Pit Map - large - 1200 x 600mm Using a non-slip rubberize materials at base, and toped with TC material on the surface, the pit mat are durable yet easy to fold up without leaving any wrinkles. With 1.2mm thickness, the chances of screws bouncing off are minimal.

Set-Up Frame (XL) For 1/8 Offroad Cars - Car Stand

Set-Up Frame (X) for 1/10 Offroad Cars - Car Stand

Multi Alu Case for screws (120x80x18) - Black Golden Designed in the latest 2017 black and golden Honeycomb Design. Made out of a solid piece of aluminium, this multi-purpose aluminium tray multi is ideal to store small parts during building, maintenance and setup work. The tray offers three compartments and build-in gauges help to measure the length and diameter of metrical...

Tools Base - V2 - Black Golden Light Weight Designed in the latest 2017 black and golden Honeycomb Design. now lightened Designed for: - 1x Multi Shock Clamp AM190031 - 4x 22mm handle - 4x 14mm handle - 12x 18mm handle - 3x V2 Turnbuckle Wrench Measurements: 225x53x20mm The last picture shows the Tools Base incl. tools - the tools are not part of this product!

Tools Base Designed in the latest black and golden Honeycomb Design. now lightened Designed for: - 2x 22mm handle - 4x 14mm handle - 6x 18mm handle - 2x V2 Turnbuckle Wrench - Multi-Shock Tool - 2x 5mm plug - 2x 4mm plug - ca.125x35mm small parts tray Measurements: 195x65x15mm

Tire Warmer (1/10) & Batt Warmer with Bag - Black/Golden Features: - Usable with Dual Power Source: 4S LiPo battery pack / 12-18V DC input (XT60 wire included) - Front & Rear temperature can be set independently - Temperature of 4 tires is controlled by MCU - 8 different beep tones - Minimum temperature - Celsius - Fahrenheit selectable display - Safety timer - Temperature...

Replacement for 1:10 touring tires (65mm diameter of the cups). 1 pair.

Replacement for 1:8 GT tires (98mm diameter). 1 pair.

Tire Warmer (1/8 GT) & Batt Warmer with Bag - Black/Golden Features: - Usable with Dual Power Source: 4S LiPo battery pack / 12-18V DC input - Front & Rear temperature can be set independently - Temperature of 4 tires is controlled by MCU - 8 different beep tones - Minimum temperature - Celsius - Fahrenheit selectable display - Safety timer - Temperature range: 20-80°C,...

This part tray is design to fit all of the Arrowmax setup system from 1/12th - 1/8th. With extra compartment to hold other accessories such as the setup wheel, and setup button. Finish with the signature black golden double anodize. Its a clean and organized way for your pit table. This is also a direct replacement for the tray included with the pit lamp. The shown setup...

Polycarbonat Car Stand - 1:12/1:10 On-Road - LIGHTWEIGHT - Clear Dimensions: Length: about 230mm Width: about 110mm Height: about 53mm Delivery: 1mm thick polycarbonate Car Stand, clear, uncut 2x non-slip pad, self-adhesive small sticker sheet

Polycarbonat Car Stand - 1:12/1:10 On-Road - LIGHTWEIGHT - Clear Dimensions: Length: about 230mm Width: about 120mm Height: about 45mm Delivery: 1mm thick polycarbonate Car Stand, clear, uncut 2x non-slip pad, self-adhesive small sticker sheet

Anti-Slip Table Pad 100x63cm

Anti-Slip Table Pad 51x41cm

One unique product, 3 different uses. - car stand for any 1/8 scale buggy & truggy model - shock station for maintenance - fuel gun vertical support during the race Features: - made with strong and durable plastic material - high quality laser cut holes and shape - side logo and upper sigles laser engraved - 4mm thickness - size 24,5x15x9,1cm - protective shaped foams...

Show your number one car on display! Made for 1:10 touring / offroad cars - adjustable in many ways.

Suitable for 1/10 and 1/8 cars.

Features 4 part cavities 8 shock absorber holder for shock shafts with different diameters soldering jigs for T-Plug, Corally Pro and XT-60 connectors soldering jig for BULLIT connectors from 3.5mm up to 7mm screw length measuring jig shock rebound measuring cavity shock cap screw tool Nine pictures show the tray in use to explain the different features. We'll only deliver...

Features 4 part cavities 8 shock absorber holder for shock shafts with different diameters soldering jigs for T-Plug, Corally Pro and XT-60 connectors soldering jig for BULLIT connectors from 3.5mm up to 7mm screw length measuring jig shock rebound measuring cavity shock cap screw tool Nine pictures show the tray in use to explain the different features. For these pictures...

Usefull pit mat, made of high durable material. It is made of 3mm thickness and easy to roll up. With the size of 900x600mm it will fit to nearly each car as pit mat.

With tool and screws compartments. X-Large 850 x 500mm premium quality Rubber Pit Mat with a thickness of 5.5mm Not just a Pit Mat Keep your work-bench clean, protect but also organised Assemble your cars using the right screws and tools

Original is always best - get HARM spares and optionals for your EGX-1!

Screw Tray Rubber 15x10cm 2 compartements: 1x ca. 9x8cm 1x ca. 7x5,3cm All parts and screws can be hold neatly in one place, very convenient during Disassamblement work. Or as a coffee tray. Delivery content: Screw tray as descripted, NO COOKIES! Other parts shown on the pictures serve as example of usage.

Keep your pit area at home or at the track tidy and clean with the HPI Racing Pit Mat! The Pit Mat is perfect for working on any RC vehicle. Separate parts areas let you organize any screws or washers you remove, allowing you to find them quickly and easily as you assemble your car or truck. The HPI Racing Pit Mat protects your table, desk or worktop from scratches, and...

