This set includes: 1x Tamiya 1825148 - Porsche 911 GT2 993 body sheel (without accesoires, not cut, not painted, pre-drilled for TA-02SW) 1x Tamiya 9004371 - Porsche 911 GT2 993 rear wing set (white abs plastic, rear wing and mirrors) 1x RCK Decal IMPORTANT: There are NO window masks, screws, o-rings, washers or body clips included. The decal set is made by RCK. It's NO...

2S 7.4V Hardcase LiPo Battery - 3400mAh 40C

The Arrow series takes the best from the Execute series of touring cars and incorporates it in a shaft driven system. Sporting floating gearboxes to include more chassis flex. Specially designed motor mount makes adjusting gear mesh a breeze. Also bringing various modern designs that brings this car fit for racing straight from the box, Sport version of the car whilst...

Will fit only to Protofom VTA Vintage Tires or HPI Retro Tires! Will NOT fit to standard touring car tires!

30x30x10mm fan 6-8.4V DC input 22.000 - 24.000 rpm with ball bearings wire already soldered to the fan by using external tabs

40x40x10mm fan 6-8.4V DC input 14.000 - 15.000 rpm wire already soldered to the fan by using external tabs with ball bearings

40x40x10mm fan 6-8.4V DC input 14.000 - 15.000 rpm wire already soldered to the fan by using internal tabs with ball bearings

VINTAGE TA2 WHEEL 26mm BLACK (0mm OFFSET) (2 pcs)

Bittydesign offers now also a GT body for touring cars - with the perfect look! Scale: 1/10 Width: 190mm Wheelbase: 257mm Body is unpainted and not cut. ONLY the body - not a complete car. Small decal sheet (headlights, grill), windows masks and wing included.

Bittydesign offers now also a GT body for touring cars - with the perfect look! Scale: 1/10 Width: 190mm Wheelbase: 257mm Body is unpainted and not cut. ONLY the body - not a complete car. Small decal sheet (headlights, grill), windows masks and wing included.

The TT-02 Type-SRX chassis kit is an upgraded version of the TT-02 Type-S Series with enhanced durability and performance for racing. This chassis kit uses Items 22049 and 22047 with updated parts. Also, parts included in this chassis kit were chosen for users who want to learn setup before levelling up to mid-level Tamiya chassis kits. (More cost-effective than buying each...

As a professional racer you should always check and know the conditions of your bearings. You want to be the fastest guy on track? Don't forget your bearings - it's one of the keys to a successful dack at the track! BASEIQ bearings are made of high qualitiy steel - already pre-oiled with a low friction oil. Both sides are covers with a rubber sealing to protect your bearing....

As a professional racer you should always check and know the conditions of your bearings. You want to be the fastest guy on track? Don't forget your bearings - it's one of the keys to a successful dack at the track! BASEIQ bearings are made of high qualitiy steel - already pre-oiled with a low friction oil. Both sides are covers with a rubber sealing to protect your bearing....

VINTAGE 5 SPOKE WHEEL 26mm BLACK (0mm OFFSET)

Original spare and optional parts!

Original spare and optional parts!

VINTAGE TA2 WHEEL 31mm BLACK (6mm OFFSET)

Suitable for the XQ, XM, FM, AT and FT cars. And of course many other brands - like XRAY, Awesomatix, Serpent...!

Porsche 911 GT1 1996 Street CAUTION! Only 237mm Wheelbase! Not painted, not cut. Only the body. No wheels, no chassis, no decals, no wing! Already pre-drilled for TA-03RS. Will be delivered BULK, without box or bag.

TT-01E Chassis Kit - 1/10 EP touring car kit Sold as kit. Body, Tires, ESC and Motor included. Not painted! Servo (which is shown on one picture) is NOT included.

194mm 1/10 GT polycarbonate clear body and wing set. Exotek is excited to bring you the TYPE A , our 'retro' new contender for the highly competitive USGT / GT classes! A true classic style body we all miss, born from the days of JGTC and Gran Turismo but updated to compete on todays race circuits. Designed with an aggressive splitter, muscular fenders, low slung hood,...

Genuine Tamiya spares - maybe the best solution for your car!

Waterproof! Brushed only. 70A cont. current 2-3S LiPo 6V @ 3A BEC

Suitable for 1:10 touring 12mm hex 26mm width +6mm Offset Set of two pieces.

TAKE CARE! It's NOT a complete rim. You will need 19335704 and screws to complete it.

TAKE CARE! It's NOT a complete rim. You will need 19335704 and screws to complete it.

Suitable for 1:10 touring 12mm hex 26mm width 2mm Offset Set of two pieces.

For 3.175mm shaft diameter.

What's the difference between the old kit 84409 and this one? It's only the number. The old kit has been a limited edition. Because of the high demand Tamiya decided to start another production of this kit. TT-02R Chassis Kit - 1/10 EP touring car kit Sold as kit. Without body, without electronics. Wheels are included.

Suitable for 1:10 touring 64mm outer diameter 47mm inner diameter 26mm width Set of two pieces.

Suitable for 1:10 touring 64mm outer diameter 47mm inner diameter 30mm width Set of two pieces with inserts.

Suitable for 1:10 touring 12mm hex 26mm width Set of two pieces.

Genuine Tamiya spares!

Genuine Tamiya spares - maybe the best solution for your car!

