Features: 32 bit processor Low resistance FET ESC system: brushless Forward/Brake/Reverse (Factory preset: Forward/Brake) Dimensions: 30,1 x 35 x 19,8 mm Weight: 43.3g excluding wires Voltage input: 6-9V Peak Current: 760A Continuous current: 160A Motor Limit: Over 3.5T Motor Type: Sensored 540 sized brushless motors BEC: 8A - 6V/7V Internal Capacitors Polarity Reverse...

Made from steel.

Made from steel.

Made from steel.

Metall sealed bearings for the GF-02. Includes 32 pieces of 1150 bearings (5x11x4mm)

59x 3x10mm Buttonhead 5x 3x12mm Buttonhead 2x 3x20mm Buttonhead 2x 3x25mm Buttonhead M3 ISO thread with 2mm hex

59x 3x10mm Buttonhead 5x 3x12mm Buttonhead 2x 3x20mm Buttonhead 2x 3x25mm Buttonhead M3 ISO thread with 2mm hex

59x 3x10mm Buttonhead 5x 3x12mm Buttonhead 2x 3x20mm Buttonhead 2x 3x25mm Buttonhead M3 ISO thread with 2mm hex

Genuine spare and option parts from ARC.

Genuine spare and option parts from ARC.

Genuine spare and option parts from ARC.

Genuine spare and option parts from ARC.

Genuine spare and option parts from ARC.

Genuine spare and option parts from ARC.

Genuine spare and option parts from ARC.

Genuine spare and option parts from ARC.

With the Modtreme 2, ORCA presents a completely newly developed series of brushless motors for the on and off-road modified classes. The CNC-machined motor housing has been equipped with several cooling openings to increase performance and reduce weight. A lot has also been done on the inside to be able to play at the front in the highly competitive modified classes. The...

With the Modtreme 2, ORCA presents a completely newly developed series of brushless motors for the on and off-road modified classes. The CNC-machined motor housing has been equipped with several cooling openings to increase performance and reduce weight. A lot has also been done on the inside to be able to play at the front in the highly competitive modified classes. The...

With the Modtreme 2, ORCA presents a completely newly developed series of brushless motors for the on and off-road modified classes. The CNC-machined motor housing has been equipped with several cooling openings to increase performance and reduce weight. A lot has also been done on the inside to be able to play at the front in the highly competitive modified classes. The...

With the Modtreme 2, ORCA presents a completely newly developed series of brushless motors for the on and off-road modified classes. The CNC-machined motor housing has been equipped with several cooling openings to increase performance and reduce weight. A lot has also been done on the inside to be able to play at the front in the highly competitive modified classes. The...

With the Modtreme 2, ORCA presents a completely newly developed series of brushless motors for the on and off-road modified classes. The CNC-machined motor housing has been equipped with several cooling openings to increase performance and reduce weight. A lot has also been done on the inside to be able to play at the front in the highly competitive modified classes. The...

ORCA presents the Blitreme 3, a completely newly developed series of brushless motors for on and off-road stock classes. The CNC-machined motor housing has been equipped with several cooling openings to increase performance and reduce weight. A lot has also been done on the inside to be able to play at the front in the highly competitive stock classes. The ORCA Blitreme 3 is...

With the Stock GT, ORCA has added an engine series for the stock classes with a prescribed engine or as a handout with fixed timing to the programme. Some racing series rely on engines with fixed timing to avoid letting technology decide the winner. It is important that the engines in the series do not scatter too much. This is precisely where ORCA wants to contribute its...

With the Stock GT, ORCA has added an engine series for the stock classes with a prescribed engine or as a handout with fixed timing to the programme. Some racing series rely on engines with fixed timing to avoid letting technology decide the winner. It is important that the engines in the series do not scatter too much. This is precisely where ORCA wants to contribute its...

