"One Size Fits Most"

PRE-GLUED VTA tires for 1:10 touring!

PRE-GLUED VTA tires for 1:10 touring!

PRE-GLUED VTA tires for 1:10 touring!

PRE-GLUED VTA tires for 1:10 touring!

1971 Pontiac Firebird Trans Am Clear Body 200mm The body will be delivered unpainted and uncut. Rear Wing, decal sticker and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery.

1971 Chevrolet Camaro Z28 Clear Body 200mm Length: 438mm Width: 205mm Height: 106mm Wheelbase: 258mm The body will be delivered unpainted and uncut. Decal sticker and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery.

1968 Ford Mustang - 200mm Karosserie - Youngtimer Length: 431mm Width: 205mm Height: 106mm Wheelbase: 260mm The body will be delivered unpainted and uncut. Decal sticker and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery.

1969 Chevrolet Camaro Z28 Clear Body 200mm Length: 438mm Width: 203mm Height: 112mm Wheelbase: 258mm The body will be delivered unpainted and uncut. Decal sticker and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery. Please note: During the production process it might be possible that...

EUROPA M - M-Chassis Body Scale: 1:10 Mini Width: 176mm Wheelbase: 210-225mm The body will be delivered unpainted and uncut. Rear Wing, decal sticker (headlights, rear lights, grill) and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery.

Here is the list of modifications needed to fit the: Pro-Line Extended Body Mounts for Slash® 2wd Traxxas® Bandit® Front Arms - #2531X Traxxas® Bandit® Rear Arms - #2750R Traxxas® Bandit® Front Caster Blocks - #2432 Traxxas® Bandit®Steering Blocks - #3636 Traxxas® Bandit® Axles - #2437 Traxxas® King Pins - #3740 Traxxas® Front Camber Turnbuckles - #2444 Traxxas® Rear...

The body will be delivered unpainted and uncut. Rear Wing, decal sticker and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery. Wheelbase: 325mm Width: 310mm Scale: 1:8 Please check with your wheelbase! This is for short wheelbase - fits on most of the 1:8 GT cars.

1967 Dodge Dart Clear Body 200mm Length: 438mm Width: 203mm Height: 112mm Wheelbase: 258mm The body will be delivered unpainted and uncut. Decal sticker and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery.

What's included? Body Detailed Headlight, Taillight and Window Decal Sheet Window masks Fits: Losi 22S Length: 637mm Width Front: 280mm Width Rear: 285mm Wheelbase: 335mm The body will be delivered unpainted and not cut. Window masks and decal sheet are included.

What's included? Body Detailed Headlight, Taillight and Window Decal Sheet Window masks Fits: Losi 22S Length: 637mm Width Front: 280mm Width Rear: 285mm Wheelbase: 335mm The body will be delivered unpainted and not cut. Window masks and decal sheet are included.

Mini Z Body Scale: 1:28 Width: 79.5mm Wheelbase: ca. 98mm The body will be delivered unpainted and uncut. Rear Wing, decal sticker (headlights, rear lights, grill) and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery.

Anti-Tuck body stiffening for 190mm touring cars This body stiffening is made to avoid the jaming up of the body in the rear wheel arch in case of a collision. :)

Formula F1 front wing / spoiler for 1/10

Formel F1 Rear Wing - white There were three main ingredients the team at PROTOform took into consideration when designing these wings: 1) look awesome, 2) be durable and 3) perform excellently on the track. Starting with the aesthetics, the wings come in a sleek matte black finish. Inspired by real F1 wing styling, this wing will give your 1:10 Formula 1 car an unmistakable...

The new P olycarbonate-Rearwing from Protoform was specially designed for 190mm Touring Cars. There are three configurations possible for your special needs on the track: - Standard - Low-Profile - Forward-Facing Wicker Pre-Cut, with 2x 20x40mm end plates (not mounted). Not painted. IFMAR/EFRA/ROAR legal.

Aerodynamic package for the GT-R R35 body (1585-00): - increased stability - precise fit - easy to install Will be delivered unpainted and untrimmed. Includes hardware for mounting.

Crosshair Body Mounting Kit - suitable for 6mm body posts. Please note! The magnets are made from neodymium which makes them extremly magnetic. This is necessary for the little magnets so they can hold a body in position. A second feature of neodymium is, it is extremly brittle. The magnets are very strong and it only takes to magnets to connect in an akward way to let them...

This set of Body Support Foam is used to eliminate the gap between your car’s foam bumper and the inside of your race body. Keeping the front of your race body supported is extremely important for both increasing durability and keeping the aerodynamic integrity of the body intact. By using the Body Support Foam, you can eliminate the unwanted “play” that allows the body to...

Fender & Body Post Protectors - 2 sets Content of delivery: - 4x protectors for 4 fender (2 bodies) - 4x protectors for 4 body posts (2 bodies) The last pictures show the position where the protectors are installed. We won't deliver a body.

Iconic Black Tri-Blend T-Shirt (Small)

Iconic Black Tri-Blend T-Shirt (Xtra-Large)

Protoform Grayscale Snapback Hat

The oversized front graphic is printed wiht a water-based ink that's so light you can barely feel it. It's all printed on a super-soft black tri-blend crew neck shirt for an easygoing lock. US-style sizing - rather large for European standards.

The oversized front graphic is printed wiht a water-based ink that's so light you can barely feel it. It's all printed on a super-soft black tri-blend crew neck shirt for an easygoing lock. US-style sizing - rather large for European standards.

The oversized front graphic is printed wiht a water-based ink that's so light you can barely feel it. It's all printed on a super-soft black tri-blend crew neck shirt for an easygoing lock. US-style sizing - rather large for European standards.

The oversized front graphic is printed wiht a water-based ink that's so light you can barely feel it. It's all printed on a super-soft black tri-blend crew neck shirt for an easygoing lock. US-style sizing - rather large for European standards.

The front features a small Protoform Icon on the left chest along with contrasting white zipper and drawstrings, while the back displays a vintage style racing crest. It's printed on a super soft and relaxed unisex hoodie, spun from a plush poly-cotton blend. US-style sizing - rather large for European standards.

The front features a small Protoform Icon on the left chest along with contrasting white zipper and drawstrings, while the back displays a vintage style racing crest. It's printed on a super soft and relaxed unisex hoodie, spun from a plush poly-cotton blend. US-style sizing - rather large for European standards.

The front features a small Protoform Icon on the left chest along with contrasting white zipper and drawstrings, while the back displays a vintage style racing crest. It's printed on a super soft and relaxed unisex hoodie, spun from a plush poly-cotton blend. US-style sizing - rather large for European standards.

Protoform 9985-01 - Aero Matters T-Shirt (Small) Cause AERO matters :-)