*
currently 1x in stock
Revolution Design 0671 - Associated B7 - Aluminium Shock Tower - Rear
Features: - increased durability - predictable handling
€22.99
*
currently 1x in stock
Revolution Design 0648 - Associated B7 - Ultra Battery Mount Set
The aluminium mount is much more stable than the plastik version from the kit. It is sutible for any shorty battery. The set includes shims and screws for three different height options. The battery can be changed without any tools.
€34.99
*
currently 1x in stock