Needs to be used with a Windows 7 or Windows 10 OS.

4.8-8.4V operating voltage 0.052sec / 60° @ 8.4V 3kg-cm @ 8.4V 20x17.8x8mm 7g

4.8-8.4V operating voltage 0.073sec / 60° @ 8.4V 19kg-cm @ 8.4V 40.8x20.2x26.5mm 50g 25T gear metal gear ball bearings low profile style

4.8-8.4V operating voltage 0.070sec / 60° @ 8.4V 20kg-cm @ 8.4V 40.8x20.2x26.5mm 57g 25T gear metal gear ball bearings brushless motor full metal case low profile style

Needs to be used with a Windows 7 or Windows 10 OS.

4.8-8.4V operating voltage 0.18sec / 60° @ 7.4V 14kg-cm @ 7.4V 40.8x20.2x29.0mm 44g 25T gear metal gear ball bearings low profile style

4.8-8.4V operating voltage 0.11sec / 60° @ 8.4V 18kg-cm @ 8.4V 40.8x20.2x26.5mm 51g 25T gear metal gear ball bearings low profile style

4.8-8.4V operating voltage 0.068sec / 60° @ 8.4V 33kg-cm @ 8.4V 40.8x20.2x29.5mm 66g 25T gear metal gear ball bearings brushless motor full metal case low profile style

Two versions for different Servo splines are available. 23T suitable for: Sanwa / KoPropo / Airtronics / Graupner / Spektrum 25T suitable for: Futaba / MKS / PowerHD / Savöx / SRT

Two versions for different Servo splines are available. 23T suitable for: Sanwa / KoPropo / Airtronics / Graupner / Spektrum 25T suitable for: Futaba / MKS / PowerHD / Savöx / SRT

Adjustable from 17-20mm. Clamp type.

Adjustable from 17-20mm. Clamp type.

Included: 2 channel 2.4 GHz transmitter, 5-channel receiver and multilingual instructions Features: - Programmable Failsafe PRO+ with undervoltage protection - Dualrate, trim function, Servoreverse - 5 channel receiver - Charging jack - Ball beared control unit for precise steering - Control unit ergonomic adjustable - blue illuminated operation indicator Technical data: •...

Included: 3-channel 2.4 GHz LCD transmitter, waterproof 5-channel BEC receiver, waterproof CS-6 servo and instructions Features: 1. 1 additional switch channel for special functions 2. Two gradually adjustable, fully-proportional channels 3. Servo reverse (reverses the direction of travel) and trim function 4. Dual rate channel 1-2 (limits the servo travel) 5. Ergonomically...

The Reflex X1 can be operated on two continuously adjustable, fully proportional channels. It features a servo reverse for both channels, which reverses the direction of the vehicle to make it easier to control. There is also an adjustable trimmer for the throttle and steering system, as well as an adjustable dual rate function (servo travel limit), allowing you to configure...

3000mAh NiMH Battery 220V charger 4x 1.5V rechargeable batteries for transmitter Reflex Pro 3 Transmitter Reflex Pro 3 4ch Receiver

2500mAh NiMH Battery USB charger (250mA) 4x 1.5V batteries for transmitter

Features: - Available in 4 colors - 3 channel receiver - Integrated Failsafe - TAMIYA KIT comatible Technical data: - Operating Voltage of transmitter 4,8 up to 6 V - two continuously controllable fully proportional channels - servo reverse for both channels (reversal of the running direction) - trimming function for accelerator and steering - Dual Rate for both channels...

The Reflex X1 can be operated on two continuously adjustable, fully proportional channels. It features a servo reverse for both channels, which reverses the direction of the vehicle to make it easier to control. There is also an adjustable trimmer for the throttle and steering system, as well as an adjustable dual rate function (servo travel limit), allowing you to configure...

Technical Details: 4-Channel Receiver Current supply up to 11,1V Measurements: ca. 35x25x10 mm Weight: ca. 10 g

Technical Details: 5-Channel Receiver BEC Measurements: ca. 45x27x14 mm Weight: ca. 25 g

Technical Details: Length: 35mm Width: 20mm Height: 13mm Weight: 6g

Technical Details: 4-Channel Receiver Telemetry Current supply up to 4,8 - 8,4 V Measurements: ca. 35 x 30 x 13mm Weight: ca. 10 g

Operating Voltage: 4.8-6.0V Torque: 3kg Speed: n/a Weight: 35g Size: 38.5x19x25mm Standard type, with plastic gear.

Operating Voltage: 4.8-6.0V Torque: 3kg Speed: n/a Weight: 35g Size: 38.5x19x25mm Low Profile type, with metal gear.