With the Stock GT, ORCA has added an engine series for the stock classes with a prescribed engine or as a handout with fixed timing to the programme. Some racing series rely on engines with fixed timing to avoid letting technology decide the winner. It is important that the engines in the series do not scatter too much. This is precisely where ORCA wants to contribute its...

We add a ZooRacing BWOAH bodyshell to this kit and offer it for a really good price! What's the difference between the old kit 84409 and this one? It's only the number. The old kit has been a limited edition. Because of the high demand Tamiya decided to start another production of this kit. TT-02R Chassis Kit - 1/10 EP touring car kit Sold as kit. Without electronics. Wheels...

Scale: 1/12 PanCar Wheelbase: 198mm Width: 170mm Unpainted, not cut, including small decal sheet, wing and window masks.

It is a new rear steel chassis skid plates sets for the Mugen MBX8 buggy. The skid plates are machined from high-quality stainless steel for high corrosion resistance and protection of the rear parts of the chassis.

KEY FEATURES & Unique Mechanic Design & incredible efficiency and low power consumption & Standard dimension make it perfect for vehicles that can benefit from a high quality servo & CNC Machined aluminum case for exceptional cooling & HD 4096 Resolution & 2 μsec Dead Band & Superior Holding Torque PRODUCT SPECIFICATIONS Type: Digital Bearing: Dual Motor Type: Brushless Gear...

The WC Edition of our A12 FlexBumper is the final version of the test part that Max Mächler used in his IFMAR World Championship winning A12! With an increased width of 18mm and extended depth of 4mm we achieved a way better support for the bodyshells, which plays a key role when using the popular ultra-light versions. Actually this new style bumper takes over the role for...

Scale: 1/12 PanCar Wheelbase: 198mm Width: 170mm Unpainted, not cut, including small decal sheet, wing and window masks.

Features: High-performance HV Silicon Graphene cells Continuous current output of 75C, peak values up to 150C Ideal for 1:8 racing cars Specifications: Capacity: 5700mAh | 86.64Wh Rated voltage: 15.2V | 4S Discharge rate: 75C | 150C Cell type: Silicon Graphene Lithium Polymer Dimensions: 98.0mm x 47.0mm x 47.0mm Weight: 411g Connections: 5mm bullet plug, balancer plug XH...

Features: High-capacity 75C/150C cells for exceptional performance. Latest Silicon Graphene Lithium Polymer cells for improved internal resistance and higher power output. Low internal resistance for maximum power delivery. High capacity for longer run times. Lightweight construction. EFRA and BRCA approved Specifications: Capacity: 5200mAh Nominal voltage: 7.6V | 2S | LiHV...

Features: Made from high-quality 30C cells for optimal performance Designed for durability and robustness, ideal for beginners and bashers Attractively priced, offering high quality at an affordable cost point Pre-equipped with T-connectors for easy and quick connection Specifications: Capacity: 2000mAh Nominal Voltage: 7.4V / 2S Discharge Rate: 30C Cell Type:...

ALLEN WRENCH + REPL. TIP .050 x 120 MM

C204R-1 = fits front left and rear right C204L-1 = fits front right and rear left This set contains two of each - made for one car. It narrows the track width of the car and is especially recommended for lower grip levels. The arms have a "-1" engraved on the lower side for easy identification.

C204R-1 = fits front left and rear right C204L-1 = fits front right and rear left It narrows the track width of the car and is especially recommended for lower grip levels. The arms have a "-1" engraved on the lower side for easy identification.

C204R-1 = fits front left and rear right C204L-1 = fits front right and rear left It narrows the track width of the car and is especially recommended for lower grip levels. The arms have a "-1" engraved on the lower side for easy identification.

CNC Machined Steel Screws. Perfect length for a clean look when screwing together C04/C204 and P04.

Replaces P138 and P138-1. More precise. Narrow profile For A800 / A800X / A800MMX / A800R / A800FX Gear Diff. INFO: Doesn't fit for AT03B-X Spool!

