The MB-01 Chassis The compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front- or rear- wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front-...

Will be offered as competition car kit. No body, no wheels, no electronical components.

190mm Touring Car Body Scale: 1:10 Width: 190mm Wheelbase: ca. 257mm The body will be delivered unpainted and uncut. Rear Wing, decal sticker (headlights, rear lights, grill) and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery.

The market for 1:12 foam tires is sometimes opaque and often only professionals can understand. What is missing is a cheap tire for hobby drivers. No dozens of variants. Not overly expensive. Still good and durable. Concentrate on the essentials and don't get carried away with possibilities. This is where we come in with our RCK foam tires for 1:12 PanCars! Two mixtures for...

The market for 1:12 foam tires is sometimes opaque and often only professionals can understand. What is missing is a cheap tire for hobby drivers. No dozens of variants. Not overly expensive. Still good and durable. Concentrate on the essentials and don't get carried away with possibilities. This is where we come in with our RCK foam tires for 1:12 PanCars! Two mixtures for...

The market for 1:12 foam tires is sometimes opaque and often only professionals can understand. What is missing is a cheap tire for hobby drivers. No dozens of variants. Not overly expensive. Still good and durable. Concentrate on the essentials and don't get carried away with possibilities. This is where we come in with our RCK foam tires for 1:12 PanCars! Two mixtures for...

The market for 1:12 foam tires is sometimes opaque and often only professionals can understand. What is missing is a cheap tire for hobby drivers. No dozens of variants. Not overly expensive. Still good and durable. Concentrate on the essentials and don't get carried away with possibilities. This is where we come in with our RCK foam tires for 1:12 PanCars! Two mixtures for...

Front tires: 63mm diameter 28mm width for bearings Rear tires: 63mm diameter 50mm width standard hub with 4 screws Will be sold as a set of two tires. Glued on grey star rims.

There are different versions of the SDS: SDS Mini: smaller tool, fixed rpm SDS Mini22: smaller tool, fixed rpm (600), high capacity battery SDS Pro: adjustable rpm, motion sensitive SDS ULTRA: adjustable rpm, up to 700 SDS Mini / Mini22 / Pro / ULTRA PLUS: same as before, including a benchtop drill press The set includes 10 drills - from 0.6 to 2.2mm.

Protoform 1720-00 - Pro-TW Rear Wing Set - 190mm (2pcs)

You're not looking wrong. So far, the 2002 was only available in M-chassis size - originally developed for the HPI Cup Racer. NOW it is also available in the correct 1:10 scale! Scale: 1/10 Wheelbase: approx. 257mm Width: approx. 200mm The body is very detailed and the scope of delivery is accordingly very large. In practice, this means that the body - if you build it as HPI...

Genuine Durango Spares & Optionals!

TR-12 Light Weight Clear Body The body will be delivered unpainted and uncut. Rear Wing, decal sticker and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery.

Genuine Durango Spares & Optionals!

Genuine Durango Spares & Optionals!

Genuine Durango Spares & Optionals!

Genuine XPRESS parts for your GripXero!

A new type of composite material, giving smoother action and prevents play for developing over a longer period of time! All plastics on the Execute XQ10 have been upgraded to this material! Keeping the flat shape design which allows you to run a taller camberlink position under the wheel without rubbing the wheel. 10634 - 10mm - for anti rollbar 10635 - 13mm - servo linkage...

The rubber band is pulled over the tire and presses the tire onto the rim with even pressure. This is particularly important for off-road tires - as it avoids a gap between the tire and the rim. Perfect for 1:10 off-road tires. These tires typically have a diameter of around 85mm. Because the rubber is stretchable, this diameter can vary both upwards and downwards. Using it...

Front tires: 45mm diameter 26mm width for bearings Rear tires: 46mm diameter 38mm width standard hub with 3 screws Which compound should I choose? Front: 30, 32, 35, 37 Shore: standard foam for indoor and outdoor use Hagberg: special foam which works on nearly any carpet just perfect Hagberg Red Dot: special foam, made for ETS carpet Rear: 30, 32, 35 Shore: standard foam for...

Front tires: 45mm diameter 26mm width for bearings Rear tires: 46mm diameter 38mm width standard hub with 3 screws Which compound should I choose? Front: 30, 32, 35, 37 Shore: standard foam for indoor and outdoor use Hagberg: special foam which works on nearly any carpet just perfect Hagberg Red Dot: special foam, made for ETS carpet Rear: 30, 32, 35 Shore: standard foam for...

Genuine Tamiya TRF spare parts & optionals.

To be used with the 1.2mm thin SCC lower deck only.

Special made Awesomatix screw.

Special made Awesomatix screw.

Special made Awesomatix screw.

Special made Awesomatix screw.

Special made Awesomatix screw.

Special made Awesomatix screw.

Special made Awesomatix screw.

Special made Awesomatix screw.

Made of 1.2mm hardened spring steel, the chassis combines previously unmatched lower center of gravity and excellent flex characteristics. Extensive refinement of the production process enabled the required chassis flatness and hardness to be achieved. The result is an incredibly long-lasting chassis that will outlast its carbon and aluminium counterparts due to being more...

Updated version of AM278 and direct replacement. Suitable for all A800R cars. Please note the installation info in the gallery. contains: 1pcs AM278-EVO 1pcs SS3X3

Suitabe for narrow Pro10 PanCars like XRAY X10, TOP Rebel 10, Serpent S100... 200mm width. Based on the popular Mon-tech M10 (same front end) the MF-10 has been modified for high-speed racing with a new rear-end. Scale: 1/10 Wheelbase: 257mm (+/-20mm cause there is no rear wheel arch visible) Width: 195mm front / 198mm rear (even if the manufacturer announces it as 200mm)...

Limited 2024 Edition! Available as BLUE, ORANGE or PINK Edition. Each limited to 720pcs worldwide - with an individual serial number. Alu steering wheel, alu DIAL, alu handle - in blue, orange or pink. Those parts are not available seperatly. We announce the number you will get - so it's not chosen by luck! Main features: · Ultra Response Mode (SUR) New Transmitter system...

Genuine Awesomatix part!

Designed for excellent servo protection but returns to center perfectly after impacts thanks to the heavy gauge steel springs and fiber reinforced nylon construction which also provides precise steering control. Designed with narrower ball end spacing for reduced ackerman in pan car type cars.

Genuine spare and option parts by Associated!

Genuine spare and option parts by Associated!

Genuine spare and option parts by Associated!

Genuine spare and option parts by Associated!

Genuine spare and option parts by Associated!

Genuine spare and option parts by Associated!

Genuine spare and option parts by Associated!

Genuine Team Associated parts - the best solution for your Asso car!

Genuine spare and option parts by Associated!

Genuine spare and option parts by Associated!

Genuine spare and option parts by Associated!

Genuine Team Associated parts - the best solution for your Asso car!

Genuine Team Associated parts - the best solution for your Asso car!

Genuine Team Associated parts - the best solution for your Asso car!

Genuine Team Associated parts - the best solution for your Asso car!

THE ULTIMATE TAMIYA TOOL! ;-) Will be delivered BULK - without any packaging.