Option parts by Torpine for ARC A10.

Option parts by Torpine for ARC A10.

Option parts by Torpine for ARC A10.

Option parts by Torpine for ARC A10.

Option parts by Torpine for ARC A10 and XRAY XLP shocks.

The different geometry of the topdeck offers the ability to de- and montage the topdeck easier - it also provides a more sustainable flex in the car front to back.

Replaces the upper carbon plate and brings additional 20g to the front.

Option parts from Torpine for your ARC R11F.

Compared to the original this topdeck is softer but similar in the geometry. The car drives with more precision and is easier to handle due to the different flex.

The bumper puts the center of gravity way down and offers on top a smooth driving and higher corner speed.

Both mounts each weigh about 6g.

The mount weighs about 8g.

If you use this plate you can adjust the flex of your ARC R12 easily through various ways of attaching the plate to the chassis. Test have shown, that if you attach the plate with the front screw (in the motor mount) and the third screw, the rear will gain more grip and the car is easier to handle. If you'll need even more traction, you can attach the plate through the rear...

The two-part topdeck offers the ability to adjust the flex. If you mount the front part only with a screw behind the motor, the cars flex will move more towards the front of the car.

Rear Body Stiffener

The two-part topdeck offers the ability to adjust the flex. If you mount the front part only with a screw behind the motor, the cars flex will move more towards the front of the car.

5 pieces 3x5mm 29 pieces 3x6mm 6 pieces 3x8mm 14 pieces 3x10mm

28 pieces 3x5mm 12 pieces 3x6mm 9 pieces 3x8mm 10 pieces 3x10mm

31 pieces 3x6mm 5 pieces 3x10mm ​8 pieces 3x12mm

17 pieces 3x5mm 23 pieces 3x6mm 4 pieces 3x8mm 6 pieces 3x10mm 5 pieces 3x12mm

24 pieces 3x5mm 20 pieces 3x6mm 3 pieces 3x8mm 4 pieces 3x10mm

14 pieces 3x5mm 27 pieces 3x6mm 5 pieces 3x8mm 6 pieces 3x10mm

6 pieces 3x5mm 16 pieces 3x6mm 12 pieces 3x8mm 5 pieces 3x10mm

One piece topdeck

The tool comes in two different ways - for closed or open balljoints. The tool will be placed over the balljoint for better grip. The ideal fitting of the balljoint prevents any damages, which can occur with using pliers.

The tool comes in two different ways - for closed or open balljoints. The tool will be placed over the balljoint for better grip. The ideal fitting of the balljoint prevents any damages, which can occur with using pliers.

Option parts from Torpine for your XRAY T4'20.

Option parts from Torpine for your XRAY T4'20.