Will fit to any TA-02. Modification might be necessary.

Liquid Mask - Medium - 40ml

LED Light Set with Controller Box - 6 LED´s

The wing position greatly affects the handling of your car. It's a powerful setup option to adjust your car to certain grip conditions and track layouts. Mounting the wing correctly and especially straight isn't as easy, but very important! Our CNC cutted Precision Carbon Wing Mount plates are sturdy and lightweight to keep the CG of your bodyshell as low as possible. The...

It's important to keep the weight and by this the center of gravity as low as possible to achieve the best performance. As the wing mounts are naturally placed on a high position of the bodyshell, every gram of weight you save in this place is a performance gain. Our LW Wing Bolts are made of PA plastic in white/cream color. The material has great properties such as strength...

Super thin and lightweight body shells are a trend since long time, as they drastically improve the handling. But there is also a downside with this flimsy Polycarbonate shells --> They deform under high speed or windy conditions, and the risk of a so called "Body Tuck" during intense racing action is just huge! There were several attempts to fix the issue with 3D printed or...

Simple yet effective tool for marking wheel wells for easy cutting out, besides wheel wells you can also mark the height of how far it is off the ground. Which is sometimes required sometimes racing on carpet tracks and to avoid your body scraping on the floor and affecting performance! Besides for touring cars, there is an marked section in the center for marking mini...

Body Clips 1:10

Car Condom Fits all classic touring cars 1/10 up to 200mm width. Does not fit trucks or estate.

Original PSM tuning parts for your RC-Car.

Pre-Cut TC Wing Endplates for Touringcar 190mm (10pcs) This is a pack of 10 conveniently pre-cut end plates for 190mm touring car wings. Die-cut to IFMAR specs of 40mm x 20mm, these end plates make easy replacements for lost or damaged end plates. Add these to your TC wing with a high-strength double-sided tape of your choice (not included) for increased stability at...

Crosshair Body Mounting Kit - suitable for 6mm body posts. Please note! The magnets are made from neodymium which makes them extremly magnetic. This is necessary for the little magnets so they can hold a body in position. A second feature of neodymium is, it is extremly brittle. The magnets are very strong and it only takes to magnets to connect in an akward way to let them...

This set of Body Support Foam is used to eliminate the gap between your car’s foam bumper and the inside of your race body. Keeping the front of your race body supported is extremely important for both increasing durability and keeping the aerodynamic integrity of the body intact. By using the Body Support Foam, you can eliminate the unwanted “play” that allows the body to...

Protoform 1:10 & 1:12 Onroad Car Bag - Gym Bag - Gray

Cuts circles from 10mm to 150mm diameter.

Replacement blades for our compass cutter. Set of 5 - need to be separated with pliers.

Robitronic R06206 - body scissor - straight

45° bent Colour: silver Length: ca. 120mm perfect size vor 1/10 touring.

Protection and Heat Shield Tape - 2mx50mm

Medium Sandpaper for Sander - 20mm Contents: 3x Medium Sandpaper (P240)

Fine Sandpaper for Sander - 20mm Contents: 3x Fine Sandpaper (P320)

Suitable for 1:10 touring cars - 69mm inner diameter.

Alu Shims for Rear Wing (2pcs) - suitable for M3 countersunk screw (not included)

Body Clips blue short

Body Clips purple short

Body Clips red short

Body Clips blue short

Body Clips purple short

Body Clips red short

Body Clips silver short

Body Clips light blue short

Colour: blue Length: 93mm

Colour: purple Length: 93mm

Colour: red Length: 93mm

Colour: light blue Length: 93mm

Colour: blue Length: 110mm

Colour: purple Length: 110mm

Colour: red Length: 110mm

Colour: light blue Length: 110mm

Colour: blue Length: 110mm

Colour: purple Length: 110mm

Colour: light blue Length: 110mm

Length: 25mm fits 7mm diameter body posts

Length: 25mm fits 7mm diameter body posts

Length: 25mm fits 7mm diameter body posts

Length: 25mm fits 7mm diameter body posts

Length: 25mm fits 7mm diameter body posts

4x Body Clip silver 2x 60mm wire black

4x Body Clip silver 2x 60mm wire dark blue

4x Body Clip silver 2x 60mm wire red

4x Body Clip silver 2x 60mm wire silver

4x Body Clip silver 2x 60mm wire light blue

4x Body Clip silver 2x 80mm wire silver

4x Body Clip silver 2x 80mm wire light blue

These carbon fiber body hole protectors feature an adhesive backing and 6mm hole that fits the A12 and most TC’s. SuperLite!

10mm width 120cm in total (8x10cm + 8x5cm pieces) 2.0mm thickness sticky

Secure your rear wing in a save position!

It's new body protector sets for 1/8th, 1/10th and 1/12th scale vehicles. The 1/10th and 1/12th scale sets include both wheel well and body post protectors that can be used either to reinforce a new or repair an already damaged body shell. The 1/10th set is usable for most touring car body shells and includes a pair of sheets with two wheel well and four body post stickers...

It's new body protector sets for 1/8th, 1/10th and 1/12th scale vehicles. The 1/10th and 1/12th scale sets include both wheel well and body post protectors that can be used either to reinforce a new or repair an already damaged body shell. The 1/10th set is usable for most touring car body shells and includes a pair of sheets with two wheel well and four body post stickers...

It's new body protector sets for 1/8th, 1/10th and 1/12th scale vehicles. The 1/10th and 1/12th scale sets include both wheel well and body post protectors that can be used either to reinforce a new or repair an already damaged body shell. The 1/10th set is usable for most touring car body shells and includes a pair of sheets with two wheel well and four body post stickers...