Measure 137mm x 60mm x28mm in size, and only 210g in weight, makes it ideal to fit in any pit-bags. Featuring a very small footprint this DC unit can charge up to 7A and discharge at maximum 1A and can handle all the common types of batteries. A special High Voltage mode had been added to support the new generation of Li-HV batteries. Simple and easy to use manual with LCD...

PLEASE NOTE! This charger can only charge 1S LiPo batteries. It can NOT charge 2S LiPo batteries such as CA15432.

Charger for 6 cell NiMH battery packs with a charging current of 4 amps and automatic cut-off after charging. With TAMIYA-plug. The LED shows the actually charging status. Technical data: Input voltage: 100-240 V, 50-60 Hz (AC) Charging current: max 4 A / 8.4 V Battery types: NiMH 6 cells Technical details: - automatic cut off after charging - suitable for NiMH 6 cells...

Technical data: Input voltage: 100-240 V, 50-60 Hz (AC) Charging current: 500 mA / 8.4 V Battery types: 6 cells 7.2 V NiMH Included: Plug charger, manual Technical details: - automatic cut off after charging - suitable for NiMH 6 cells battery 7.2 V - TAMIYA plug

Input Voltage: 10-30V DC or 230V AC LiPo Cells: 1-6S (even HV cells) Charging Current: 0.1-8.0A Charging Power: 200W (50W if it's used AC) Discharging Power: 10W Size: 110x110x31mm Weight: 350g Battery Connector: XT60 Balancer Connector: XH Content Charger, Manual, Screenprotecter, isDT decal, Power cable

Input Voltage: 10-30V DC or 230V AC LiPo Cells: 1-6S (even HV cells) Charging Current: 0.1-8.0A Charging Power: 200W (50W if it's used AC) Discharging Power: 10W Size: 110x110x31mm Weight: 350g Battery Connector: XT60 Balancer Connector: XH Content Charger, Manual, Screenprotecter, isDT decal, Power cable

Input Voltage: 10-34V DC LiPo Cells: 1-8S (1-7S HV-cells) Charging Current: 0.1-20.0A Charging Power: 500W (@27V) Discharging Current: 0.1-1.5A Size: 80x80x34mm Weight: 170g Battery Connector: XT60 Balancer Connector: XH Content: Charger, Manual, Screenprotecter, isDT decal

Input Voltage: 5-12V via USB C Cells: AAA / AA / 18650 Charging Current: 0.1-3.0A Charging Power: 36W Discharging Current: up to 1.5A Content: Charger, Manual, Screenprotecter, isDT decal, Power cable Content: Charger, Manual, Screenprotecter, isDT decal, Power cable

Input Voltage: 230V AC / 10-30V DC LiPo Cells: 1-6S (even HV cells) Charging Current: 0.1-12.0A Charging Power: 250W DC / 100W AC Discharging Power: 15W Size: 126x115x49mm Weight: 460g Battery Connector: XT60 Balancer Connector: XH Content: Charger, Manual, Screenprotecter, isDT decal, Power cable

Input Voltage: 10-30V DC / 100-240V AC LiPo Cells: 1-6S (even HV cells) Charging Current: 0.2-10.0A Charging Power: 2x250W DC / 200W AC Discharging Power: NO DISCHARGING POSSIBLE! Size: 135x115x49mm Weight: 485g Battery Connector: XT60 Balancer Connector: XH Content: Charger, Manual, Screenprotecter, isDT decal, Power cable

Input Voltage: 10-30V DC / 100-240V AC LiPo Cells: 1-6S (even HV cells) Charging Current: 0.2-20.0A Charging Power: 2x5 500W DC / 200W AC Discharging Power: 30W Size: 142x135x64mm Weight: 700g Battery Connector: XT60 Balancer Connector: XH Content: Charger, Manual, Screenprotecter, isDT decal, Power cable

Input Voltage: 10-34V DC / 100-240V AC LiPo Cells: 1-8S (even HV cells) Charging Current: 0.2-20.0A Charging Power: 400W AC / 1200W DC Discharging Power: 60W Size: 176x183x57mm Weight: 1230g Battery Connector: XT60 Balancer Connector: XH Content: Charger, Power Cable, manual, display screenprotector, iSDT decal Take care: Doesn't work when used combined with the SP245 or...