Teeth: 21 Fits: 1/12 and 1/10 RC Cars Servo: f.e. NOVAK NES-1-A and other servos with 21 spline

Teeth: 23 Fits: 1/12 and 1/10 RC Cars Servo: f.e. SANWA, KOPropo, JR and other servos with 23 spline

Teeth: 23, 24 or 25 Fits: 1/10 and 1/8 RC Cars Servo: servos with 23, 24 or 25 spline

Teeth: 23, 24 or 25 Fits: 1/10 and 1/8 RC Cars Servo: servos with 23, 24 or 25 spline

Teeth: 23, 24 or 25 Fits: 1/10 and 1/8 RC Cars Servo: servos with 23, 24 or 25 spline

Teeth: 23, 24 or 25 Fits: 1/10 and 1/8 RC Cars Servo: servos with 23, 24 or 25 spline

Teeth: 24 Fits: 1/12 and 1/10 RC Cars Servo: f.e. Hitec and other servos with 24 spline

Teeth: 23-24-25 Fits: 1/10 and 1/8 RC Cars Servo: servos with 23, 24 or 25 spline

Features: Full CNC machined alloy case High Voltage 6.0 - 8.4 V Titanium gears Ball Raced Coreless Motor Ultra high speed and torque Water resistant Technical Data: Voltage Range: 6.0 - 8.4V Speed @ 6.0V: 0.07 sec/60° Speed @ 7.4V: 0.06 sec/60° Speed @ 8.4V: 0.05 sec/60° Torque @ 6.0V: 11.8 kg/cm Torque @ 7.4V: 14.4 kg/cm Torque @ 8.4V: 16.5 kg/cm Dimensions: 40.5x20.5x36mm...

Replacement Gear Set for Corally Servo CS-5016

Features: Full CNC machined alloy case High Voltage 6.0 - 8.4 V Titanium gears Ball Raced Coreless Motor Ultra high speed and torque Water resistant Technical Data: Voltage Range: 6.0 - 8.4V Speed @ 6.0V: 0.09 sec/60° Speed @ 7.4V: 0.08 sec/60° Speed @ 8.4V: 0.07 sec/60° Torque @ 6.0V: 18.3 kg/cm Torque @ 7.4V: 22.6 kg/cm Torque @ 8.4V: 25.6 kg/cm Dimensions: 40.5x20.5x36mm...

Replacement Gear Set for Corally Servo CS-5226

Features: Full CNC machined alloy case High Voltage 6.0 - 8.4 V Steel gears Ball Raced Coreless Motor Ultra high torque Water resistant Technical Data: Voltage Range: 6.0 - 8.4V Speed @ 6.0V: 0.12 sec/60° Speed @ 7.4V: 0.11 sec/60° Speed @ 8.4V: 0.10 sec/60° Torque @ 6.0V: 37.5 kg/cm Torque @ 8.4V: 46.9 kg/cm Dimensions: 40.0x20.0x37.0mm Weight: 73g Servo Power - Torque: >...

Replacement Gear Set for Corally Servo CS-5245

Style: Low Profile Case: Alu (Upper, Middle, Bottom) Operating Voltage: 6.0-8.4V Operating Speed: 0.045sec (8.4V) / 0.055sec (7.4V) / 0.067sec (6.0V) Dynamic Torque: 17.5kg-cm (8.4V) / 16.0kg-cm (7.4V) / 12.5kg-cm (6.0V) Dimension: 41x20x26mm Weight: 52g Spline: 25T

Features: SSR mode compatible for Super fast and smooth steering Response High voltage compatible Servo Suitable for large model aircraft and 1/8 scale vehicles All aluminum housing for excellent durability Durable titanium and alloy gears Heat resistant brushless motor Specification: Aluminum Case (Upper,Middle,Bottom) SSR Operating Voltage: 6.0~8.4V Torque(6.0V): 26.0kg-cm...

Features: HV capabilities Gears crafted from titanium and steel lightweight aluminum housing Operating Voltage: 6.0-8.4V Connection Wire: 180mm length Technical specification: Output Gear: 25T Measurements: 41 x 20 x 26.3 mm Measurements over all: 54.4 x 20 x 31.1mm Weight: 55g Connection Wire Plug: JR Universal Speed 60° / Sec @ 6.0V: 0,073 Speed 60° / Sec @ 8.4V: 0,05...

Features: HV capabilities Gears crafted from titanium and steel lightweight aluminum housing Operating Voltage: 6.0-8.4V Connection Wire: 180mm length Technical specification: Output Gear: 25T Measurements: 41 x 20 x 26.3 mm Measurements over all: 54.4 x 20 x 31.1mm Weight: 55g Connection Wire Plug: JR Universal Speed 60° / Sec @ 6.0V: 0,11 Speed 60° / Sec @ 8.4V: 0,09...

Features: HV capabilities Gears crafted from titanium and steel lightweight aluminum housing Operating Voltage: 6.0-8.4V Connection Wire: 180mm length Technical specification: Output Gear: 25T Measurements: 41 x 20 x 26.3 mm Measurements over all: 54.4 x 20 x 31.1mm Weight: 55g Connection Wire Plug: JR Universal Speed 60° / Sec @ 6.0V: 0,08 Speed 60° / Sec @ 8.4V: 0,06...

