XB2 Front Suspension Pivot Pin (2 pieces)

XB2 Pivot Pin front (2 pieces)

XB2 High Speed Bearing Set (24 pieces)

XB2 Mounting Hardware Set

2WD Offroad Buggy Karosserie Gamma 2C - Carpet The body is clear and unpainted.

2WD Front Wheel - white - 12mm hex 24.5mm width

2WD Front Wheel - white - 12mm hex 24.5mm width

2WD Front Wheel - 12mm hex 24.5mm width

Specially-designed 2WD/4WD rear wheels with 12mm internal hex. The center countersunk area was redesigned to place the wheel nut deeper. Precision fit, perfect for high-competition racing. Made from flexible, durable material to withstand impacts. The side of the wheel is aerodynamic for maximum performance. Offical replacement for XRAY 369913

Specially-designed 2WD/4WD rear wheels with 12mm internal hex. The center countersunk area was redesigned to place the wheel nut deeper. Precision fit, perfect for high-competition racing. Made from flexible, durable material to withstand impacts. The side of the wheel is aerodynamic for maximum performance.

COMPOSITE STEERING SERVO ARMS - SET

Clutch Bell Ball-Bearing MR105ZZ 5x10x4 (2)

BODY MOUNT, BATTERY MOUNT & WING SHIM (2)

ALU CONICAL SHIM 3x6x2.0MM (10)

STEEL STEERING BUSHING - SHORT (2)

STEEL STEERING BUSHING - LONG (2)

ECCENTRIC BUSHING SET (2)

Open Eccentric Bushing Set (2 sets containing 3 pieces)

BALL END 4.9MM WITH THREAD 5MM (2)

BALL END 4.9MM WITH THREAD 6MM (2) XRAY 302653 has been replaced by this item.

BALL END 4.9MM WITH THREAD 8MM (2) Replacement for XRAY 302654

BALL END 4.9MM WITH THREAD 10MM (2)

Rear lower suspension arms made from specially-formulated composite mixture, perfect for high-traction conditions. The arms make the car more stable and increase cornering speed. Intelligent arm design allows for variable positioning of the rear shocks. Depending on track conditions, the rear shocks can be installed either in front of or behind the rear shock tower, and the...

Genuine spare and option parts by XRAY!

Rear lower suspension arms made from specially-formulated composite mixture, perfect for high-traction conditions. The arms make the car more stable and increase cornering speed. Intelligent arm design allows for variable positioning of the rear shocks. Depending on track conditions, the rear shocks can be installed either in front of or behind the rear shock tower, and the...

BALL UNIVERSAL 5.8MM WITH BACKSTOP (2)

High-precision eccentric 5.8mm pivot ball allows to mount the shocks in a different angle. Set of 2. Can be used as following: XB2 – in front and rear XB4 – in rear XT2 – in rear XT4 – in front and rear

REAR WING POST (2) - V2

Slipper Clutch Pad SLS (2) Official replacement for 364130

3-Pad Slipper Clutch Plate - Alu

SLIPPER CLUTCH SPRING C=30 - BLACK

XB4 Alu Wheel Hub 12mm (2)

XB4 Alu Wheel Hub 12mm - Offset +4.5mm (2)

Composite Servo Mount - Higher

SUSPENSION PIVOT PIN (2)

Shock Pistons Set POM Updated V2 from the 2018 cars. Slighty modified for a better fit.

ALU SHOCK ADJUSTABLE NUT (2)

Composite Shock Bushing & Shim (2+2)

STEEL SCREW SHOCK PIVOT BALL WITH HEX (2)

ALU FRONT SHOCK BODY - HARD COATED (2) What's the difference between V1 and V2? Only the color. V1 = black V2 = olive-grey

ALU LOWER SHOCK BODY CAP (2)

FRONT HARDENED SHOCK SHAFT (2)

XB2 Springs Front - 1 Point (2)

Front Spring Set L=42mm 2 Dots (2 pieces)

REAR SHOCK ABSORBERS COMPLETE SET (2)

ALU REAR SHOCK BODY - HARD COATED (2)

REAR HARDENED SHOCK SHAFT (2)

Rear Spring Set L=57mm 2 Dots (2 pieces)

BALL UNIVERSAL 4.9 MM - HUDY SPRING STEEL (2)

Set of black&white transparent stickers for your body. Fits any body and can be used for tool box as well. Available in several colors. 240x208mm precut decal