REAR BODY MOUNT SET 6MM

COMPOSITE BALL JOINT 4.9MM - CLOSED WITH HOLE (4 pieces)

T4 2014 - Alu Shims (3x6x0.5mm) - black

T4 2014 - Alu Shims (3x6x0.5mm) Will be delivered BULK.

XRAY T2 Alu Scheiben - 3x6x2.0mm (10 Stück)

Alu Shim 3 x 6 x 3.0mm (10 pieces)

COMPOSITE SET OF SHIMS 3x 3x6x1MM; 1x 3x6x2MM (2)

ALU 4.9MM BALL END - BLACK (2)

BALL JOINT 4.9MM - OPEN (4)

COMPOSITE GEAR DIFF BEVEL & SATELLITE GEARS (2+4)

XB4 2016 - Graphite Gear Diff Gears - LOW (2+4) Replacement for 304931

COMPOSITE GEAR DIFF CROSS PIN

DIFF GASKET (4)

ANTENNA MOUNT - THIN

Antenna

BODY CLIP FOR 6MM BODY POST (4 pieces)

Composite Suspension Arm Front Lower Medium

Adjustable Turnbuckle 75mm M3 L/R HUDY Spring Steel (2 pieces)

Super-compact rear upright made from specially-formulated composite material features multiple set-up options for upper & lower roll centers. Upper roll center is adjusted with the camber linkage via shims in all directions – up/down & in/out. Lower roll center is adjustable via eccentric inserts in 9 different positions – up/down & in/out. The race-proven, 2-piece design...

Alu Rear Hub Plate for Multi Adjustable Upright 1-H - Alu 7075 T6

Rear Drive Shaft 94mm with 2.5mm Pin HUDY Spring Steel

Rear Drive Shaft 92mm with 2.5mm Pin HUDY Spring Steel

Front Drive Shaft 99mm with 2.5mm Pin HUDY Spring Steel

Spare part for 320901

XB2 Pivot Pin front (2 pieces)

Pivot Pin Rear (2 pieces)

Rim - white - 12mm hex ca. 50mm width ca. 56mm diameter will fit in front and rear position

Rim - white - 12mm hex ca. 50mm width ca. 56mm diameter will fit in front and rear position

XB4 ALU SERVO SAVER ADJUSTABLE NUT

SERVO SAVER SPRING C=14

Adj. Turnbuckle M3 L/R 45mm - Hudy Spring Steel™ (2)

Brake/Throttle Arms & Steering Servo Arms - Set

Clutch Bell Ball-Bearing MR105ZZ 5x10x4 (2)

XB4 2018 - Alu Lower Deck - BLACK

Graphite Front Upper Steering Deck 2.0mm

Graphite Center Upper Deck 2.0mm

XB4 2016 - Tuning rear graphite upper deck - 2.0mm

Composite Rear Lower Brace

Graphite Rear Upper Deck / Brace 2.0mm

Composite Front Bumper

Composite Chassis Side Guards L+R - hard

Composite Chassis Brace Front - hard

Composite Chassis Brace Rear - hard

Graphite Chassis Wire Cover - 2.0mm

BODY MOUNT, BATTERY MOUNT & WING SHIM (2)

Diff Bulkhead Block Set Front With small modification to the front upper deck or to the 362002 you can use the 362002 as the replacement of 362000 Diff Bulkhead Block Set Front - V2. The modification will require only to cut away a little bit of material on either part to make them to fit together.

Diff Bulkhead Block Set Rear

Graphite Shock Tower Front 3.5mm

COMPOSITE C-HUB 9° DEG. RIGHT - Hard

COMPOSITE C-HUB 9° DEG. LEFT - Hard

COMPOSITE STEERING BLOCK

ALU CONICAL SHIM 3x6x2.0MM (10)

STEEL STEERING BUSHING - SHORT (2)

STEEL STEERING BUSHING - LONG (2)

ALU FRONT LOWER SUSP. HOLDER - FRONT - 7075 T6 (5MM)

ECCENTRIC BUSHING SET (2)

ALU FRONT LOWER SUSP. HOLDER - REAR - 7075 T6 (5MM)

ANTI-ROLL BAR 1.8 MM

COMPOSITE SERVO SAVER

ALU SERVO SAVER MAIN SHAFT