Features: HV capabilities Gears crafted from titanium and steel lightweight aluminum housing Operating Voltage: 6.0-8.4V Connection Wire: 180mm length Technical specification: Output Gear: 25T Measurements: 40.7 x 20.5 x 38.9mm Measurements over all: 54.2 x 20.5 x 44.2mm Weight: 84g Connection Wire Plug: JR Universal Speed 60° / Sec @ 6.0V: 0,1 Speed 60° / Sec @ 8.4V: 0,07...

Features: HV capabilities Gears crafted from titanium and steel lightweight aluminum housing Operating Voltage: 6.0-8.4V Connection Wire: 180mm length Technical specification: Output Gear: 25T Measurements: 40.7 x 20.5 x 38.9mm Measurements over all: 54.2 x 20.5 x 44.2mm Weight: 84g Connection Wire Plug: JR Universal Speed 60° / Sec @ 6.0V: 0,17 Speed 60° / Sec @ 8.4V: 0,13...

Features: HV capabilities Gears crafted from titanium and steel lightweight aluminum housing Operating Voltage: 6.0-7.4V Connection Wire: 360mm length Technical specification: Output Gear: 25T Measurements: 40.7 x 20.5 x 38.9mm Measurements over all: 54.2 x 20.5 x 44.2mm Weight: 84g Connection Wire Plug: JR Universal Speed 60° / Sec @ 6.0V: 0,16 Speed 60° / Sec @ 7.4V: 0,14...

Features: HV capabilities Gears crafted from titanium and steel lightweight aluminum housing Operating Voltage: 6.0-7.4V Connection Wire: 360mm length Technical specification: Output Gear: 25T Measurements: 40.7 x 20.5 x 38.9mm Measurements over all: 54.2 x 20.5 x 44.2mm Weight: 84g Connection Wire Plug: JR Universal Speed 60° / Sec @ 6.0V: 0,21 Speed 60° / Sec @ 7.4V: 0,18...

Features: HV capabilities Gears crafted from titanium and steel lightweight aluminum housing Operating Voltage: 6.0-7.4V Connection Wire: 360mm length Technical specification: Output Gear: 25T Measurements: 40.7 x 20.5 x 38.9mm Measurements over all: 54.2 x 20.5 x 44.2mm Weight: 84g Connection Wire Plug: JR Universal Speed 60° / Sec @ 6.0V: 0,25 Speed 60° / Sec @ 7.4V: 0,23...

Features: HV capabilities Gears crafted from aluminum and copper lightweight aluminum housing Operating Voltage: 6.0-7.4V Connection Wire: 360mm length Technical specification: Output Gear: 25T Measurements: 40.7 x 20.5 x 38.9mm Measurements over all: 54.2 x 20.5 x 44.2mm Weight: 84g Connection Wire Plug: JR Universal Speed 60° / Sec @ 6.0V: 0,16 Speed 60° / Sec @ 7.4V: 0,14...

Features: HV capabilities Gears crafted from aluminum and copper lightweight aluminum housing Operating Voltage: 6.0-7.4V Connection Wire: 360mm length Technical specification: Output Gear: 25T Measurements: 40.7 x 20.5 x 38.9mm Measurements over all: 54.2 x 20.5 x 44.2mm Weight: 84g Connection Wire Plug: JR Universal Speed 60° / Sec @ 6.0V: 0,21 Speed 60° / Sec @ 7.4V: 0,19...

AE Heavy Duty Servo Horn - 25 Teeth - 7075 - BLACK For Futaba and all other 25 spline servos.

AE Heavy Duty Servo Horn - 25 Teeth - 7075 - BLUE For Futaba and all other 25 spline servos.

AE Heavy Duty Servo Horn - 23 Teeth - 7075 - BLACK For Aitronics/ Sanwa/ KO and all other 23 spline servos.

AE Heavy Duty Servo Horn - 23 Teeth - 7075 - BLUE For Aitronics/ Sanwa/ KO and all other 23 spline servos.

The FlySky Noble NB4+ is a feature-rich and powerful remote control for the RC car and boat sector. Equipped with the third generation 2.4 GHz AFHDS-3 protocol and in conjunction with the included FGr4B receiver, the NB4+ is suitable as a modern solution for use in teacher-student situations, among other things. The simple operation and clear menu navigation via the...

7 channels based on the ANT protocol - that's the G7P remote control for RC cars and boats. The built-in high-performance chip provides a variety of functions that clearly set this transmitter apart from other comparable devices. An adjustable two-way data transmission ensures that the transmitter and receiver always remain in contact with each other and exchange information...

7 channels based on the ANT protocol - that's the G7P remote control for RC cars and boats. The built-in high-performance chip provides a variety of functions that clearly set this transmitter apart from other comparable devices. An adjustable two-way data transmission ensures that the transmitter and receiver always remain in contact with each other and exchange information...

The FGr4B receiver is the ideal support when using a Flysky remote control. The receiver makes use of a technology used by several Flysky transmitters - the automatic frequency hopping digital system (short: AFHDS3). With a bidirectional transmission system via the antenna, this receiver is specially designed for the installation and output of PWM/PPM/i-bus/S.BUS/i-bus2...