Flite Spur Gear 48dp 66 Teeth

Flite Spur Gear 48dp 69 Teeth

Flite Spur Gear 48dp 75 Teeth

Flite Spur Gear 48dp 78 Teeth

AE Heavy Duty Servo Horn - 25 Teeth - 7075 - BLACK For Futaba and all other 25 spline servos.

AE Heavy Duty Servo Horn - 25 Teeth - 7075 - BLUE For Futaba and all other 25 spline servos.

AE Heavy Duty Servo Horn - 23 Teeth - 7075 - BLACK For Aitronics/ Sanwa/ KO and all other 23 spline servos.

AE Heavy Duty Servo Horn - 23 Teeth - 7075 - BLUE For Aitronics/ Sanwa/ KO and all other 23 spline servos.

XRAY XB2 Suspension Holder Alloy 7075 Heavy Duty RR We have added rear facing material to the rear hanger for greater durability against cracked hangers and angled the bottom leading edge to reduce dirt build up at the hinge pin.

1/8 XL WING BUTTONS, 22MM (2) BLACK New 1/8 buggy sized wing buttons! Heavy duty polished and anodized alloy wing buttons for bolt on buggy wing mounts. Extra large 22mm diameter and thicker than 1/10 buttons to securely hold your wing while offering protection from crashes. Requires the use of 3mm countersunk screws, not included.

1/8 XL WING BUTTONS, 22MM (2) GUN METAL New 1/8 buggy sized wing buttons! Heavy duty polished and anodized alloy wing buttons for bolt on buggy wing mounts. Extra large 22mm diameter and thicker than 1/10 buttons to securely hold your wing while offering protection from crashes. Requires the use of 3mm countersunk screws, not included.

1/8 XL WING BUTTONS, 22MM (2) ORANGE New 1/8 buggy sized wing buttons! Heavy duty polished and anodized alloy wing buttons for bolt on buggy wing mounts. Extra large 22mm diameter and thicker than 1/10 buttons to securely hold your wing while offering protection from crashes. Requires the use of 3mm countersunk screws, not included.

1/8 XL WING BUTTONS, 22MM (2) RED New 1/8 buggy sized wing buttons! Heavy duty polished and anodized alloy wing buttons for bolt on buggy wing mounts. Extra large 22mm diameter and thicker than 1/10 buttons to securely hold your wing while offering protection from crashes. Requires the use of 3mm countersunk screws, not included.

1/8 XL WING BUTTONS, TITANIUM (2) New 1/8 buggy sized genuine titanium wing buttons! Heavy duty polished and laser etched wing buttons for bolt on buggy wing mounts. Extra large 22mm diameter and thicker than 1/10 buttons to securely hold your wing while offering protection from crashes. Requires the use of 3mm countersunk screws, not included.

FLITE WING BUTTONS, TITANIUM (2) New 1/10 buggy sized genuine titanium wing buttons! Heavy duty polished and laser etched wing buttons for bolt on buggy wing mounts. Large 16mm diameter to securely hold your wing while offering protection from crashes. Requires the use of 3mm countersunk screws, not included.

FLITE WING BUTTONS, 16MM (2 pieces) BLACK Heavy duty polished and anodized alloy wing buttons for bolt on buggy wing and touring cars. Large 16mm diameter to securely hold your wing while offering protection from crashes. Requires the use of 3mm countersunk screws, not included. The last picture shows the buttons in build condition (blue). We'll deliver only the buttons...

FLITE WING BUTTONS, 16MM (2 pieces) BLUE Heavy duty polished and anodized alloy wing buttons for bolt on buggy wing and touring cars. Large 16mm diameter to securely hold your wing while offering protection from crashes. Requires the use of 3mm countersunk screws, not included. The last picture shows the buttons in build condition (blue). We'll deliver only the buttons...

FLITE WING BUTTONS, 16MM (2 pieces) GOLD Heavy duty polished and anodized alloy wing buttons for bolt on buggy wing and touring cars. Large 16mm diameter to securely hold your wing while offering protection from crashes. Requires the use of 3mm countersunk screws, not included. The last picture shows the buttons in build condition (blue). We'll deliver only the buttons...

