30x30x10mm fan with Hobbywing compatible plug and short wire.

30x30x10mm fan with BEC plug and black wire. 6.0-8.4V input.

40x40x10mm fan with BEC plug and black wire. 6.0-8.4V input.

Technical specs: _ 540 style _ 3.175mm shaft diameter _ brushed design

Carson 906000 - Truck Machine - Brushed Motor

Cup Machine / CE4 / CE-4 - Brushed Motor

ESC + Motor + Programming Card - Tamiya Euro Cup legal! WILL BE OFFERED BULK . without BOX!

12T - 3700kV - for 2S LiPo - 380W

18T Motor - Tamiya Euro Cup legal! WILL BE OFFERED BULK . without BOX!

Waterproof! Brushed only. 70A cont. current 2-3S LiPo 6V @ 3A BEC

Just a simple brushless combo for a reasonable price. Made for 2S LiPo batteries. 540er style motor for 1/10.

Just a simple brushless combo for a reasonable price. Made for 2S LiPo batteries. 540er style motor for 1/10.

Suitable for Carson Dragster Turbo ESC to adjust some fine settings. Not necessary for the general setting.

High quality silicone extremely soft and flexible silver plated terminal

High quality silicone extremely soft and flexible silver plated terminal

Setting up all parameters of your ESC made easy with this digital programmer.The bright LCD screen let you run through all the programs and within seconds the values have been changed. This programmer can also be used as interface between your PC and the ESC to update your firmware or to do even more set-ups. The TC Smart Box offers six-in-one functions: ESC Settings Servo...

Features: Application and Level: 1/8 High-End Motor Type: Sensored and Sensorless Brushless Motor Control: Forward - Brake Firmware Update: supported Telemetrie-Aux: No Data Logging: Yes, Realtime Real-Time Data: Status, Voltage, Throttle Status, RPM/Min., Current (A) Measurements: 55x42x36mm Wire: 10 AWG Weight: 117g Input: 2-4S LiPo Current Cont. (A): 240 A Burst (A): 1100...

Ultra High Speed Cooling Fan - Alu - 30x30x10mm

The alloy case isn't just an optical highlight, it also increases the durability of the fan. The fan spins at 29,000 RPM at 8.4V and features a dual ball bearing design. A fan is meant to be a wearing part and is not build for a long lifetime. Due to mechanical damages, burned electronics, missing grease or due to bumps, the fan can wear of with time. In a RC Car a fan can...

The alloy case isn't just an optical highlight, it also increases the durability of the fan. The fan spins at 29,000 RPM at 8.4V and features a dual ball bearing design. A fan is meant to be a wearing part and is not build for a long lifetime. Due to mechanical damages, burned electronics, missing grease or due to bumps, the fan can wear of with time. In a RC Car a fan can...

The alloy case isn't just an optical highlight, it also increases the durability of the fan. The fan spins at 25,000 RPM at 8.4V and features a dual ball bearing design. A fan is meant to be a wearing part and is not build for a long lifetime. Due to mechanical damages, burned electronics, missing grease or due to bumps, the fan can wear of with time. In a RC Car a fan can...

The alloy case isn't just an optical highlight, it also increases the durability of the fan. The fan spins at 25,000 RPM at 8.4V and features a dual ball bearing design. A fan is meant to be a wearing part and is not build for a long lifetime. Due to mechanical damages, burned electronics, missing grease or due to bumps, the fan can wear of with time. In a RC Car a fan can...

MOLAN SS-3.0 - 1/10 Competition Brushless Motor - Modified - 3.5 Turns - 9300KV Tech Specs: Use for : 1/12, 1/10 Turns: 3.5T Cells: max. 2S Type: Sensored Weight: 160g Motor KV: 9300KV ( 68820 RPM @ 7.4V) Max. Current (A): 130A Rotor Shaft: 3.17mm

MOLAN SS-3.0 - 1/10 Competition Brushless Motor - Modified - 4.5 Turns - 7750KV Tech Specs: Use for : 1/12, 1/10 Turns: 4.5T Cells: max. 2S Type: Sensored Weight: 160g Motor KV: 7750KV ( 57350 RPM @ 7.4V) Max. Current (A): 110A Rotor Shaft: 3.17mm

Technical Data: Advised for: 1/12, 1/10 Type: Sensored Type: 540 Shaft: 3.17mm

Technical Data: Advised for: 1/12, 1/10 Type: Sensored Type: 540 Shaft: 3.17mm

Technical Data: Advised for: 1/12, 1/10 Type: Sensored Type: 540 Shaft: 3.17mm

Dynospeed 805 1/8 Competition Brushless On-Road Motor - 4 Poles - 1750KV Tech Specs: Use for : 1/8 Cells: 2-4S Type: Sensored Weight: 326g Motor KV: 1750KV ( 25900 RPM @ 14.8V) Max. Current (A): 92A Rotor Shaft: 5mm

