This Hop-Up Option set is for use with Tamiya XV-02 and TT-02 chassis cars. The Ball Differential option provides your model more stable rear grip thanks to its limited slip differential effect compared to the standard oil-filled gear differential. Use this option part for loose surface conditions. • Differential Joint A & B x1 each • Ball Differential Ring Gear (39T) x1 •...

This Hop-Up Option set is for use with Tamiya XV-02 and TT-02 chassis cars. The Ball Differential option provides your model more stable rear grip thanks to its limited slip differential effect compared to the standard oil-filled gear differential. Use this option part for loose surface conditions. • Differential Joint A & B x1 each • Ball Differential Ring Gear (39T) x1 •...

se this Hop-Up Option set to allow superior acceleration on low-grip surfaces and improved stability under braking. The use of a front direct coupler (A.K.A spool) replaces the oil-filled gear differential, found in the XV-02 base kit. By eliminating the differential action, at the front of the car, the car will have more stable braking power and increased forward drive...

This is a new gear differential unit for use on the XV-02 and TT-02 chassis. When using it on the TT-02 chassis, it allows you to tune the differential action, for the front and rear, with the use of different viscosity oils. When using it on the XV-02, you can use it not only for the front and rear diffs, but also as a center oil-filled diff unit, which will give you even...

Replace the ring gear of the kit-standard differential gear unit with this spur gear to change it to a center differential setup, balancing front and rear wheel speeds for improved turning. • Center Diff Gear x1 • Differential Case x1 • Gasket x1 • Use this spur gear with Item 22049 as a center differential setup. • Compatible with XV-02 chassis cars. (Use with the...

This spring set is for use with XV-02 chassis rally car. Use this set to fine tune your rally car set-up depending on surface conditions. • Springs (soft, black) x2 • Springs (medium, gold) x2 *kit-standard • Springs (hard, silver) x2 • Length: 40mm. • Compatible with XV-02 chassis cars.

Use this Hop-Up Option set to change the dog-bone type propeller shaft found in the stock XV-02 chassis to a universal propeller shaft for increased stable, and efficient performance. • Aluminum Swing Shaft x1 • Input Shaft x1 • Cross Joint x1 • 2x9.8mm Shaft x1 • 3x2.5mm Grub Screw x1 • Propeller shaft and input shaft have a firm joint for easy maintenance. • Compatible...

This Hop-Up Option is for use with XV-02 chassis. It replaces the stock plastic piece. It is useful for precise center shaft positioning to ensure efficient power transmission. • Aluminum Spur Gear Holder x1 • This spur gear holder firmly holds spur gear for stable gear function. • Compatible with XV-02 chassis cars.

These are double cardan joint shafts. The drive shafts have two joint points, which facilitate smoother operation at higher operating angles and longer life. • 37mm Drive Shafts for Double Cardan Joint Shafts x2 • The same size as 37mm universal drive shaft. • Compatible with XV-02 chassis cars. Use with following Hop-Up Options. Item 42218：Axle Shaft for Double Cardan Joint...

Fine-tuning your rally car can with the use of this Option part can help dial in your car to the course. The suspension mount, designed for the Tamiya XV-02 chassis, made of aluminum, and incorporates resin bushings, which inserted in various positions, allow adjustment of toe and skid angles. By adjusting toe and skid angles, the handling of the XV-02 can be fined tuned...

Use this Hop-Up Option in place of the kit-standard plastic part (A19) to help absorb stress on the damper stay of your XV-02 chassis. It helps ensure stable performance, and even protect your car in unexpected crashes. • Aluminum Damper Stay Mount x1 • Compatible with XV-02 chassis cars. (Can be used either front or rear.)

This Hop-Up Option is for use with the XV-02 chassis. It’s a lightweight, rigid 3.5mm thickness carbon fiber damper stay (shock tower), which gives more setup options compared to the standard plastic damper stay. • Carbon Damper Stay (Front) x1 • 5mm Ball Connectors x4 • 3x10mm Hex Head Screws x4 • 5.5x2.0mm Spacers x2 • Gives more setup options with three damper attachment...

This Hop-Up Option is for use with the XV-02 chassis. It’s a lightweight, rigid 3.5mm thickness carbon fiber damper stay (shock tower), which gives more setup options compared to the standard plastic damper stay. • Carbon Damper Stay (Rear) x1 • 5mm Ball Connectors x4 • 3x10mm Hex Head Screws x4 • 5.5x2.0mm Spacers x2 • Gives more setup options with five damper attachment...

This Hop-Up Option is for use with the XV-02 chassis. These precision, lightweight aluminum steering arms give secure attachment, as well as direct steering feel, superior durability, and smooth performance. • Aluminum Steering Arms Left & Right x1 each. • Features Tamiya blue anodized finish. • Features built-in ball bearings. • Compatible with XV-02 chassis cars.

This Hop-Up Option is for use with the XV-02 chassis. It is made of lightweight and rigid 2mm thick carbon fiber and serves as a bumper support that ensures more secure attachment of urethane sponge and body mount. • 2mm thickness carbon fiber bumper support x1 • Rubber bushings x2 • 6mm snap pins x2 • 3x16mm round socket screws x2 • Compatible with XV-02 chassis cars.

This Hop-Up Option is for use with the XV-02 chassis. The carbon fiber-reinforced lower deck gives greater rigidity than the standard XV-02 lower deck and is great for use on surfaces such as carpet and high-grip asphalt. A higher rigidity chassis is best suited when you are driving your car on high traction surfaces. • Carbon Reinforced Lower Deck x1. • Use of Item 54232 M3...

This Hop-Up Option is for use with the XV-02 chassis and is mainly oriented for on-road performance. The lightweight, rigid 3.5mm thickness carbon fiber damper stays give more setup options compared to the standard plastic damper stays. • Carbon fiber damper stay (front) x1. • Carbon fiber damper stay (rear) x1. • Piston rods (30.5mm) x4 • 5x6.55mm ball connector nuts (blue)...

Genuine Tamiya optionals!

Spare part for XV-02.

Spare part for XV-02 and TT-02 used with 22049.

Spare part for XV-02.

Spare part for XV-02.

Spare part for XV-02.

Spare part for XV-02.

These 37mm swing shafts are used in the XV-02 chassis. Replace them periodically to ensure that your car runs at peak performance. • Using with Item 54874 (TT-02 Adjustable Upper Arm Set) on the TT-02 chassis allows a wider range of camber angle adjustment. • Compatible with TT-02 (use with Item 54623 and 51444) and XV-02 chassis cars.

Spare part for XV-02.

Spare part for XV-02 and TT-02 used with 22046.

Spare part for XV-02.

Spare part for XV-02 and TT-02 used with 22047. TT-02 will be used only with the 39T gear.

Spare part for XV-02.

Spare part for XV-02.