Charging batteries is usually a primitive, boring and mundane activity, and it still is. What matters during the charging process, especially for AA/AAA NiMH battery charging? No doubt, accuracy and safety! The creation of NC1500 not only arises out of the need but also from the desire to have a simple but safe and accurate charger for the battery. NC1500 has four...

The NC2200 charger is a compact charger for up to 4 rechargeable NiMH / NiCd batteries in sizes AA or AAA. With four independent slots, the batteries can be charged differently depending on their capacity. And to further increase comfort, the VA display shows the most important data such as the charging current, the battery capacity as well as the internal resistance, the...

Features Simply plug in and charge optimally Built-in circuit for delta peak detection Suitable for 4-8 NiMH cells Connect directly to the socket with a voltage range of 100V to 240V Various protective mechanisms (reverse polarity protection, short circuit protection, low operating temperature) Loading status display: Red (steady): standby Red (flashing): error Green...

Features Simply plug in and charge optimally Built-in circuit for delta peak detection Suitable for 4-8 NiMH cells Connect directly to the socket with a voltage range of 100V to 240V Various protective mechanisms (reverse polarity protection, short circuit protection, low operating temperature) Loading status display: Red (steady): standby Red (flashing): error Green...

The SkyRC T400Q offers user-friendly charging and discharging of the most common battery types (LiPo, LiFe, LiIon, LiHV, NiMH, NiCd, Pb) in its usual simple, slim tower design. This AC/DC device manages a full 100W at 12A on all of its four independent outputs, making it a total of 400W. In contrast to other devices in the SkyRC T-series, the T400Q has optimized software...

SKYRC D400 is a twin-channel charger with two independent circuits which can charge two different kinds of batteries simultaneously. It also supports power distribution in AC mode to get max charging power to shorten charging time. The total power for Channel 1 and Channel 2 is 400W. For example, you can set channel 1 as 300W, the channel 2 will be 100W. Your Ultimate Duo...

Powerful, Tiny, Smart, that is it! Under this slogan the new B6 nano is designed. Easy to read, high contrast display with all important parameters for charging/discharging process. The B6 Nano is intuitively controlled with 3 capacitive touch buttons. Internal Bluetooth module confers B6 Nano on its ability to be controlled by APP. This product is suitable for charging and...

Features: Compact design Excellent performance High contrast display Easy operation with 3 capacitive touch buttons XT-60 connector in/out XH balancer connector Suitable for LiPo/LiHV/Lilon/LiFe/NiCd/NiMH/Pb Technical Specifications: Input Voltage DC: 7V - 32V Max Charge Power: 220W Max Discharge Power: 5W Charge Current Range: 0.1A - 13.0A Discharge Current Range: 0.1A -...

SkyRC S65 is a powerful charger with battery management, suitable for use with all common battery types such as LiPo, LiHV, Lilon, LiFe, NiCd, NiMH, PB and AGM. The SkyRC S65 charger provides a remarkable 65Watt charging power in a compact housing design. At the front there is a built-in XT60 plug to which you can simply connect your battery or charging cable and avoid the...

The SkyRC T200 is a universal AC/DC multi-function charger/discharger that can be used with the most popular battery types, such as LiPo/LiHV/Lilon/LiFe/NiCd/NiMH/Pb. With 100 Watt charging power per charging channel the T200 charger provides more than sufficient charging power for most applications. The SkyRC T200 offers all the usual charge and discharge modes such as:...

Features: 2 independendt channels 2x 50W charging power, maximum 5.0A improved display incl. battery icon and procentage 3 decimal places for voltage 10 profiles safeable AGM and Pb Cold Charge Modus easy use and menu XT-60 plug as charging output many safety surveillances Technical data: Input Voltage AC: 100V - 240V Charging power: 2x 50W Charging voltage: 0.1A - 5.0A...

Features: 2 independent charging channels Up to 450W (AC) or 1000W (DC) charging power Smart power distribution High-contrast 2.8'' LCD display with ColorX user interface Intelligent fan control 20A per port for charging, 40A for discharging 35A parallel charging PD power charging hub Available languages: German, English, Japanese and Chinese Various security measurements...

Technical specification: Input Voltage: DC: 12V/3A Compatible Batteries: NiMH / NiCd (AA/AAA) Charging Current: 0.1-2.5A Discharging Current: 0.1-1.5A Cutoff Voltage (Discharge): 0.8-1.0V (adjustable) USB-Output: QC3.0, 5V/3A, 9V/2A, max. 18W -Delta V: 1-8mV (adjustable) Trickle Current: 30-99mA/OFF Over Heating Protection: 55-65°C / 131-149°F (adjustable) Weight: 600g...

