Gone are the days of messy damper rebuilds with this Damper Holder, neatly place your dampers into the holes and with the same plate top and bottom the space used by this holder is limited so you don't knock it over. Also able to place gear differentials in the center hole. Shocks and diff are not included ;-)

This is Yeah Racing Aluminum Bearing and Motor Bearing Inner Size Measurer and Tester For 2-15mm. It can measure different bearing dimension, from 2mm - 15mm. As well as motor bearing, with dimension 3.18mm. Feature: For: 4mm / 4.8mm / 5mm / 6mm Ball End Material: Aluminum Color: BLUE

Will fit for 1:12, 1:10 and 1:8 shocks.

A perfect tool for removing stubborn ball ends with minimum efforts as well as wears on the ball ends. With this tool, you will need only a second to remove ball ends which make it a life saver when you are need a quick fix on the track-side. A must have item for any racers. Feature: For: 4mm / 4.8mm / 5mm / 6mm Ball End Material: Aluminum Color: Black

Yeah Racing's instrument for making accurate measurements on parts of your car where the utmost amount of accuracy is required. Features a stainless steel construction and a unique sliding rail design which minimizes the amount of error during measurements due to next to none play in these calipers. A screw type adjusting nut allows for locking in measurements for left and...

Setup your 1/28 Racer with ease with this Tool Set! Comes with all the tools you would see used to setup 1/10 Touring Cars, comes with enough tools for you to setup the Droop, Rideheight and Camber. TAKE CARE: It's made for Mini-Z. Mini-Z ist 1/28 scale.

Open body mount holes with ease with this steel tip body reamer with an aluminum handle whilst giving you a good grip and keeping the weight down whilst carrying it around. Open holes up to 14mm big with this reamer!

Ca. 215mm total length.

Ca. 215mm total length.

Black golden Design. Spare tips can be used from HUDY or Arrowmax as well.

Black golden Design. Spare tips can be used from HUDY or Arrowmax as well.

Black golden Design. Spare tips can be used from HUDY or Arrowmax as well.

Black golden Design. Spare tips can be used from HUDY or Arrowmax as well.

Portable soldering iron for lighter packing for either going to the track or heading off to the trails for crawling! Plug into either your 12v supply or 3s pack to power up to temperature in no time! Comes with a chisel tip for efficient heat transfer to soldering either motor or battery leads! Comes with two different plugs for you to DIY the power lead to a suitable length...

Black golden Design.

Black golden Design.

Black golden Design.

All the tools you would ever need at a track day whilst either racing 1/10 touring cars or drifting! Even comes with Lipo bags for when you charge lipo batteries and a body opener for when you want to mount a new body. Feature: For: Car maintenance Include: YT-0187(1 pc) include -1.5mm Hex Wrench (1 pc) -2.0mm Hex Wrench (1 pc) -2.5mm Hex Wrench (1 pc) -3.0mm Hex Wrench (1...

Drill bits for installing into a handheld drill or a dremel for use to either modify shock pistons or places where small holes are needed! Color coded with corresponding sizes for easy management. Comes with 10pcs, increasing in 0.1mm increments ranging from 1.1 to 2mm. Feature: For: 4mm / 4.8mm / 5mm / 6mm Ball End Material: Aluminum Color: Black

Body Post Trimmer - Multitool Never have rough looking cut body posts again with this body post cutter! Loosen the knob at the end and make sure the little ball is backed off as well then insert your knife and start tightening the knob! In no time you will have very clean cut body posts on your car! The fun doesn't end there, there's also a bevel cut function which makes...

Multi sized hex driver containing 4 hex tips from 1.5mm to 3.0mm in 0.5mm increments. The hex tips are stored inside the handle cap, for easy tip management and storage so that there is a less chance for losing them. Magnetised tips for easy screw pickup. The bits are having the same size (6.35mm) as most of such bits are having.

Toolset including all the tools that you would require to rebuild your entire car! Comes in a neat carrying pouch for you to bring to the track easily and prevent your tools from getting scratched or scratching other things! 3.5mm Nut driver (1 pc) 4mm Nut driver (1 pc) 4.5mm Nut driver (1 pc) #00 Philips screwdriver (1 pc) #0 Philips screwdriver (1 pc) #1 Philips...

Black golden Design. Spare tips can be used from HUDY or Arrowmax as well.

Neatly sort your pit space with this tool stand with three separate compartments to store small parts such as screws and bodyclips! 12.5x9x1.8cm 190g weight Hole diameter: 18.2mm - 10 pcs

Neatly sort your pit space with this tool stand with three separate compartments to store small parts such as screws and bodyclips! 12.5x9x1.8cm 190g weight Hole diameter: 18.2mm - 10 pcs Including 10 tools with alu handle!