Vintage Racing Tire 26mm D-Compound

Tire Additive - very special! - offers a bit less grip than PH47, but is much cheaper - indoor and outdoor use possible - for foam and rubber tires The bottle has an integrated application sponge.

Tire Additive - very special! - all new special developed and tested formula - one additive for all conditions - highest traction possible with lowest chance of traction roll The bottle has an integrated application sponge.

We are proud to show you our new PHUB Hyper Grip for Large Scale Touring Cars to improve grip and tyre life! The Hyper grip comes in a handy 100mL black bottle with a stunning finish for maximum performance. Apply it on the tyres before warming them and improve your lap times and consistency. Apply 5min before warming the tyres for 30min, then you are all set to go! The...

Our well-proven #PHUB additive bottle in its nice black finish which can hold a content of up to 60mL. The bottle comes with a black top and a foam applier to seal the content inside the bottle. EMPTY!

We are proud to show you our very first tyre additive for Slot Car Racing, the PHUB Slot Gripper - Red. The Slot Gripper is made with a specially developed formula for foam and rubber tyres for Slot Car Racing, and is providing better traction and grip as well as freshing up the tyres. The Slot Gripper - Red comes in our well-proven bottle with a foam applier on top. The...

The Power Grip is the perfect additive for you no matter what carpet track you're going to! This all-new mixture will provide you unlimited Power to your tyres, all the time, and is very easy to drive and handle. The Power Grip comes in the well-known PHUB additive bottle with a 60mL content and a foam top for your comfort! It will be a must have in any RC bag around the...

Our new Yellow X Carpet Grip is ready for you to put on your tyres and improve your lap times even more! This Yellow formula has been developed and tested by some of the best drivers and delivers improved grip and consistency during your run. Made for carpet, and is providing grip in the area between our Blue and White mixtures. The bottle has an integrated application sponge.

The #PHUB Hybrid Grip is the first additive from PHUB made specially for asphalt tracks. It’s made from a blend of thin/light additives and oily/heavier additives. This unique blend ensures perfect traction and steering, and Will help any driver to go faster! It’s important to notice that by using the Hybrid Grip, the additive works better in higher temperatures. It Will of...

Introducing our new Carpet gripper for 1:10 TC and 1:12: Fusion Grip. The Fusion Grip has been developed with the purpose of high grip level tracks where the Magic Grip is simply too much and the car needs a bit more of a “free feeling”, but without compromising corner speed. The formula is our most advanced yet, and we hope that you will like the new born boy to fit in your...

ALU NUT FOR 1/8 OFF-ROD SYSTEM (4)

ALLEN WRENCH + BALL REPL.TIP 5.0 x 120 MM

1/10 mini car with front wheel drive. 160mm width 210mm wheelbase Will be offered as pre-build car kit. You need to finish some small steps. Tires and rims are included. Electronics and the body are NOT included.

1/10 mini car with front wheel drive. 160mm width 225mm wheelbase Will be offered as pre-build car kit. You need to finish some small steps. Tires and rims are included. Electronics and the body are NOT included.

1/10 touring car with front wheel drive. 190mm width 257mm wheelbase Will be offered as pre-build car kit. You need to finish some small steps. Tires and rims are included. Electronics and the body are NOT included.

ABC Hobby bodies are made of a great quality. So many details! Scale: 1:10 (Mini!) Wheelbase: ca. 210mm Width: ca. 160mm The bodyset will be delivered clear (unpainted). Decal sheet and window masks are included. Neither the body nor the decals are pre-cut. Please check the picture of delivery content to know what's included. NOT a complete car. Only the body. TAKE CARE:...

ABC Hobby bodies are made of a great quality. So many details! Scale: 1:10 Wheelbase: ca. 257mm Width: ca. 190mm The bodyset will be delivered clear (unpainted). Decal sheet and window masks are included. Neither the body nor the decals are pre-cut. Please check the picture of delivery content to know what's included. NOT a complete car. Only the body.

ABC Hobby bodies are made of a great quality. So many details! Scale: 1:10 Wheelbase: ca. 257mm Width: ca. 190mm The bodyset will be delivered clear (unpainted). Decal sheet and window masks are included. Neither the body nor the decals are pre-cut. Please check the picture of delivery content to know what's included. NOT a complete car. Only the body.

ABC Hobby bodies are made of a great quality. So many details! Scale: 1:10 Wheelbase: ca. 257mm Width: ca. 190mm The bodyset will be delivered clear (unpainted). Decal sheet and window masks are included. Neither the body nor the decals are pre-cut. Please check the picture of delivery content to know what's included. NOT a complete car. Only the body.