Optional Linear Spring Screw for AT119 Progressive Spring Screw Holder with 0% progression. This "R" version features a 0,8mm extended shaft and thread.

Optional progressive Spring Screw for AT119 Progressive Spring Screw Holder with 25% progression. This "R" version features a 0,8mm extended shaft and thread.

The alloy case isn't just an optical highlight, it also increases the durability of the fan. The fan spins at 29,000 RPM at 8.4V and features a dual ball bearing design. A fan is meant to be a wearing part and is not build for a long lifetime. Due to mechanical damages, burned electronics, missing grease or due to bumps, the fan can wear of with time. In a RC Car a fan can...

The alloy case isn't just an optical highlight, it also increases the durability of the fan. The fan spins at 25,000 RPM at 8.4V and features a dual ball bearing design. A fan is meant to be a wearing part and is not build for a long lifetime. Due to mechanical damages, burned electronics, missing grease or due to bumps, the fan can wear of with time. In a RC Car a fan can...

The alloy case isn't just an optical highlight, it also increases the durability of the fan. The fan spins at 25,000 RPM at 8.4V and features a dual ball bearing design. A fan is meant to be a wearing part and is not build for a long lifetime. Due to mechanical damages, burned electronics, missing grease or due to bumps, the fan can wear of with time. In a RC Car a fan can...

The alloy case isn't just an optical highlight, it also increases the durability of the fan. The fan spins at 29,000 RPM at 8.4V and features a dual ball bearing design. A fan is meant to be a wearing part and is not build for a long lifetime. Due to mechanical damages, burned electronics, missing grease or due to bumps, the fan can wear of with time. In a RC Car a fan can...

Spacers spare part set for the A12 WC Edition FlexBumper. MAX-09-018 contains: 1x 1.0mm Spacer for A12 WC Edition FlexBumper 1x 1.5mm Spacer for A12 WC Edition FlexBumper 1x 2.0mm Spacer for A12 WC Edition FlexBumper Sidenote: Don't forget, this product is made by a 3D printer. It means you are able to see layers and lines from the material! We strive for the best quality...

SAVÖX SV-1257MG Abmessungen (size): 35.0 x 15.0 x 29.2mm Betriebsspannung (operating voltage): 4.8 - 8.4 Volt Stellzeit (manipulating speed): 0.055sec @ 7.4V (60°) Stellkraft (manipulating energy): 4.0kg @ 7.4V Kugellager (ball bearing): 2x Servogetriebe (gear): Metall (metal) Servogehäuse (case material): teilweise Alu (partly aluminium) Gewicht (weight): 29g Zähnezahl...

For 3.175mm shaft diameter.

The servo arm plays an important role of the overall handling and feeling of your steering inputs. Strength of the material and even more the height from the ball stud to the servo spline are key points for the best performance. We created the MXLR Adjustable Alloy Servo Arm to offer you a strong and reliable height adjustable servo arm which stands the highest competition...

1:10 Body - 190mm Wheelbase: ca. 257mm TAKE CARE! This bodyshell needs a modern car with very low shock towers. Mon-Techn announces this body as also suitable for 1/10 formula chassis. The body will be delivered unpainted and uncut. Rear Wing, decal sticker and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to...

Features: 200W DC charging power 60W AC charging power 19W discharge power Pocket format Compatible with SkyCharger App and Charger Master Technical Specifications: Input Voltage DC: 10-30V Input Voltage AC: 100-240V Charge Power: DC: 200W / AC: 60W Discharge Power: max. 19W (6S, 4.2V/S) Charge Current: 0.2-10.0A Discharge Current: 0.1-2.0A Balance current: max. 500mA Cells...

Genuine spare and option parts from Serpent.

Genuine spare and option parts from Serpent.

Genuine spare and option parts from Serpent.

Genuine spare and option parts from Serpent.

Genuine spare and option parts from Serpent.

Genuine spare and option parts from Serpent.

Genuine spare and option parts from Serpent.

Genuine spare and option parts from Serpent.