SET OF ALU SHIM (1.0MM, 2.0MM, 3.0MM)

T4 2014 - Alu Shims (3x6x0.5mm) - black

T4 2014 - Alu Shims (3x6x0.5mm) - orange

T4 2014 - Alu Shims (3x6x0.5mm) Will be delivered BULK.

ALU SHIM 3x6x1.0MM - BLACK (10)

ALU SHIM 3x6x1.0MM - ORANGE (10)

XRAY T2 Alu Scheiben - 3x6x2.0mm (10 Stück)

ALU SHIM 3x6x2.0MM - ORANGE (10)

XB4 2016 - Graphite Gear Diff Gears - LOW (2+4) Replacement for 304931

Composite Shock Ball Joint - longer than the standard one (368010), for a longer shock.

DIFF BEVEL & SATELLITE GEARS (2+4)

ALU DIFF PIN - HARD COATED (2)

XB4 2014 Graphite Long Upper Deck

Body Mount - extra Short

Roll Center Brace

Composite Front Suspension Arm Lower - hard

COMPOSITE C-HUB 9° DEG. RIGHT - Graphite

COMPOSITE C-HUB 9° DEG. RIGHT - Hard

C-Hub Right - 6° - Graphite

COMPOSITE C-HUB 9° DEG. LEFT - Graphite

COMPOSITE C-HUB 9° DEG. LEFT - Hard

C-Hub Left - 6° - Graphite

Replaces thec-hub XRAY 362210 and therefore fits all XB4 versions, including the new 2022. The C-Hub made from alloy does not bend as much as the composite one and creates more precision. The setup stays true.

Aluminum RIGHT C-hub with pre-set 12° is CNC-machined from premium Swiss 7075 T6 aluminum. Additionally black coated and laser engraved. Designed & recommended for use in high-traction conditions. Increases steering out of the corner, and makes the car more stable going into corners. Roll center position can be easily and quickly adjusted by inserting different thickness of...

Replaces thec-hub XRAY 362220 and therefore fits all XB4 versions, including the new 2022. The C-Hub made from alloy does not bend as much as the composite one and creates more precision. The setup stays true.

Aluminum C-hub with pre-set 12° is CNC-machined from premium Swiss 7075 T6 aluminum. Additionally black coated and laser engraved. Designed & recommended for use in high-traction conditions. Increases steering out of the corner, and makes the car more stable going into corners. Roll center position can be easily and quickly adjusted by inserting different thickness of shims...

COMPOSITE STEERING BLOCK

COMPOSITE STEERING BLOCK

ALU CONICAL SHIM 3x6x2.0MM - BLACK (10)

Alu Conical Shim 3x6x2.0mm - Orange (10)

ANTI-ROLL BAR 1.0 MM

ANTI-ROLL BAR 1.1 MM

ANTI-ROLL BAR 1.3 MM

ANTI-ROLL BAR 1.4 MM

ANTI-ROLL BAR 1.6 MM

ANTI-ROLL BAR 1.8 MM

Anti-Roll Bar 2.0mm

Made of hard composite material (XRAY calls it graphite) for a more stiff part.

Original spare and option parts from XRAY!

Made of hard composite material (XRAY calls it graphite) for a more stiff part.

BALL END 4.9MM WITH THREAD 4MM (2) Official replacement for XRAY 302652

BALL END 4.9MM WITH THREAD 5MM (2)

Rear Shock Tower Protector

Composite Suspension Arm Rear Lower Right - hard

Composite Suspension Arm Rear Lower Left - hard

Graphite Rear Arm Stiffener (2)

High-precision eccentric 5.8mm pivot ball allows to mount the shocks in a different angle. Set of 2. Can be used as following: XB2 – in front and rear XB4 – in rear XT2 – in rear XT4 – in front and rear

XB4 2014 Brass Rear Lower Suspension Holder +2 - RR+RF - Set

Aluminum rear upright CNC-machined from premium Swiss 7075 T6 aluminum. Designed & recommended for in high-traction conditions. Increases rear stability. Features additional upper roll center positions for fine tuning. Roll center height can be adjusted using shims between upright and upper link. Wheelbase range has been increased and can be adjusted within a range of 4mm....

Aluminum rear upright CNC-machined from premium Swiss 7075 T6 aluminum. Designed & recommended for in high-traction conditions. Increases rear stability. Features additional upper roll center positions for fine tuning. Roll center height can be adjusted using shims between upright and upper link. Wheelbase range has been increased and can be adjusted within a range of 4mm....

Composite Rear Hub

XB4 REAR HUB - GRAPHITE

Composite Rear Hub - hard

XB4 POLYCARBONATE REAR WING 1.5mm (2)

XB4 POLYCARBONATE REAR WING 2.0mm (2)

SLIPPER CLUTCH SPRING C=30 - BLACK

Original spare and option parts from XRAY!

COMPOSITE GEAR DIFFERENTIAL CASE Graphite version - more strong and durable.

Ball Adjustable Differential - Set - HUDY Spring Steel™

XB4 Ball Differential Short Output Long - HUDY Spring Steel Accessories for the XRAY XB4 Ball Differential 365000.