COMPOSITE BALL JOINT 4.9MM - CLOSED WITH HOLE (4 pieces)

XRAY T2 Alu Scheiben - 3x6x2.0mm (10 Stück)

ALU SHIM 3x6x4.0MM - SILVER (10)

ALU SHIM 3x6x4.0MM - BLACK (10)

COMPOSITE SET OF SHIMS 3x 3x6x1MM; 1x 3x6x2MM (2)

ALU 4.9MM BALL END - BLACK (2)

BALL JOINT 4.9MM - OPEN (4)

XB4 2016 - Graphite Gear Diff Gears - LOW (2+4) Replacement for 304931

COMPOSITE GEAR DIFF CROSS PIN

DIFF GASKET (4)

Genuine XRAY spares!

ANTENNA MOUNT - THIN

Antenna

BODY CLIP FOR 6MM BODY POST (4 pieces)

XB2 Adjustable Turnbuckle - 55mm - M3 - L/R HUDY Federstahl

Super-compact rear upright made from specially-formulated composite material features multiple set-up options for upper & lower roll centers. Upper roll center is adjusted with the camber linkage via shims in all directions – up/down & in/out. Lower roll center is adjustable via eccentric inserts in 9 different positions – up/down & in/out. The race-proven, 2-piece design...

Alu Rear Hub Plate for Multi Adjustable Upright 1-H - Alu 7075 T6

Genuine XRAY spares!

Spare part for 320901

XB2 Front Suspension Pivot Pin (2 pieces)

Specially-designed 2WD/4WD rear wheels with 12mm internal hex. The center countersunk area was redesigned to place the wheel nut deeper. Precision fit, perfect for high-competition racing. Made from flexible, durable material to withstand impacts. The side of the wheel is aerodynamic for maximum performance. Offical replacement for XRAY 369913

Specially-designed 2WD/4WD rear wheels with 12mm internal hex. The center countersunk area was redesigned to place the wheel nut deeper. Precision fit, perfect for high-competition racing. Made from flexible, durable material to withstand impacts. The side of the wheel is aerodynamic for maximum performance.

XB4 ALU SERVO SAVER ADJUSTABLE NUT

SERVO SAVER SPRING C=14

Adj. Turnbuckle M3 L/R 45mm - Hudy Spring Steel™ (2)

Brake/Throttle Arms & Steering Servo Arms - Set

Clutch Bell Ball-Bearing MR105ZZ 5x10x4 (2)

XB4 2016 - Tuning rear graphite upper deck - 2.0mm

Composite Rear Lower Brace

Composite Chassis Side Guards L+R - hard

Composite Chassis Brace Front - hard

Composite Chassis Brace Rear - hard

Graphite Chassis Wire Cover - 2.0mm

BODY MOUNT, BATTERY MOUNT & WING SHIM (2)

Body Mount - extra Short

Graphite Damper Stay - Front - 3.5mm Replacement part for XRAY 362080 and 362081. Small modifications necessary!

Composite Front Suspension Arm Lower - hard

COMPOSITE C-HUB 9° DEG. RIGHT - Hard

COMPOSITE C-HUB 9° DEG. LEFT - Hard

COMPOSITE STEERING BLOCK

Fits left and right - direct replacement for XRAY 362250 and therefore fits all XB4 versions, including the 2022. Made from alloy, which makes it much more stiffer and creates more precision. The setup stays stable.

ALU CONICAL SHIM 3x6x2.0MM (10)

STEEL STEERING BUSHING - SHORT (2)

STEEL STEERING BUSHING - LONG (2)

ECCENTRIC BUSHING SET (2)

ANTI-ROLL BAR 1.8 MM

COMPOSITE SERVO SAVER

ALU SERVO SAVER MAIN SHAFT

COMPOSITE STEERING PLATE

XB4 2016 Graphite Steering Brace - 2.0mm Official Replacement for XRAY 302580

ADJUSTABLE TURNBUCKLE 50MM M3 L/R - HUDY SPRING STEEL™ (2)

BALL END 4.9MM WITH THREAD 6MM (2) XRAY 302653 has been replaced by this item.

BALL END 4.9MM WITH THREAD 8MM (2) Replacement for XRAY 302654

BALL END 4.9MM WITH THREAD 10MM (2)

Graphite Damper Stay Rear - 3.0mm

Rear lower suspension arms made from specially-formulated composite mixture, perfect for high-traction conditions. The arms make the car more stable and increase cornering speed. Intelligent arm design allows for variable positioning of the rear shocks. Depending on track conditions, the rear shocks can be installed either in front of or behind the rear shock tower, and the...

Genuine spare and option parts by XRAY!

Rear lower suspension arms made from specially-formulated composite mixture, perfect for high-traction conditions. The arms make the car more stable and increase cornering speed. Intelligent arm design allows for variable positioning of the rear shocks. Depending on track conditions, the rear shocks can be installed either in front of or behind the rear shock tower, and the...

BALL UNIVERSAL 5.8MM WITH BACKSTOP (2)

polycarbonate REAR WING (2)