Input Voltage: 5-12V DC via USB QC 2.0 Cells: AAA / AA / 18650 Charging Current: 0.1-1.5A Charging Power: 18W Discharging Current: up to 1.0A Content: Charger, Manual, Screenprotecter, S DT decal, USB cable

Input Voltage: 10-30V DC LiPo Cells: 1-6S (even HV cells) Charging Current: 0.2-10.0A Charging Power: 400W (@25V - parallel mode) Discharging Power: NO DISCHARGING POSSIBLE! Size: mm Weight: 250g Battery Connector: XT60 Balancer Connector: XH Content: Charger, Manual, Screenprotecter, isDT decal

Input Voltage: 10-34V DC LiPo Cells: 1-8S (even HV cells) Charging Current: 0.2-20.0A Charging Power: 800W (@25V - parallel mode) Discharging Power: 2x 15W Size: mm Weight: g Battery Connector: XT60 Balancer Connector: XH Content: Charger, Manual, Screenprotecter, isDT decal,

Input Voltage: 10-34V DC LiPo Cells: 1-8S (even HV cells) Charging Current: 0.2-30.0A Charging Power: 1500W (@25V) Discharging Power: 2x 30W Size: 110x110x65mm Weight: 730g Battery Connector: XT60 Balancer Connector: XH Content: Charger, Manual, Screenprotecter, isDT decal, 1x XT90 Plug

Input Voltage: 10-30V DC LiPo Cells: 1-6S (even HV-cells) Charging Current: 0.1-8.0A Charging Power: 200W (@24V) Discharging Current: 0.1-1.0A Size: 72x72x32mm Weight: 120g Battery Connector: XT60 Balancer Connector: XH Content: Charger, Manual, Screenprotecter, isDT decal

Input Voltage: 10-34V DC LiPo Cells: 1-8S (1-7S HV-cells) Charging Current: 0.1-30.0A Charging Power: 1000W (@32V) Discharging Current: 0.1-1.5A Size: 95x95x45mm Weight: 288g Battery Connector: XT60 Balancer Connector: XH Content: Charger, Manual, Screenprotecter, isDT decal

Junsi - iCharger 4010 Duo - 12V LiPo Charger up to 70A - 2000W POWER - 2x Output

Junsi - iCharger 456 Duo - 12V LiPo Charger up to 70A - 1600W POWER - 2x Output

Junsi - iCharger 458 Duo - 12V LiPo Charger up to 70A - 2200W POWER - 2x Output

Junsi - iCharger 4512 Duo - 12V LiPo Charger up to 80A - 2800W POWER - 2x Output

2 Outputs - up to 1200W (0.05 - 30.0 A , 1-12 cells) each // 1700W max. combined Up to 50A when used in sync-mode! 50W discharge power per each output (80W max. combined) 2A balancing current (4A in sync-mode) 11-53V DC input 111.5x128.5x40mm XT60 charging output XT90 power input XH balancing ports

Get the best combination of the well known iCharger 406 DUO and the latest X platform! 2 Outputs - up to 900W (0.1 - 30.0 A , 1-6 cells) each // 1500W max. combined Up to 50A when used in sync-mode! 40W discharge power per each output (60W max. combined) 2A balancing current (4A in sync-mode) 9-34V DC input 92x112.5x40mm 360g XT60 charging output XT90 power input XH...

Get the best combination of the well known iCharger 308 DUO and the latest X platform! 2 Outputs - up to 1100W (0.05 - 30.0 A , 1-8 cells) each // 1600W max. combined Up to 50A when used in sync-mode! 45W discharge power per each output (70W max. combined) 2A balancing current (4A in sync-mode) 9-49V DC input 97.5x128.5x40mm 440g XT60 charging output XT90 power input XH...