Suitable for 1:12 / 1:10 / 1:8

Bearing Check Tool - 2-15mm

The HUDY Personal Racing Display is a compact all-in-one data center for professional RC car drivers, allowing you to record pertinent data for your set-up sheets. The display features large character and symbols for quick and easy readings. Aside from all of the data information, the built-in adjustable alarm clock can be used to notify you of your next heat or run. Powered...

HUDY PROFFESIONAL RACING STOPWATCH XL DISPLAY Premium-quality racing stopwatch with 300-lap memory with extra large XL display. This professional stopwatch with an accuracy of 0.01sec features large, easy-to-read 3-row display which is perfectly visible in all conditions both on indoor and outdoor, instantly shows split time, lap time, and total elapsed time as well as...

HUDY TOURING CAR STAND

1:10 Offroad Car Stand - Alu - black

HUDY OFF-ROAD & TRUGGY CAR STAND

160x98mm size - with different fields for small parts. Including holes for soldering 4mm and 5mm plugs. Including a tool for measuring the length of M3 screws. Including two 10mm holes for your gear diff.

215x50mm size - with different fields for small parts. Take care: Will be delivered without content.

215x100mm size - with different fields for small parts. Take care: Will be delivered without content.

Including holes for keeping your diffs when building them. Also an additional and removable holder for shocks is included. Will fit for 1/10 and 1/8 Onroad diffs and shocks. ONLY the tray with the shock holder. No diff or shock parts inlcuded.

Including holes for keeping your diffs when building them. Also an additional and removable holder for shocks is included. Will fit for 1/10 Offroad diffs and shocks. ONLY the tray with the shock holder. No diff or shock parts inlcuded.

Including holes for keeping your diffs when building them. Also an additional and removable holder for shocks is included. Will fit for 1/8 Offroad diffs and shocks (21.3mm hole diameter for the shocks). ONLY the tray with the shock holder. No diff or shock parts inlcuded.

Spare part for the HUDY small parts tray 109800 / 109801 / 109802

Spare part for the HUDY small parts tray 109800 / 109801 / 109802

Spare part for the HUDY small parts tray 109800 / 109801 / 109802

Professional, ultra-compact work tray for rebuilding diff. CNC-machined from one-piece aircraft aluminum. Extremely durable and wear resistant. Black coated. The parts tray features 3 compartments for front, center & rear diffs, which are laser-engraved with labels for easy identification. Machined holes fold the diff outdrives. Machined pockets feature super-thin walls for...

Professional, ultra-compact work tray for rebuilding diff. CNC-machined from one-piece aircraft aluminum. Extremely durable and wear resistant. Black coated. The parts tray features 3 compartments for front, center & rear diffs, which are laser-engraved with labels for easy identification. Machined holes fold the diff outdrives. Machined pockets feature super-thin walls for...

Spare part for the HUDY small parts tray 109800 / 109801 / 109802

Professional, ultra-compact work tray for accessories, Pit LED, and mobile phone. CNC-machined from 1-piece aircraft aluminum. Extremely durable and wear resistant. Black coated. The parts tray features 4 different compartments for accessories & hardware. Middle compartment fits perfectly to #107855 - HUDY Pit LED. Front adjustable bar holds your mobile phone. Machined...

Toolbase for 22 tools: 1x 22mm diameter 7x 18mm diameter 1x 16mm diameter 4x 14mm diameter 1x 12mm diameter 1x 10 mm diameter 1x 9mm diameter 3x 7mm diameter 3x 4mm diameter Total dimensions: 215x60x25mm

HUDY PIT FOAM

HUDY PIT MAT 750x1200MM The smell fades after a while. We recommend to unpack the mat after receiving it and let it "breath" for a week in the basement :-) .

HUDY EXCLUSIVE PIT Mat Thickness: 3mm

HUDY EXCLUSIVE PIT Mat Thickness: 3mm

Clean and professional work space anti-slip rubber backing Thick 2.5mm cloth material; a soft yet durable work surface Cloth top layer prevents parts from rolling Roll-able design for easy transportation and storage

Clean and professional work space anti-slip rubber backing Thick 2.5mm cloth material; a soft yet durable work surface Cloth top layer prevents parts from rolling Roll-able design for easy transportation and storage

HUDY EXCLUSIVE PIT TOWEL dimensions: length 1100mm width 700mm

Hiro Seiko 48003 - Alu Tray - 120x100x8.5mm - ORANGE

Hiro Seiko - Alu Tray - 120x100x8.5mm

For the use with 1:10 touring cars. Also suitable for 1:12 / 1:10 pan cars. Size: 165x90x30mm

Adopt high performance LED light and components, lighting more concentrated. High sensitivity touch panel, elegant control experience. Tube design, easy to get the best lighting angle. Low energy consumption design, saves up to 90% compared to incandescent lamps. Does not contain tungsten, mercury or other toxix material - environment friendly. Features: Lighting arm swing...

Magnetic Box - 70mm diameter. Will be delivered without content.

Featuring unique design and versatility along with premium build quality, the Deltagrid car stand is your ideal vehicle maintenance platform. It is compatible with almost all vehicles in the 10th to 8th scale range and the exclusive height adjustment feature gives you great flexibility if you want to change classes for the next weekend. Carbon fiber tubes and lever arms...

Featuring unique design and versatility along with premium build quality, the Deltagrid car stand is your ideal vehicle maintenance platform. It is compatible with almost all touring cars in the 10th to 8th scale range. Carbon fiber tubes combined with Deltagrid structured aluminium frames provide incredible strength and low weight, industrial rubber o-rings keep your...