Features: 200W AC charging power 800W DC charging power Control via scroll wheel button Lightweight and compact With PD/QC3.0 fast charge Compatible with SkyCharger App and Charger Master Technical Specifications: Input Voltage AC: 100-240V Input Voltage DC: 10-30V Charge Power: max. 200W (AC); max. 400Wx2 (DC) Discharge Power: 2x 10W external Discharge Power: max. 350W...

Features: NFC charging option included (BumpGO) 200W AC charging power 800W DC charging power Control via scroll wheel button Lightweight and compact With PD/QC3.0 fast charge Compatible with SkyCharger App and Charger Master Technical Specifications: Input Voltage AC: 100-240V Input Voltage DC: 10-30V Charge Power: max. 200W (AC); max. 400Wx2 (DC) Discharge Power: 2x 10W...

Features: 200W DC charging power 24W discharge power Pocket format Up to 3x faster loading times than the B6V2 Very quiet at around 48dB Compatible with SkyCharger App and Charger Master Technical Specifications: Input Voltage DC: 10-28V Input Voltage PD: 12-20V Charge Power: DC: 200W / PD: max. 80Q (20V, 5A) Discharge Power: max. 24W (6S, 4.2V/S) Charge Current: 0.1-10.0A...

Features: 200W DC charging power 60W AC charging power 19W discharge power Pocket format Compatible with SkyCharger App and Charger Master Technical Specifications: Input Voltage DC: 10-30V Input Voltage AC: 100-240V Charge Power: DC: 200W / AC: 60W Discharge Power: max. 19W (6S, 4.2V/S) Charge Current: 0.2-10.0A Discharge Current: 0.1-2.0A Balance current: max. 500mA Cells...

Power Supply "eFuel" 30A 12 - 18 Volt - adjustable - LCD Screen Features: Two DC power outputs, up to 30 amperes Output voltage adjustable 12-18V Large LCD indicates voltage and current amperes output Two USB ports, 5 volts, 1000mA total for MP3 player, mobile phone and digital cameras Smart cooling fan Over temperature protection Over loading protection Short circuit...

Technical data: Measurements: 305x170x85mm Weight: 3.08kg Input: 100-240V AC Output: 15-30V DC + 0.5V Power: 50A + 1A Overload protection: =51A 500MS Safeguard: 20A Safety Catch LCD Display Voltage Accuracy: + 0.3V Power Accuracy: + 0.5A Power Efficiency: 89% Power Factor: > 0.98 Overheat factor: Cooling method: Fan Working temperature: 0-40°C

Use the really small eFuel 200W to transform the standard household power into efficient and powerful DC power up to 12V and 17A. A device constructed by highly skilled professionals and equipped with several security measurements. For example, this power supply is equipped with short-circuit protection and overvoltage protection. Thanks to the XT60 connection, it prevents...

ESC "Toro" TS50 - 1/10 Characteristics: Electronic Power Switch: A simple push button operates the switch meaning to eliminate the problems associated with intermittent contact of an ordinary mechanical switch. Performance: Less Resistance, Less Heat, More Effective 10 User Modifiable Profiles: The users could set and store 10 sets of profiles in the ESC. These data could be...

ESC "Toro" TS50 - 1/10 Characteristics: Electronic Power Switch: A simple push button operates the switch meaning to eliminate the problems associated with intermittent contact of an ordinary mechanical switch. Performance: Less Resistance, Less Heat, More Effective 10 User Modifiable Profiles: The users could set and store 10 sets of profiles in the ESC. These data could be...

ESC "Toro" TS50 - 1/10 Characteristics: Electronic Power Switch: A simple push button operates the switch meaning to eliminate the problems associated with intermittent contact of an ordinary mechanical switch. Performance: Less Resistance, Less Heat, More Effective 10 User Modifiable Profiles: The users could set and store 10 sets of profiles in the ESC. These data could be...

ESC "Toro" TS120A - for 1/10 2-3s LiPo - Black - Alu Drive Type Brushless Scale 1/8|1/10 Cells max. 3S / 9 NiMH Voltage max. 11,1V Capacity max. 120A Shape Sensorlos|Sensored Dimensions 39mm x 31mm x 19mm (L x W x H) Weight 45g Included 1 Stk. Suitable to NiMH|LiPo BEC-Voltage 6,0 V / 3A

ESC "Toro" TS160A - for 1/10 2-3s LiPo - 3.5 Turns Limit Features: Compact design for easy location. Aluminum case for better heat dissipation. Turbo Timing When the car is in full throttle, turbo timing set can improve the RPM to get its best performance. Well-performed Throttle and Brake Control Function: Users could set the punch/brake control rate by point or customize...

ESC "Toro" TS160A - for 1/10 2-3s LiPo - 4.5 Turns Limit Features: Real-time monitoring and programming via smartphone Includes boost and turbo timing Well-tuned throttle and brake functions Compact and extremely lightweight Built-in electronic switch and power capacitor Low heat generation and improved efficiency Safety features: Low voltage protection High voltage...

