USA made 3MM carbon fiber front and rear tower set for the EXO-SIX Alloy Gear Box Set (requires Exotek EXO-SIX Gearbox set- not included). 2 mounting positions allow the use of standard TRF 'short' or option 'super short' dampers. Only the parts of the first pictures will be delivered! The pictures with the cars are only there for demonstration.

F1R ALLOY PIVOT BALLS

417 EXTRA FLEX TOP DECK

ALLOY TWIST NUTS BLACK LIGH BLUE = TAMIYA MEDIUM BLUE = ASSOCIATED, TRAXXAS GOLD = DURANGO ORANGE = HPI, XRAY RED = KYOSHO, TOP RACING

ALLOY TWIST NUTS

ALLOY TWIST NUTS MEDIUMBLUE LIGHT BLUE = TAMIYA MEDIUM BLUE = ASSOCIATED, TRAXXAS GOLD = DURANGO ORANGE = HPI, XRAY RED = KYOSHO, TOP RACING

ALLOY TWIST NUTS ORANGE LIGH BLUE = TAMIYA MEDIUM BLUE = ASSOCIATED, TRAXXAS GOLD = DURANGO ORANGE = HPI, XRAY RED = KYOSHO, TOP RACING

ALLOY TWIST NUTS PURPLE

ALLOY TWIST NUTS RED LIGH BLUE = TAMIYA MEDIUM BLUE = ASSOCIATED, TRAXXAS GOLD = DURANGO ORANGE = HPI, XRAY RED = KYOSHO, TOP RACING

ALLOY TWIST NUTS YELLLOW

BLOCK SPACERS- WIDE, FOR TRF AND XR3'12

HINGE BLOCKS, SPLIT FOR TRF, XB/B

HINGE BLOCKS, FOR TRF, A

HINGE BLOCKS, FOR TRF, B

HINGE BLOCKS, FOR TRF, C

HINGE BLOCKS, FOR TRF, E

HINGE BLOCKS, SPLIT FOR TRF, XA/A

F1 REPLACEMENT ADJUSTABLE ARMS (2)

Tamiya F104 Ultra Diff Axle - Black

Tamiya F104 Ultra Diff Axle - Blue

Tamiya F1R2 IFS Spring Set - Silver und Black

Tamiya F1 Servo Horn Plate for XRAY Servo Saver

Exotek 1163 - Tamiya TRF417 417XH Tuning LiPo Chassis Set

AE Heavy Duty Servo Horn - 25 Teeth - 7075 - BLACK For Futaba and all other 25 spline servos.

AE Heavy Duty Servo Horn - 25 Teeth - 7075 - BLUE For Futaba and all other 25 spline servos.

AE Heavy Duty Servo Horn - 23 Teeth - 7075 - BLACK For Aitronics/ Sanwa/ KO and all other 23 spline servos.

AE Heavy Duty Servo Horn - 23 Teeth - 7075 - BLUE For Aitronics/ Sanwa/ KO and all other 23 spline servos.

Tamiya F1R3 Carbon Chassis Rails Stiffens the front of the chassis area to better isolate the dampening action through to the dampers instead of the chassis for more responsive handling.

Tamiya F1 IFS Spring Set - 2x Soft, 2x Extra Soft

Tamiya EXO FIVE Alloy Chassisplate for EXO FIVE Conversion Kit black anodized and laser etched intricately machined for overall weight loss stiffer chassis flex traits than the carbon chassis 23gr heavier than the carbon chassis to ensure the lowest possible center of gravity made for carpet and asphalt you need a Tamiya TB EVO 5, which has been converted with a EXO FIVE...

FLITE Spur Gear 48dp 72 Teeth required: M3x6 Button Head Screws

EXO-SIX Flex Top Plate 2mm The new top plate is 2mm thick and slotted down the middle which translates to more chassis flex for increased traction overall. Some pictures show the item in build condition - we'll only deliver the items as mentioned above, no whole car.