ABC Hobby bodies are made of a great quality. So many details! Scale: 1:10 Wheelbase: ca. 257mm Width: ca. 190mm The bodyset will be delivered clear (unpainted). Decal sheet and window masks are included. Neither the body nor the decals are pre-cut. Please check the picture of delivery content to know what's included. NOT a complete car. Only the body.

ABC Hobby bodies are made of a great quality. So many details! Scale: 1:10 (Mini!) Wheelbase: ca. 210mm Width: ca. 160mm The bodyset will be delivered clear (unpainted). Decal sheet and window masks are included. Neither the body nor the decals are pre-cut. NOT a complete car. Only the body.

ABC Hobby bodies are made of a great quality. So many details! Scale: 1:10 (Mini!) Wheelbase: ca. 225mm Width: ca. 162mm The bodyset will be delivered clear (unpainted). Decal sheet and window masks are included. Neither the body nor the decals are pre-cut. NOT a complete car. Only the body. The shown design is a painting example.

ABC Hobby bodies are made of a great quality. So many details! Scale: 1:10 Wheelbase: ca. 257mm Width: ca. 190mm The bodyset will be delivered clear (unpainted). Decal sheet and window masks are included. Neither the body nor the decals are pre-cut. Please check the picture of delivery content to know what's included. NOT a complete car. Only the body.

ABC Hobby bodies are made of a great quality. So many details! Scale: 1:10 (Mini!) Wheelbase: ca. 210mm Width: ca. 160mm The bodyset will be delivered clear (unpainted). Decal sheet and window masks are included. Neither the body nor the decals are pre-cut. NOT a complete car. Only the body.

Masking Tape

Line Tape

Line Tape

Masking Tape

Masking Tape

Masking Tape

ABC Hobby bodies are made of a great quality. So many details! Scale: 1:10 Wheelbase: ca. 257mm Width: ca. 200mm front / 202mm rear The bodyset will be delivered clear (unpainted). Decal sheet and window masks are included. Neither the body nor the decals are pre-cut. Please check the picture of delivery content to know what's included. NOT a complete car. Only the body.

Needs to be used with a Windows 7 or Windows 10 OS.

4.8-8.4V operating voltage 0.052sec / 60° @ 8.4V 3kg-cm @ 8.4V 20x17.8x8mm 7g

4.8-8.4V operating voltage 0.073sec / 60° @ 8.4V 19kg-cm @ 8.4V 40.8x20.2x26.5mm 50g 25T gear metal gear ball bearings low profile style

4.8-8.4V operating voltage 0.070sec / 60° @ 8.4V 20kg-cm @ 8.4V 40.8x20.2x26.5mm 57g 25T gear metal gear ball bearings brushless motor full metal case low profile style

Needs to be used with a Windows 7 or Windows 10 OS.

4.8-8.4V operating voltage 0.18sec / 60° @ 7.4V 14kg-cm @ 7.4V 40.8x20.2x29.0mm 44g 25T gear metal gear ball bearings low profile style

4.8-8.4V operating voltage 0.065sec / 60° @ 8.4V 18kg-cm @ 8.4V 40.8x20.2x26.5mm 48g 25T gear metal gear ball bearings brushless motor center part metal case low profile style

4.8-8.4V operating voltage 0.11sec / 60° @ 8.4V 18kg-cm @ 8.4V 40.8x20.2x26.5mm 51g 25T gear metal gear ball bearings low profile style

4.8-8.4V operating voltage 0.068sec / 60° @ 8.4V 33kg-cm @ 8.4V 40.8x20.2x29.5mm 66g 25T gear metal gear ball bearings brushless motor full metal case low profile style

AMB MyLaps RC4 Hybrid Transponder What's the difference between "RC4" and "RC4 Hybrid"? The Hybrid transponder will work with RC4 and RC3 decoder. Most of the tracks in the world are using a RC4 decoder (summer 2017). But there are still same small tracks which are using the very old RC3 system. RC4 is cheaper than RC4 Hybrid - but please check if you can use it.

AMB MyLaps RC4 Pro Transponder What's the difference between "RC4" / "RC4 Pro" and "RC4 Hybrid"? The Hybrid transponder will work with RC4 and RC3 decoder. The new "RC4 Pro" transponder is smaller (-25%), lighter, black coloured and has a short wire (70mm). The signal is still the same like RC4.