Junsi S6 - iCharger S6 - 12V LiPo Charger up to 40A - 1100W POWER

Junsi X12 - iCharger X12 - 12V LiPo Charger up to 30A - 1100W POWER

Junsi X8 - iCharger X8 - 12V LiPo Charger up to 30A - 1100W POWER

Input Voltage: 10-30V DC / 100-240V AC LiPo Cells: 1-6S (even HV cells) Charging Current: 0.2-20.0A Charging Power: 2x5 500W DC / 200W AC Discharging Power: 2x 02-1.5A Size: 142x135x64mm Weight: 700g Battery Connector: XT60 Balancer Connector: XH Content: Charger, Manual, Screenprotecter , Power cable

Input Voltage: 10-30V DC LiPo Cells: 1-6S (even HV cells) Charging Current: 0.2-10.0A Charging Power: 2x250W DC Size: 90.5x90.5x47mm Weight: 250g Battery Connector: XT60 Balancer Connector: XH Content: Charger, Manual

A high-performance microprocessor, specialized operating software, and many advanced features make it the perfect charging solution for new hobbyists, casual enthusiasts, or hardcore racers. Simultaneous charging of two batteries at up to 14A is possible thanks to a powerful integrated power supply. Storage of up to 10 different charge profiles (per channel) allows for easy...

The RC215 500W Dual Channel LiPo Battery DC Charger is a compact and powerful device that allows to charge up to two battery packs simultaneously with up to 15A of charge current. When used in the combined ASYNC mode, a maximum of 25A of charge current is possible. The DC charger can be used with 1S to 6S LiHV/LiPo, 1 to 16 cell NiMH or 1S to 10S batteries and it works with...

Specifications & features: Input voltage: 100-240V AC; 7-28VDC, max. 30A Integrated 200W power supply Battery type: LiHV/LiPo/LiIon 1-6S, NiMH 1-16S, Pb 1-10S Charge power: 0.1-15A (max. 250W per channel in SYNC mode), 0.2-25A (max. 500W both channels combined in ASYNC mode) Discharge power: 0.1-3A (max. 12W per channel), 0.1-15A (max. 250W per channel in Recycle mode)...

Charging batteries is usually a primitive, boring and mundane activity, and it still is. What matters during the charging process, especially for AA/AAA NiMH battery charging? No doubt, accuracy and safety! The creation of NC1500 not only arises out of the need but also from the desire to have a simple but safe and accurate charger for the battery. NC1500 has four...

The NC2200 charger is a compact charger for up to 4 rechargeable NiMH / NiCd batteries in sizes AA or AAA. With four independent slots, the batteries can be charged differently depending on their capacity. And to further increase comfort, the VA display shows the most important data such as the charging current, the battery capacity as well as the internal resistance, the...

Features Simply plug in and charge optimally Built-in circuit for delta peak detection Suitable for 4-8 NiMH cells Connect directly to the socket with a voltage range of 100V to 240V Various protective mechanisms (reverse polarity protection, short circuit protection, low operating temperature) Loading status display: Red (steady): standby Red (flashing): error Green...

Features Simply plug in and charge optimally Built-in circuit for delta peak detection Suitable for 4-8 NiMH cells Connect directly to the socket with a voltage range of 100V to 240V Various protective mechanisms (reverse polarity protection, short circuit protection, low operating temperature) Loading status display: Red (steady): standby Red (flashing): error Green...

The SkyRC T400Q offers user-friendly charging and discharging of the most common battery types (LiPo, LiFe, LiIon, LiHV, NiMH, NiCd, Pb) in its usual simple, slim tower design. This AC/DC device manages a full 100W at 12A on all of its four independent outputs, making it a total of 400W. In contrast to other devices in the SkyRC T-series, the T400Q has optimized software...

SKYRC D400 is a twin-channel charger with two independent circuits which can charge two different kinds of batteries simultaneously. It also supports power distribution in AC mode to get max charging power to shorten charging time. The total power for Channel 1 and Channel 2 is 400W. For example, you can set channel 1 as 300W, the channel 2 will be 100W. Your Ultimate Duo...

Powerful, Tiny, Smart, that is it! Under this slogan the new B6 nano is designed. Easy to read, high contrast display with all important parameters for charging/discharging process. The B6 Nano is intuitively controlled with 3 capacitive touch buttons. Internal Bluetooth module confers B6 Nano on its ability to be controlled by APP. This product is suitable for charging and...

Features: Compact design Excellent performance High contrast display Easy operation with 3 capacitive touch buttons XT-60 connector in/out XH balancer connector Suitable for LiPo/LiHV/Lilon/LiFe/NiCd/NiMH/Pb Technical Specifications: Input Voltage DC: 7V - 32V Max Charge Power: 220W Max Discharge Power: 5W Charge Current Range: 0.1A - 13.0A Discharge Current Range: 0.1A -...