R-Tune Modified Rotor 5 - 12.5 SM

The new RS-Tune brushless motors from DASH. Turns: 17.5T Size: 540 Type: Sensored Brushless

The new RS-Tune brushless motors from DASH. Turns: 21.5T Size: 540 Type: Sensored Brushless

Dash 540 Motor Screw Allen Cilinder M2.5x45mm Golden Alu 7075 (3 pieces)

New from Dash is the AI Pro V2 brushless speed controller. The latest innovation in competition brushless speed control Utilising State-of-the-Art 32bits micro-controllers, and a robust software, The V2 ESC delivers the most technologically advanced features to date. The Signature Golden-Black V2 ESC features an Electrolytic Two-Step Anodizing heatsink case, improving heat...

The ESC utilizes state of the art 32 bits MCUs (micro-controller), allowing software and hardware technology to be fully explored. The ideology behind the software came from the well-established AI PRO ESC. With that said, AI MAX adopted the Boost and Turbo functions and it will work similary to that of the AI PRO. Using only the best available components and materials, the...

Utilizing state of the art 32bit (Micro-Controllers) MCUs right from the beginning, Dash is able to explore new technology and development in both software and hardware design. Understanding the needs in competition today, the Dash AI is designed to meet all competition needs. Ingredients for Speed: Ultra-fast 32 bit MCUs High capacity MOS FET Internal adjustable 6V/7V 3.0A...

Utilizing state of the art 32bit (Micro-Controllers) MCUs right from the beginning, Dash is able to explore new technology and development in both software and hardware design. Understanding the needs in competition today, the Dash AI is designed to meet all competition needs. Ingredients for Speed: Ultra-fast 32 bit MCUs High capacity MOS FET Internal adjustable 6V/7V 3.0A...

Suitable for DASH AI PRO V2

Suitable for DASH AI MAX

Suitable for DASH AI PRO

Suitable for DASH AI PRO

Ultra High Speed Cooling Fan - Alu - 30x30x10mm

Ultra High Speed Cooling Fan - 40x40x10mm

Ultra High Speed Cooling Fan - 25x25x10mm

Suitable for DASH AI PRO

Charging Lead 60cm for 2S LiPo - US-Style Plug - XH / XH-Balancer - 12AWG

Charging Lead 60cm for 2S LiPo - Traxxas Plug - XH / XH-Balancer - 12AWG

Charging Lead 60cm for 2S LiPo - 4/5mm Plug - XH / 2mm Balancer - 12AWG

Suitable for DASH AI PRO and any other ESC :-)

Suitable for DASH AI PRO and any other ESC :-)

Suitable for DASH AI PRO and any other ESC :-)

Suitable for DASH AI PRO and any other ESC :-)

Dash Program Card Wire 200mm

Anti-Tweak Sensor Wire

Anti-Tweak Sensor Wire

- ESC for Brushless DC Motors - designed for sensored motors from 4.5T up - designed especially for 1/10 rc cars - tft lcd color display - easy programming and real time monitoring directly on the display of ESC - advanced cooling technolody based on Aluminium Nitride Ceramic cooler - power supply: 2S LiPo - current constant / pulsed: 180A / 1500A - bec: 7.4V fixed, 4A cont....

Fan Mount Clamp on Set, 1/10 Buggies, Trucks - black Special clamp on alloy fan mount for today's buggies and sedans. The included mounting bracket has multi-mount features that allows the fan to be angled or parallel with the motor can. Lightweight, secure and just what you needed to easily mount a fan in tight spaces! The angled design allows easy mounting of fans in 2wd...

Fan Mount Clamp on Set, 1/10 Buggies, Trucks - blue Special clamp on alloy fan mount for today's buggies and sedans. The included mounting bracket has multi-mount features that allows the fan to be angled or parallel with the motor can. Lightweight, secure and just what you needed to easily mount a fan in tight spaces! The angled design allows easy mounting of fans in 2wd...

Fan Mount Clamp on Set, 1/10 Buggies, Trucks - orange Special clamp on alloy fan mount for today's buggies and sedans. The included mounting bracket has multi-mount features that allows the fan to be angled or parallel with the motor can. Lightweight, secure and just what you needed to easily mount a fan in tight spaces! The angled design allows easy mounting of fans in 2wd...

New V2 mount with larger double screw mounting bar. The extra modular design means that with a few adjustments you can mount a fan securely in any 1/8 truggy and most e-buggies and the mount positions the fans 10-14mm away from your motor can. This proper spacing helps insure the fan does not lose rpms due to magnetic interference from your motor. A fan that is placed to...