FLITE WING BUTTONS, 16MM (2 pieces) GUN METAL Heavy duty polished and anodized alloy wing buttons for bolt on buggy wing and touring cars. Large 16mm diameter to securely hold your wing while offering protection from crashes. Requires the use of 3mm countersunk screws, not included. The last picture shows the buttons in build condition (blue). We'll deliver only the buttons...

FLITE WING BUTTONS, 16MM (2 pieces) LIGHT BLUE Heavy duty polished and anodized alloy wing buttons for bolt on buggy wing and touring cars. Large 16mm diameter to securely hold your wing while offering protection from crashes. Requires the use of 3mm countersunk screws, not included. The last picture shows the buttons in build condition (blue). We'll deliver only the buttons...

FLITE WING BUTTONS, 16MM (2 pieces) ORANGE Heavy duty polished and anodized alloy wing buttons for bolt on buggy wing and touring cars. Large 16mm diameter to securely hold your wing while offering protection from crashes. Requires the use of 3mm countersunk screws, not included. The last picture shows the buttons in build condition (blue). We'll deliver only the buttons...

FLITE WING BUTTONS, 16MM (2 pieces) RED Heavy duty polished and anodized alloy wing buttons for bolt on buggy wing and touring cars. Large 16mm diameter to securely hold your wing while offering protection from crashes. Requires the use of 3mm countersunk screws, not included. The last picture shows the buttons in build condition (blue). We'll deliver only the buttons...

G.LOK Gear Locker - black Most gear caddies leave your pinions exposed to get dinged or dirty- the G.LOK encases your gears in a dust, debris and moisture resistant shell that protects the teeth from getting nicked. The protective cover is securely held on via the threaded center post and once removed can be threaded back on into the parts tray mode. You do NOT need to...

Fan Mount Clamp on Set, 1/10 Buggies, Trucks - black Special clamp on alloy fan mount for today's buggies and sedans. The included mounting bracket has multi-mount features that allows the fan to be angled or parallel with the motor can. Lightweight, secure and just what you needed to easily mount a fan in tight spaces! The angled design allows easy mounting of fans in 2wd...

Fan Mount Clamp on Set, 1/10 Buggies, Trucks - blue Special clamp on alloy fan mount for today's buggies and sedans. The included mounting bracket has multi-mount features that allows the fan to be angled or parallel with the motor can. Lightweight, secure and just what you needed to easily mount a fan in tight spaces! The angled design allows easy mounting of fans in 2wd...

Fan Mount Clamp on Set, 1/10 Buggies, Trucks - orange Special clamp on alloy fan mount for today's buggies and sedans. The included mounting bracket has multi-mount features that allows the fan to be angled or parallel with the motor can. Lightweight, secure and just what you needed to easily mount a fan in tight spaces! The angled design allows easy mounting of fans in 2wd...

Machined from black POM , for that stealthy look, these gears offer extra quiet operation with full face teeth (4.5mm) for excellent mesh and durability. Also incorporates a machined alloy keyed collar for secure mounting with the included heavy duty 3mm set screw that uses standard 1.5mm hex wrenches. Teeth size clearly laser engraved. The 30T is only 1.4gr! For spec 17.5...

Machined from black POM, for that stealthy look, these gears offer extra quiet operation with full face teeth (4.5mm) for excellent mesh and durability. Also incorporates a machined alloy keyed collar for secure mounting with the included heavy duty 3mm set screw that uses standard 1.5mm hex wrenches. Teeth size clearly laser engraved. The 32T is only 1.5gr! For spec 17.5...

Machined from black POM, for that stealthy look, these gears offer extra quiet operation with full face teeth (4.5mm) for excellent mesh and durability. Also incorporates a machined alloy keyed collar for secure mounting with the included heavy duty 3mm set screw that uses standard 1.5mm hex wrenches. Teeth size clearly laser engraved. The 33T is only 1.5gr! For spec 17.5...

76mm Puck Bones Titanium 1 Pair for Bi-Metal Bone Systems Titanium replacement bones for the MIP Bi-Metal Bone Puck sets. Half the weight of steel (each bone weighs 3.1gr) and twice the strength of aluminum so that you achieve a lightweight drive line but increase the durability and reduced wear and tear. Be sure to use a small amount of blue thread lock for hardware and...

