ALU SHIM 3x6x1.0MM - BLACK (10)

ALU SHIM 3x6x1.0MM - ORANGE (10)

ALU SHIM 3x6x2.0MM - BLACK (10)

ALU SHIM 3x6x2.0MM - ORANGE (10)

ALU ANTI-ROLL BAR BALL JOINT 5.8 MM - SWISS 7075 T6 - HARD COATED (2 pieces)

SPRING C=7.8 FOR GEAR BOX - MEDIUM - SILVER (2 pieces)

RECEIVER SWITCH - SET

Side guards with incorporated larger bottom radius to make the car more stable on rough tracks, and increase the car’s longitudinal flex. The side guards are molded from SOFT composite mixture for increased flex to generate more traction. The composite side guards protect the car, muffler, and fuel tank from side impacts. The side guards perfectly fit the chassis and seal...

XB8 2016 Graphite Upper Plate

XB8 Carbon Shock Tower front 4mm

C-Hub Composite Front Lower Suspension Arm - Medium

C-Hub Composite Front Lower Suspension Arm - Graphite

GRAPHITE-hardness front UPPER suspension arm made from high-tech graphite composite material. Universal design allows the arm to be used on both left & right sides.

MEDIUM-hardness front UPPER suspension arm made from high-tech composite material. The exclusive composite mixture used for suspension arms gives a perfect balance between reliability and performance; the suspension arm is rigid enough for a responsive feel, yet soft enough for extreme durability. The medium-hardness arm is suitable for most track conditions, especially...

PB Composite Steering Block

PB Composite Steering Block Graphite

Front Anti-Roll Bar 2.3mm

Anti-Roll Bar 1.6mm Front

Anti-Roll Bar 1.8mm Front

Anti-Roll Bar 2.0mm Front

XB8 2014 Front Anti-Roll Bar 2.2mm

XB8 2014 Front Anti-Roll Bar 2.3mm

XB8 2014 Front Anti-Roll Bar 2,5mm

XB8 2014 Front Anti-Roll Bar 2.6mm

Ball Stud 6.8mm (4)

Ball Stud 6,8mm With Backstop L=6mm - M3x8 (2 pieces)

Alu Countersunk shim for ball stud (10)

XB8 2016 Graphite Rear Shock Tower CNC Machined 3.5mm

Composite Rear Lower Suspension Arm - Hard

Composite Rear Lower Suspension Arm - Graphite

Composite Rear Lower Suspension Arm - Graphite

Lightweight composite mud guard for rear suspension arms protects the rear drivetrain in wet & dirty track conditions. Set of L+R. Fits both longer and shorter rear suspension arms on XB8 (2014 and later), XB808, XB9 and GTX cars.

Graphite Braces for Chassis Side Guards Set

XB8 2016 Graphite Braces for rear Composite Brace Set PAY ATTENTION: The manual of your GTXE 2022 says that you can use 353281 as an optional stiffener for your car. This is WRONG. You will need THIS stiffener instead of :-)

Graphite Braces for rear Composite Brace Set PLEASE TAKE CARE: This stiffener will not fit into your GTXE 2022 - even if your manual tells you that it will work. You will need 353280 instead of 353281!

Alu Rear Lower Susp. Holder +2mm - Rear (7mm) - RR - Swiss 7075 T6

The rear uprights were redesigned and feature larger outside 8x16x5mm ball-bearings for increased reliability and life-span. To extend the set-up alternatives, an additional lower roll-center adjustment position was added. The smart design allows the same upright to be used on both left & right sides. The lower suspension pin on which the rear upright sits features 2 shims...

Lightweight yet ultra-strong rear upright molded from special graphite composite material. Features larger outside 8x16x5mm ball-bearing for increased reliability and life-span. Graphite rear upright is very strong and makes the rear of car very stable, yet is very light taking some load off of the rear suspension. Improves bump absorbing and handling on bumpy tracks. To...

The rear uprights were redesigned and feature larger outside 8x16x5mm ball-bearings for increased reliability and life-span. To extend the set-up alternatives, an additional lower roll-center adjustment position was added. The smart design allows the same upright to be used on both left & right sides. The lower suspension pin on which the rear upright sits features 2 shims...

Genuine spare and option parts by XRAY!

Rear Anti-Roll Bar 2.0mm

XB8 2014 Rear Anti-Roll Bar 2.2mm

XB8 2014 Rear Anti-Roll Bar 2.4mm

XB8 2014 Rear Anti-Roll Bar 2.5mm

XB8 2014 Rear Anti-Roll Bar 2.6mm

Rear Wing polycarbonate - 200mm wide

Alu Rear Wing Mount Brace (2)

Alu Rear Wing Shim (2)

Central Differential - Set long

XB8 2017 Front/Rear Diff Large Bevel Gear 44T

XB8 2017 Front/Rear Diff Large Bevel Gear 45T

Center Diff Spur Gear 48T

Center Diff Spur Gear 47T

Center Diff Spur Gear 45T

XB8 2014 Center Diff Spur Gear 44T

Center Diff Spur Gear 46 Teeth large

Center Diff Spur Gear 47 Teeth large

Center Diff Spur Gear 48 Teeth large

Precision-ground polished steel pin 3.5 x 33 mm for internal satellite gears used in large center differential #355013. Mounted in steel inserts instead of directly mounted in differential case increases the lifetime, especially in high temperatures. Set of 2.

Bevel Drive Gear 12T