ARES Pro 1/10 Brushless Sensor Engine - 4.5T - 7620KV Drive Type Brushless Scale 1/10 Technology 2 Pole Cells max. 2S Shape Sensored Weight 178g Included 1 Stk. Performance 7.620 kv Power 490W Rated Current 108A Turns 4,5T Shaft 3,175mm

ARES Pro V2 1/10 Brushless Sensor Engine - 4.5T - 7620KV Drive Type Brushless Scale 1/10 Technology 2 Pole Cells max. 2S Shape Sensored Weight 178g Included 1 Stk. Performance 7.620 kv Power 490W Rated Current 108A Turns 4,5T Shaft 3,175mm

ARES Pro V2.1 1/10 Brushless Sensor Engine - 6.5T - 5350KV Drive Type Brushless Scale 1/10 Technology 2 Pole Cells max. 2S Shape Sensored Weight 178g Included 1 Stk. Performance 5.350 kv Power 490W Rated Current 108A Turns 6,5T Shaft 3,175mm

ARES Pro V2.1 1/10 Brushless Sensor Engine - 17.5T - 2200KV Drive Type Brushless Scale 1/10 Technology 2 Pole Cells max. 2S Shape Sensored Weight 178g Included 1 Stk. Performance 2.200 kv Power 490W Rated Current 108A Turns 17,5T Shaft 3,175mm

ARES Pro V2.1 1/10 Brushless Sensor Engine - 21.5T - 1760KV Drive Type Brushless Scale 1/10 Technology 2 Pole Cells max. 2S Shape Sensored Weight 178g Included 1 Stk. Performance 1.760 kv Power 490W Rated Current 108A Turns 21,5T Shaft 3,175mm

ARES Pro V2.1 1/10 Brushless Sensor Engine - 4.5T - 7620KV Drive Type Brushless Scale 1/10 Technology 2 Pole Cells max. 2S Shape Sensored Weight 178g Included 1 Stk. Performance 7.620 kv Power 490W Rated Current 108A Turns 4,5T Shaft 3,175mm

ARES Pro V2.1 1/10 Brushless Sensor Engine - 7.5T - 4700KV Drive Type Brushless Scale 1/10 Technology 2 Pole Cells max. 2S Shape Sensored Weight 178g Included 1 Stk. Performance 4.700 kv Power 490W Rated Current 108A Turns 7,5T Shaft 3,175mm

ARES Pro V2.1 1/10 Brushless Sensor Engine - 8.5T - 4100KV Drive Type Brushless Scale 1/10 Technology 2 Pole Cells max. 2S Shape Sensored Weight 178g Included 1 Stk. Performance 4.100 kv Power 490W Rated Current 108A Turns 8,5T Shaft 3,175mm

ARES Pro V2.1 1/10 Brushless Sensor Engine - 9.5T - 3700KV Drive Type Brushless Scale 1/10 Technology 2 Pole Cells max. 2S Shape Sensored Weight 178g Included 1 Stk. Performance 3.700 kv Power 490W Rated Current 108A Turns 9,5T Shaft 3,175mm

ARES Pro V2.1 1/10 Brushless Sensor Engine - 10.5T - 3450KV Drive Type Brushless Scale 1/10 Technology 2 Pole Cells max. 2S Shape Sensored Weight 178g Included 1 Stk. Performance 3.450 kv Power 490W Rated Current 108A Turns 10,5T Shaft 3,175mm

ARES Pro V2.1 1/10 Brushless Sensor Engine - 11.5T - 3450KV Drive Type Brushless Scale 1/10 Technology 2 Pole Cells max. 2S Shape Sensored Weight 178g Included 1 Stk. Performance 3.200 kv Power 490W Rated Current 108A Turns 11,5T Shaft 3,175mm

ARES Pro V2.1 1/10 Brushless Sensor Engine - 13.5T - 2860KV Drive Type Brushless Scale 1/10 Technology 2 Pole Cells max. 2S Shape Sensored Weight 178g Included 1 Stk. Performance 2.860 kv Power 490W Rated Current 108A Turns 13,5T Shaft 3,175mm

Technical Data: KV (RPM/V): 2350 Watts: 2400 Max. Voltage: 19V Max. Current: 126A Internal Resistance: 0,0053 Ohm Max. RPM: 45000 Weight: 376g Shaft Diameter: 5mm Turn: 2Y Rotor: 4 Pole Sensor: YES Length: 74mm

Battery Checker "LipoPal" - for LiPo 2-6s - with LCD Display Functions: There are two functions of this compact device: 1.Battery Checker The LiPoPal can check the voltage of each cell of a lithium battery pack and remaining capacity in percentage %. 2.Self Voltage Balancer This program can equalize the individual voltages to their lowest one. Balance operation automatically...