67mm Puck Bones Titanium 1 Pair for Bi-Metal Bone Systems Titanium replacement bones for the MIP Bi-Metal Bone Puck sets. Half the weight of steel (each bone weighs 2.3gr) and twice the strength of aluminum so that you achieve a lightweight drive line but increase the durability and reduced wear and tear. Be sure to use a small amount of blue thread lock for hardware and...

Delivery content: Only the two graphite tabs. No post, no shims, no screws. Suitable for 1:10 - can be used for a lot of different cars.

When all of your wrenches looks the same, these collars help quickly locate the size you're needing to grab when your are working to get back on track asap. For the most popular sizes the collars are used with 1.5, 2.0, 2.5 and 3.0 metric wrenches and include 2mm holding set screws and the needed .9mm Allen key. Note: the 1.5, 2.0 and 2.5 wrench shafts must be 3mm diameter...

190mm 1/10 GT polycarbonate body and wing set. Exotek is excited to bring you our bold new contender for the highly competitive USGT / GT classes! Designed for domination with an aggressive splitter, muscular fenders, low slung hood, downforce inducing side skirts and a sports car cockpit for the most aggressive aero package with minimal drag. The body has 2 trim lines...

Designed for domination with an aggressive splitter, muscular fenders, low slung hood, downforce inducing side skirts and a sports car cockpit for the most aggressive aero package with minimal drag. The body has 2 trim lines marked on the bottom: 1 for low profile shock towers and the 2nd mark for extra low body mounting on cars such as the A800X. The wing has 2 trim lines:...

New V2 mount with larger double screw mounting bar. The extra modular design means that with a few adjustments you can mount a fan securely in any 1/8 truggy and most e-buggies and the mount positions the fans 10-14mm away from your motor can. This proper spacing helps insure the fan does not lose rpms due to magnetic interference from your motor. A fan that is placed to...

New V2 mount with larger double screw mounting bar. The extra modular design means that with a few adjustments you can mount a fan securely in any 1/8 truggy and most e-buggies and the mount positions the fans 10-14mm away from your motor can. This proper spacing helps insure the fan does not lose rpms due to magnetic interference from your motor. A fan that is placed to...

Replacement heavy duty fan mounting bar for attaching 40mm or 30mm fans to Exotek fan mount 1718, 1756 or 1914. Exotek fan clamps, fans and M3 hardware not included.

Now you can easily mount 2 high powered 40mm fans to the Exotek 1/8 fan mounts - a must to protect your expensive high voltage motor package. Bolts directly to Exotek 1914 and 1756 for double the cooling power in high heat applications. The fan mount positions the fans about 10mm away from the motor can. This proper spacing helps to insure the fan does not lose rpms due to...

Exoteks Touring Car style 30mm fan shroud blasts your fans air directly onto your motor for maximum cooling effect, while also acting as a finned heat sink that adds additional ambient cooling. Importantly, the shroud positions the fan about 12mm away from the motor can to help prevent the motor magnets from impeding the fan motor and the shrouds lightweight alloy...

Exoteks 40mm fan shroud blasts your fans air directly onto your motor for maximum cooling effect, while also acting as a finned heat sink that adds additional ambient cooling. Importantly, the shroud positions the fan about 12mm away from the motor can to help prevent the motor magnets from impeding the fan motor and the shrouds lightweight alloy construction insures factory...

Exoteks Touring Car style 30mm fan shroud blasts your fans air directly onto and through your motors vents for maximum cooling effect. Importantly, the shroud positions the fan about 12mm away from the motor can to help prevent the motor magnets from impeding the fan motor and the shrouds lightweight alloy construction insures factory good looks and extra durable quality....

Nothing is grander than a fine classic car that has been refabricated into a modern handling super car. Introducing the Stuttgart 225wb mini chassis 'super car' body. With it's wide body fenders, aggressive front splitter, low side skirts, lowered stance and of course the unmistakable tuning shop style double wings, the Stuttgart produces incredible handling in a lightweight...