Tamiya EVO6 / 419 Titanium Rear Axles - 1 pair Half the weight of steel and twice the strength of aluminum- these axles cut rotating weight, reduce unsprung weight and still remain durable for stock class racing. Some pictures show the item in build condition - we'll only deliver the items as mentioned above, no whole car.

One piece servo mount for Tamiya 419 series of touring cars. Solid design for less flex and less tweak after impacts. Only 9gr. Also for the Exotek RS7 conversion. Not for the shaft drive cars. One picture shows the part in build condition to show the usage.

For Tamiya series touring cars that are using the new 418 steering knuckles. Increases the rigidity over the stock nylon hubs for more consistent handling, especially in higher grip conditions. Increases the durability over the stock carbon nylon C-Hubs. Machined to still be light at 8gr for the pair. One picture shows the part in build condition to show the usage.

Exotek has streamlined the design and added in many pro features for the venerable TA07 such as: - adjustable battery mount-set - allows easy weight bias adjustments for forward or back battery placement - adjustable carbon battery cups - extra lightweight and adjustable to match any full lipo hard case packs - adjustable lipo tabs - securely holds in your lipo without the...

Allows for easier spur gear changes and easier motor mesh tightening and removal. Also has lowered CG. Fits original EXO-SIX as well.

This length is for the EXO-SIXv2 Carbon Drive Shaft.

Provides a solid tweak free design that is about 8gr lighter than each of the stock plastic TB05 gear boxes. Being 25% percent lighter than stock also means substantially lower center of gravity for improved chassis roll. New camber mounting points are more inboard for smoother handling when running longer camber link lengths and more robust to resist breakages as in the...

New heavy duty rear motor pod plate set for the Tamiya TRF103. Reinforced design greatly improves the rear pod durability of the stock TRF103 which is prone to bending or tweaking from rear impacts. Matches the stock geometry and provides threaded holes for mounting of an optional cooling fan on the left plate by using M2.5 screws (not included). 1 pair - left and right...

Universal type tire sander arbor set that can be used on multiple style of arbor or sander systems including even electric drills. The machined alloy 7075 arbor will fasten various 1/10th style wheels from off road or on-road vehicles. The arbor works with; 12mm hex wheels- 1/10 Touring car, Street Eliminators, Off Road buggies etc. 14mm hex wheels- 1/10 rear F1 tires 10mm...

194mm 1/10 Hyper Endurance body and wing set for modern low profile touring cars. Hyper realistic 24 hour endurance body that replicates the modern European LMH hypercar class. Complete with an extra long splitter for more steering, muscular fenders, extra low slung nose and hood, downforce inducing side skirts, large rear deck and 2 level rear wing for superb downforce or...

Polished silver finish to match the classic retro look and includes extra m3 hardware. Designed with precise bearing fit for slop free axle fit. Extra inner mounting location on the knuckle that provides more steering response than the stock location.

Polished silver finish to match the classic retro look and includes extra m3 hardware. Designed as a 1 piece unit for easier installation and more durability. Adds a few extra grams (unit weighs 18gr) for a little more steering.

Polished silver finish to match the classic retro look and includes extra m3 hardware. Designed with precise hinge pin fit and includes set screws for added hinge pin retention. Adds a few extra grams (unit weighs 15gr) for a little more steering.

Polished silver finish to match the classic retro look and heavy duty construction for smooth and precise steering operation. Designed with precise bearing fit.

Polished silver finish to match the classic retro look and heavy duty construction for smooth and precise steering operation. Designed with precise bearing fit. Supplied shims are used between the crank and the steering rack bearing.

New 1 piece design for ease of installation and less play. Must have for high powered racing applications. This is much stronger than the stock plastic idler gear but not indestructible so it is important to use black or white grease on the gears and reapply frequently to prolong its life.

For the Tamiya EVO6 or Exotek EXO-SIX and EXO-FIVE. Not for 418/419. 1 piece design to resist tweak and eliminate most of the hardware of other multi-piece designs. At 10.7gr it is actually a gram lighter than the stock Evo6 servo mount. Polished and anodized 7075 alloy.

EXO-FIVE replacement top plate set

Exotek EX5-6 - EXO-FIVE replacement hinge pins (2pcs)