SkyRC S65 is a powerful charger with battery management, suitable for use with all common battery types such as LiPo, LiHV, Lilon, LiFe, NiCd, NiMH, PB and AGM. The SkyRC S65 charger provides a remarkable 65Watt charging power in a compact housing design. At the front there is a built-in XT60 plug to which you can simply connect your battery or charging cable and avoid the...

The SkyRC T200 is a universal AC/DC multi-function charger/discharger that can be used with the most popular battery types, such as LiPo/LiHV/Lilon/LiFe/NiCd/NiMH/Pb. With 100 Watt charging power per charging channel the T200 charger provides more than sufficient charging power for most applications. The SkyRC T200 offers all the usual charge and discharge modes such as:...

Features: 2 independendt channels 2x 50W charging power, maximum 5.0A improved display incl. battery icon and procentage 3 decimal places for voltage 10 profiles safeable AGM and Pb Cold Charge Modus easy use and menu XT-60 plug as charging output many safety surveillances Technical data: Input Voltage AC: 100V - 240V Charging power: 2x 50W Charging voltage: 0.1A - 5.0A...

Features: 2 independent charging channels Up to 450W (AC) or 1000W (DC) charging power Smart power distribution High-contrast 2.8'' LCD display with ColorX user interface Intelligent fan control 20A per port for charging, 40A for discharging 35A parallel charging PD power charging hub Available languages: German, English, Japanese and Chinese Various security measurements...

Technical specification: Input Voltage: DC: 12V/3A Compatible Batteries: NiMH / NiCd (AA/AAA) Charging Current: 0.1-2.5A Discharging Current: 0.1-1.5A Cutoff Voltage (Discharge): 0.8-1.0V (adjustable) USB-Output: QC3.0, 5V/3A, 9V/2A, max. 18W -Delta V: 1-8mV (adjustable) Trickle Current: 30-99mA/OFF Over Heating Protection: 55-65°C / 131-149°F (adjustable) Weight: 600g...

Features: 200W AC charging power 800W DC charging power Control via scroll wheel button Lightweight and compact With PD/QC3.0 fast charge Compatible with SkyCharger App and Charger Master Technical Specifications: Input Voltage AC: 100-240V Input Voltage DC: 10-30V Charge Power: max. 200W (AC); max. 400Wx2 (DC) Discharge Power: 2x 10W external Discharge Power: max. 350W...

Features: NFC charging option included (BumpGO) 200W AC charging power 800W DC charging power Control via scroll wheel button Lightweight and compact With PD/QC3.0 fast charge Compatible with SkyCharger App and Charger Master Technical Specifications: Input Voltage AC: 100-240V Input Voltage DC: 10-30V Charge Power: max. 200W (AC); max. 400Wx2 (DC) Discharge Power: 2x 10W...

Features: 200W DC charging power 24W discharge power Pocket format Up to 3x faster loading times than the B6V2 Very quiet at around 48dB Compatible with SkyCharger App and Charger Master Technical Specifications: Input Voltage DC: 10-28V Input Voltage PD: 12-20V Charge Power: DC: 200W / PD: max. 80Q (20V, 5A) Discharge Power: max. 24W (6S, 4.2V/S) Charge Current: 0.1-10.0A...

Features: 200W DC charging power 60W AC charging power 19W discharge power Pocket format Compatible with SkyCharger App and Charger Master Technical Specifications: Input Voltage DC: 10-30V Input Voltage AC: 100-240V Charge Power: DC: 200W / AC: 60W Discharge Power: max. 19W (6S, 4.2V/S) Charge Current: 0.2-10.0A Discharge Current: 0.1-2.0A Balance current: max. 500mA Cells...

Discharge and test your batteries with up to 35A! 250W maximum discharge power. 6V - 35V Input. No power source needed - will use your battery for power!

TAKE CARE: This discharger will not work as stand alone device. You need to use it with a supported charger. Please note: As of November 2022 only the T1000 charger is supported. Technical Specifications: Input Voltage 5V (DC) Discharge Power: 350W Discharge Current: 0.1-40.0A Over Temperature Protection: >95°C Working Temperature: 0-40°C Working Humidity: 0-75% Weight:...