Raised hub design improves the roll center (+1mm higher) and creates better cvd clearance from the lower arm. Anodized black and silver chamfered to match the factory looks. NOTE: Must slightly trim the top of the ball cups for wheel clearance as shown.

P1-Z USGT approved! The legendary 6X USGT National winning body returns with a new name but with the same great looks and handling! 1/10 GT body with an aggressive splitter, flared fenders, low slung hood, downforce inducing side skirts and extra rear spoiler elements for the most aggressive aero package with minimal drag. The body uses premium polycarbonate that is a...

Long reach style ride height gauge makes for much easier ride height measurements for pan car style chassis cars. The longer reach helps to clear the lipo and side links so that the ride height is not skewed by the gauge hitting the lipo and links. The 2 sided gauge measures from 3.5 - 6mm and is made of precision machined alloy.

Flite Spur Gear 48dp 81 Teeth

Flite Spur Gear 48dp 84 Teeth

Machined alloy wheelie wheel with pressed bearing. Outer diameter 23mm.

Replacement O-Ring for Wheelie Bar Wheel. Outer diameter 23mm.

Super F1 race body for the F1Ultra and similar dimensioned narrow style 1/10 F1 pans cars. Modern design with slim style side pods with the addition of high downforce aero details for good looks and high performance. The body is made from premium polycarbonate that is a proprietary custom blended polycarbonate only for Exotek that is much stronger and longer lasting than...

Classic auto shop design printed on premium charcoal grey short sleeve t-shirt. Printed in the USA on Gildan Ultra cotton t-shirts which are made of 100% preshrunk cotton. This top selling tee features double-needle stitching throughout, a seamless collar, and is taped shoulder to shoulder for added durability and comfort. Note: sizing runs a little large, please see the...

Classic auto shop design printed on premium charcoal grey short sleeve t-shirt. Printed in the USA on Gildan Ultra cotton t-shirts which are made of 100% preshrunk cotton. This top selling tee features double-needle stitching throughout, a seamless collar, and is taped shoulder to shoulder for added durability and comfort. Note: sizing runs a little large, please see the...

Classic auto shop design printed on premium charcoal grey short sleeve t-shirt. Printed in the USA on Gildan Ultra cotton t-shirts which are made of 100% preshrunk cotton. This top selling tee features double-needle stitching throughout, a seamless collar, and is taped shoulder to shoulder for added durability and comfort. Note: sizing runs a little large, please see the...

Classic auto shop design printed on premium charcoal grey short sleeve t-shirt. Printed in the USA on Gildan Ultra cotton t-shirts which are made of 100% preshrunk cotton. This top selling tee features double-needle stitching throughout, a seamless collar, and is taped shoulder to shoulder for added durability and comfort. Note: sizing runs a little large, please see the...

Converts the popular single wheel bars into a 2 wheel bar and maintains all of the adjustability of the original design. Includes the heavy duty carbon fiber "Y" bar, 1 wheel and 1 wheel mount.

The caster doodles provide easy to read "pointers" that tell you the caster degrees of the front steering knuckles when used with 1/10 TC type camber setup gauges as shown (not included). Works with setup systems by HUDY, Arrowmax or similar build 1/10 TC setup stations (not included, but required). One pair of finely machined alloy units that simply slides onto the stock F1...

Three sway bar weights are included (soft, medium, hard) so that the F1 ULTRA can be tuned for different tracks. Includes ball bearing supported mount that attaches to most standard F104 wings such as Montech, Tamiya, Protoform, etc. Does NOT fit the Serpent wings. The mount also has centering screws to insure it stays centered on the wing. The sway bar tension can be...

New lightweight damper tubes for the F1 ULTRA to minimize bumpy asphalt track conditions. Extra lightweight and positioned for low center of gravity and tucked away to avoid frontal impacts for more durability. Machined POM barrels and alloy tubes with included steel ball ends. Requires heavy weight silicone lube - 1mil to 2mil.

194mm 1/10 GT polycarbonate clear body and wing set. Exotek is excited to bring you the TYPE A , our 'retro' new contender for the highly competitive USGT / GT classes! A true classic style body we all miss, born from the days of JGTC and Gran Turismo but updated to compete on todays race circuits. Designed with an aggressive splitter, muscular fenders, low slung hood,...