VTD Spare Part

Rear Axle x 2

Ball Stud x 8

ST05-R adds "friction type" damping into the suspension operation. ST05-R slides along ST102 with noticeable friction at suspension travel. Friction damping feature: more compression of suspension = more damping, even at low speed of suspension. Oil damping feature: more speed of suspension travel = more damping. Small damping at low speed of suspension. With ST05-R the car...

Genuine Awesomatix spare parts!

Genuine Awesomatix spare parts!

A800 Round Weight 5g

A800 Round Weight 10g

Genuine Awesomatix spare parts! Will be used to mount and center bulkheads and dampers.

Replacement parts for IFJ. Content of delivery: ONE piece.

Spare part for the IRJ.

Replacement parts for IFJ. Content of delivery: ONE piece.

ST118L-1 SB Bellcrank Axle for A800MMX Single Bellcrank Steering (SB1) with AM180M5 Bellcrank. Also suitable for AM180 in combination with 1pcs SH5X7X0.1 shim.

Genuine Awesomatix spare parts! Will be used to mount the damper case parts AM240 and AM242.

Optional ST122-1 Damper screws with OR2005V O-Rings. Benefits of this set are: - ST122-1 doesn't need much tightening for good sealing. The thread in damper case will last longer. - ST122-1 keeps better sealing at big expansion of the damper case in hot conditions. Will be used to mount the damper case parts AM240 and AM242.

CNC Machined Steel Screws. Perfect length for a clean look when screwing together C04/C204 and P04.

Spare part for FBS

Spare part for FBS

Genuine Awesomatix spare parts! The o-rings are included and pre-installed. If you need to replace them use OR1010V.

Spare part for APS when it's used in A800R.

U-Joint Cross x 2

Universal Ring

Universal Ring Set (2+1)

Universal Ring

Extra strong steel ring set for Awesomatix double universal joints. Especially recommended for racing at tracks with hard boards. Features: 1. Easy assembling. Screw ST38-US Universal Nuts onto ST17-1US Universal Ring at the final stage of assembling. 2. Reduced backlash with improved concentricity and precision. 3. Improved strength and rigidity for racing at tracks with...

Genuine Awesomatix spare parts! Bearings are included. The part is pre-mounted as shown. It's not possible to replace the bearings by yourself.

Spare part for the IRJ.

4.8mm Ball Stud x 4

Spare part for FBS

4.8mm Ball Stud, 10mm x 4

Awesomatix A700-ST24M - 4.8mm Ball Stud, 8mm long (4 pieces)

Output Axle x 2, for use with P46 sealing

Replacement parts for IFJ. Content of delivery: ONE piece. ST37X IFJ outdrives are suitable for our normal dogbones also.

Universal Nut x 2

Universal Nut x 2

Spare Parts for LS2

Standard M4 nuts.

Optional Linear Spring Screw for AT119 Progressive Spring Screw Holder with 0% progression.

Optional Linear Spring Screw for AT119 Progressive Spring Screw Holder with 0% progression. This "R" version features a 0,8mm extended shaft and thread.

Replacement part for PSS.

Replacement part for PSS.

Optional progressive Spring Screw for AT119 Progressive Spring Screw Holder with 25% progression. This "R" version features a 0,8mm extended shaft and thread.

Genuine Awesomatix spare parts!

Genuine Awesomatix spare parts!

Genuine Awesomatix spare parts!

Genuine Awesomatix spare parts!

Genuine Awesomatix spare parts!

5,5mm/6,5mm/7,0mm wrench which is made from high grade stainless steel with laser engraved logo. Highly recommended for the FBS (Flexible Ball Stud) assembly as well as for AT21/AT21ST-A installation on the chassis.

Washer 3.5x9.5x0.2 x 4

Washer 5x15.5x0.3 x 2

The servo arm plays an important role of the overall handling and feeling of your steering inputs. Strength of the material and even more the height from the ball stud to the servo spline are key points for the best performance. We created the MXLR Adjustable Alloy Servo Arm to offer you a strong and reliable height adjustable servo arm which stands the highest competition...

The servo arm plays an important role of the overall handling and feeling of your steering inputs. Strength of the material and even more the height from the ball stud to the servo spline are key points for the best performance. We created the MXLR Adjustable Alloy Servo Arm to offer you a strong and reliable height adjustable servo arm which stands the highest competition...

The MXLR FlexBumper is 3D printed with thermoplastic polyurethane for the optimal strength and flexibility! You may ask what are the advantages over foam bumpers? We can answer that: - absorbs hits better and doesn't transfer them as much into the chassis structure - more robust and sturdy - it always goes back to original shape and don't drag on the floor after a crash -...

The MXLR FlexBumper is 3D printed with thermoplastic polyurethane for the optimal strength and flexibility! You may ask what are the advantages over foam bumpers? We can answer that: - absorbs hits better and doesn't transfer them as much into the chassis structure - more robust and sturdy - it always goes back to original shape and don't drag on the floor after a crash -...

With the trend of feather light bodyshells and even higher top speeds, deflection of bodyshells became an issue for serious racers! The solution is our MXLR Front Body Support for the Awesomatix A800R which: - prevents deflection of the bodyshell under higher speeds - reduces the risk of cracking the front wheel arches of the bodyshell The result is an extended lifetime of...