Genuine Tamiya parts for your Tamiya car!

Suitable for 1:10 touring 26mm width Set of four pieces.

Genuine Tamiya optionals!

Suitable for 1:10 touring 12mm hex 26mm width Set of four pieces.

Genuine Tamiya spares!

Genuine Tamiya Spare Parts.

BittyDesign offers now also a GT body for touring cars - with the perfect look! Scale: 1/10 Width: 190mm Wheelbase: 257mm Body is unpainted and not cut. ONLY the body - not a complete car. Small decal sheet (headlights, grill), windows masks and wing included.

BittyDesign offers now also a GT body for touring cars - with the perfect look! Scale: 1/10 Width: 190mm Wheelbase: 257mm Body is unpainted and not cut. ONLY the body - not a complete car. Small decal sheet (headlights, grill), windows masks and wing included.

BittyDesign offers now also a GT body for touring cars - with the perfect look! Scale: 1/10 Width: 190mm Wheelbase: 257mm Body is unpainted and not cut. ONLY the body - not a complete car. Small decal sheet (headlights, grill), windows masks and wing included.

Ultra Bearing Set for Tamiya TA-02 (22 pcs) The Set contains: 6 pieces 5x8mm Ball bearing 12 pieces 5x11mm Ball bearing 2 pieces 6x12mm Ball bearing 2 pieces 10x15mm Ball bearing The Ball bearings all have one steal sealed and one rubber sealed side. The rubber sealed side is used for maximum protection from dust and dirt. The steal sealed side is used for maximum...

Ruddog Products 50C LiPo Battery Style: Stick Voltage: 7.4V Capacity: 4000 mAh Constant C Rate: 50C Max Charge C Rate: 2C Length: 133,5mm Width: 45,9mm Height: 23.25mm Weight: about 220g Power Connector: T-Plug Balance Connector: XH

190mm 1/10 GT polycarbonate body and wing set. Exotek is excited to bring you our bold new contender for the highly competitive USGT / GT classes! Designed for domination with an aggressive splitter, muscular fenders, low slung hood, downforce inducing side skirts and a sports car cockpit for the most aggressive aero package with minimal drag. The body has 2 trim lines...

Designed for domination with an aggressive splitter, muscular fenders, low slung hood, downforce inducing side skirts and a sports car cockpit for the most aggressive aero package with minimal drag. The body has 2 trim lines marked on the bottom: 1 for low profile shock towers and the 2nd mark for extra low body mounting on cars such as the A800X. The wing has 2 trim lines:...

WP 1060 - Brushed ESC - 60A Especially made for using two motors! Waterproof! Brushed only. 60A cont. current 2-3S LiPo 6V @ 3A BEC

Teeth: 19 Pitch: Module M0.6 Motor Shaft Diameter: 3.17mm Teeth Width: 4 mm Gear Length: 9 mm Fixing Screw: M3 locking screw (included) Material: Hardened Steel

Steel pinion for 1:10 motor with 3.17mm shaft diameter

Corally 30C LiPo Battery Style: Stick Voltage: 7.4V Capacity: 4000 mAh Constant C Rate: 30C Max Charge C Rate: 2C Length: 134mm Width: 46mm Height: 23.5mm Weight: about 215g Power Connector: T-Plug Balance Connector: EH

Teeth: 14 Pitch: Module M0.6 Motor Shaft Diameter: 3.17mm Teeth Width: 4 mm Gear Length: 9 mm Fixing Screw: M3 locking screw (included) Material: Hardened Steel

Suitable for cars with 3 and also 4 screws in the spur gear. XRAY T4, Awesomatix A800X, Yokomo BD8, Tamiya TRF419X and many more. The picture shows just a sample size. V2 is made of a HARD composite material. You can regonize the H on one side.

Wheel Hex x 2

1966 FORD MUSTANG GT COUPE BODY (200mm) The body will be delivered unpainted and uncut. Rear Wing, decal sticker and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery. Take Care: HPI bodies will show sometimes a slighty sign of dirt during the production process. This may happen and is...

Scale: 1/10 Wheelbase: 257mm Width: 200mm The body will be delivered unpainted and uncut. Rear Wing, decal sticker and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery. Take Care: HPI bodies will show sometimes a slighty sign of dirt during the production process. This may happen and is...

1/10Touring Car Size 200mm/Use offset wheels for 190mm width chassis General Motors Trademarks used under license to HPI. One of the original muscle cars, the Pontiac Firebird had a long and storied history, with its popularity peaking in the late 70's after the release of a certain Hollywood movie featuring the original of this car, the hugely successful black ‘Bandit'...

1969 Ford Mustang RTR-X BODY (200mm) The body will be delivered unpainted and uncut. Rear Wing, decal sticker and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery. Take Care: HPI bodies will show sometimes a slighty sign of dirt during the production process. This may happen and is part...

TAKE CARE! The complete batch of this body is having a problem. Small parts of dust between the mould and the polycarbonate deformed the body shell. There are dozends of small bubbles inside the body. There exists no different version of this body. "Take it or leave it", "It's not a bug, it's a feature". 1968 CHEVROLET® CAMARO BODY (200mm/210mm) The body will be delivered...

Will fit only to Protofom VTA Vintage Tires or HPI Retro Tires! Will NOT fit to standard touring car tires!