AMB MyLaps RC4 Transponder What's the difference between "RC4" and "RC4 Hybrid"? The Hybrid transponder will work with RC4 and RC3 decoder. Most of the tracks in the world are using a RC4 decoder (summer 2017). But there are still same small tracks which are using the very old RC3 system. RC4 is cheaper than RC4 Hybrid - but please check if you can use it.

Introducing the R12FF, ARC`s next-generation 1/10th scale FWD touring car kit. Based on the 2020 ETS FWD winning R11F, the R12FF retains its front-motor, front-wheel-drive layout for maximum traction under all track conditions. The R12FF features all-new long suspension arms to further improve traction and deliver more corner speed. Other new features include: - Motor...

TAKE CARE: Even if the pictures are showing the graphite version you will get the car kit with an ALU LOWER DECK instead of the graphite one. Introducing the R12FF, ARC`s next-generation 1/10th scale FWD touring car kit. Based on the 2020 ETS FWD winning R11F, the R12FF retains its front-motor, front-wheel-drive layout for maximum traction under all track conditions. The...

What is NEW? New onepiece upper deck. All New X-Low Shocks - 7mm shorter than the Ultra Short Shocks! New front and rear shock tower for the new shocks. New low-profile anti-rollbar - placed below the drive axle. New 5.8mm pivot ball for more tuning options. Aramid belts now included in the kit. New 17mm X-Low Springs. Full carbon low arms front and rear. New rear horizontal...

What is NEW? New onepiece upper deck. All New X-Low Shocks - 7mm shorter than the Ultra Short Shocks! New front and rear shock tower for the new shocks. New low-profile anti-rollbar - placed below the drive axle. New 5.8mm pivot ball for more tuning options. Aramid belts now included in the kit. New 17mm X-Low Springs. Full carbon low arms front and rear. New rear horizontal...

The A10MF-24 is the latest FWD kit by ARC! The transmission parts are placed as low as possible, creating a super low center of gravity to improve handling, especially on high traction indoor carpet tracks. A total of 145g brass weights is included in the kit, with 60g placed directly behind the front bumper. Following that are two 30g weights, mounted in front of the front...

What is NEW? New Carbon Chassis in 2.25mm. New lower bulkheads with pins for easier installation. New and longer lower suspension arms. New motor bulkhead with bearing below the spur gear. New upper suspension arms that can be mounted in three different positions to change caster and camber. New suspension due to new shock towers. New steering arms made from alloy with new...

What is NEW? New Alu chassis. New lower bulkheads with pins for easier installation. New and longer lower suspension arms. New motor bulkhead with bearing below the spur gear. New upper suspension arms that can be mounted in three different positions to change caster and camber. New suspension due to new shock towers. New steering arms made from alloy with new offset. New...

Based on the successful R8S On-Road Pan Car platform, the R8S-21 incorporates a number of refinements and option parts for even greater performance out of the box. The main chassis has been redesigned for the R8S-21 with the slots removed to improve chassis rigidity and handling. The original chassis linkage bars have been replacd with 2.0mm chassis flex plates for increased...

R8.4 - 1:8 Onroad Nitro Car Kit - NEW Chassis with stiffer mid-section - NEW Lower suspension arms, thinner and reinforced - NEW middle belt tensioner - Adjustable front shock base now standard in the kit, not optional - NEW front and rear bulkhead - NEW Anti-Roll Bar Stopper - NEW Main Shaft Bulkheads - NEW Bushing for Main Shaft Ball Bearing - Optional adjustable rear...

ARC transformed the R8.4 in two different electric versions. R800021: R8.4EL - made for standard and shorty LiPos R800022: R8.4Es - made specifically for shorty LiPos Sold as car kit. Without engine, any electronics, wheels or a body.

What's the difference between R8.4 and R8.4 LCG? - LCG stands forLow Center Gravity Design. - The engines position is lowered by 2mm with a new chassis for the LCG. - The new chassis also increases the flexibility at the rear and the steering. - The front steering arms and suspension arms are included in the hard compound variant. - The upper suspension arms are higher...

Over the years, AXON has made an absolute TOP NAME for accessories and tuning parts. Based on various Yokomo car kits, AXON has already tried to get involved in the vehicle manufacturer sector. With the TC10/3, for the first time there is no conversion kit but a complete touring car from Japan! The car has all the technical features that you would expect from a touring car...

Anti scratch Battery Rubber Sheet Measurements: 30x135x0.1mm

Precut stickers.

Body Repair Tape

Wear what you drive!

Wear what you drive!