Brushless Engine Analyzer / Tester Special Feature: There is NO ESC needed for this engine tester! Features: Input Voltage: 7.4 - 8.4V (Suggested to use 7.4V 2S 1P LiPo Battery) LCD Display Screen: Blue Backlight Background, White Text, 16 Characters X 2 Lines KV Value Accuracy +/-3% Motor Timing Accuracy: +/-4% Motor Timing Range: 0-70° Noise Level Measurement Range: 60dB -...

Features 3 different modi for every oportunity (Drag Race, Track Race, Flying Mode) build-in flash memory 1M (up to 50 datasets) build-in rechargable LiPo battery, around 5 hours of capacity recorded data can be analysed with the app GPS-coordinates uses metric or british measuring free App for iOS 9.0 or Android 5.0 and higher Technical data: Receiver: L1, 1575.42 MHZ...

Check your ball or gear diff hardness - for 1/10 touring or offroad cars with 7mm wheel nut. Take care: This tool will not show you a value of your used oil viscosity. It just shows a value which can be compared between two diffs. A higher number means a harder diff. Different devices will show different values - even if the same diff is measured. You need to compare always...

In order to optimally coordinate a car that can be driven in a balanced way in all situations, a computer-controlled weighing system is essential. SKYRC's Bluetooth Corner Weight System can help achieve just that. The system measures the weight on each individual axis on the model. Thus, it pretty much reflects the existing weight distribution of the racing car on each wheel...

Suitable for 1/10 touring cars (or other cars up to 80mm tire diameter). Needs to by used with an Android / iOS app which can be downloaded for free.

Suitable for 1/8 cars (or other cars up to 100mm tire diameter). Needs to by used with an Android / iOS app which can be downloaded for free.

Charging lead. The total lenght is 25cm.

Charging lead. The total length is 25cm.

Power Switch - 4-12V 10Amp - LiPo and NiMh SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model. A simple push button operates the switch meaning to eliminate theproblems associated with intermittent contact of an ordinary mechanical switch.The sealed unit is plastic and can easily be mounted to the transponder mount of your...

Multi Balancer Board - 2-6 Cells - XH, EH, HP/PQ, TP/FP Including the balancer wire to connect the board with the charger.

Tyre Heater Belt for 1:8 GT / Rallygame Will fit to all popular tire heating systems (like Xceed, MuchMore, SkyRC...). Take care: NO heating station included. NO tires included. ONLY ONE pair of belts. Basic station is needed!

Tire Warmer "Racing Star" RSTW with temperature control Special Features Front & Rear temperature can be set independently Temperature of 4 tires is controlled by MCU Removable front & rear tire warmers 8 different beep tones Celsius - Fahrenheit selectable display Four LED indicators Safety timer There are two DC inputs, one is on the leftt side of the Tire Warmer the other...

Technical Data: Diameter: 65mm Inner diameter: 64mm Wirelength: 480mm Weight: 75g Usage: 1/10 touring car suitable for: SkyRC tyre heater Racing Star RSTW (SK600064-04) Take care: NO heating station included. NO tires included. ONLY ONE pair of cups. Basic station is needed!

Tire Warmer "Racing Star" RSTW with temperature control Special Features Front & Rear temperature can be set independently Temperature of 4 tires is controlled by MCU Removable front & rear tire warmers 8 different beep tones Celsius - Fahrenheit selectable display Four LED indicators Safety timer There are two DC inputs, one is on the leftt side of the Tire Warmer the other...

Engine Heater SkyRC engine heater will pre-heat all the critical parts of your nitro engine, giving you a minimal of stress and wear on the engine. It helps relieve the stress on the crank, con-rod, piston and sleeve during warm-up. It also give you a very easy and smooth engine start, with no stress on your starterbox. Fuel consumption is much less, as you do not have to...

GC401-Gyro for RC Cars, It is a device using gyro sensor and software algorithm to adjust steering output, providing you with a more stable and controlled driving experience. The Gyro's heading hold effect manages steering output by automatically keeping the car's tires aligned in the direction you chose. It will also precisely maintain car direction regardless of the amount...

Aluminium Shock Holder - BLUE Technical data: Weight: ca. 240g Alloy blue Diameter Stand: ca. 50mm Diameter holes for shocks: 4x ca. 13mm / 1x ca. 10,4mm

SkyRC 600069-06 - Aluminium Setup Wheels (4) - BLACK

Aluminium Setup Wheels (4) - BLUE

To measure the chassis droop correctly and precise you will need a chassis droop gauge. With this tool you can measure the positive and negative chassis droop as well. The chassis droop is one of the most important setup parameter as this take effect on the chassis rolling as well as on the weight balance during acceleration and braking and in corners. Scope of Supply: 2x...