Black golden Design.

Black golden Design.

Black golden Design.

All the tools you would ever need at a track day whilst either racing 1/10 touring cars or drifting! Even comes with Lipo bags for when you charge lipo batteries and a body opener for when you want to mount a new body. Feature: For: Car maintenance Include: YT-0187(1 pc) include -1.5mm Hex Wrench (1 pc) -2.0mm Hex Wrench (1 pc) -2.5mm Hex Wrench (1 pc) -3.0mm Hex Wrench (1...

Drill bits for installing into a handheld drill or a dremel for use to either modify shock pistons or places where small holes are needed! Color coded with corresponding sizes for easy management. Comes with 10pcs, increasing in 0.1mm increments ranging from 1.1 to 2mm. Feature: For: 4mm / 4.8mm / 5mm / 6mm Ball End Material: Aluminum Color: Black

Simple yet effective tool for marking wheel wells for easy cutting out, besides wheel wells you can also mark the height of how far it is off the ground. Which is sometimes required sometimes racing on carpet tracks and to avoid your body scraping on the floor and affecting performance! Besides for touring cars, there is an marked section in the center for marking mini...

Simple yet effective tool for marking wheel wells for easy cutting out, besides wheel wells you can also mark the height of how far it is off the ground. Which is sometimes required sometimes racing on carpet tracks and to avoid your body scraping on the floor and affecting performance!

Easily mark the wheel well on your 1/8 GT and 1/8 on-road race cars! The smallest marking is designed for the front tire (68mm), the 76mm for the rear tires. The outermost 105mm marking is designed for 1/8 GT cars!

Body Post Trimmer - Multitool Never have rough looking cut body posts again with this body post cutter! Loosen the knob at the end and make sure the little ball is backed off as well then insert your knife and start tightening the knob! In no time you will have very clean cut body posts on your car! The fun doesn't end there, there's also a bevel cut function which makes...

Multi sized hex driver containing 4 hex tips from 1.5mm to 3.0mm in 0.5mm increments. The hex tips are stored inside the handle cap, for easy tip management and storage so that there is a less chance for losing them. Magnetised tips for easy screw pickup. The bits are having the same size (6.35mm) as most of such bits are having.

Toolset including all the tools that you would require to rebuild your entire car! Comes in a neat carrying pouch for you to bring to the track easily and prevent your tools from getting scratched or scratching other things! 3.5mm Nut driver (1 pc) 4mm Nut driver (1 pc) 4.5mm Nut driver (1 pc) #00 Philips screwdriver (1 pc) #0 Philips screwdriver (1 pc) #1 Philips...

Black golden Design. Spare tips can be used from HUDY or Arrowmax as well.

For the use with 1:10 touring cars. Accurately measure the downstop across all your cars with this downstop gauge which allows you to measure your axle height from the bottom of your chassis! If that is not to your liking, the traditional height from the bottom of the arm can still be measured with the measurements on the gauge paired with traditional 10mm droop blocks....

Accurately check if your 1/8 Onroad car has any form of tweak with this set of bearing supported weighted setup wheels! Place your car on a flat surface and have the weights spun on their side. Slowly lift your chassis and if a side rotates first, means that corresponding side is tweaked. Adjust your spring preload accordingly.

Neatly sort your pit space with this tool stand with three separate compartments to store small parts such as screws and bodyclips! 12.5x9x1.8cm 190g weight Hole diameter: 18.2mm - 10 pcs

Neatly sort your pit space with this tool stand with three separate compartments to store small parts such as screws and bodyclips! 12.5x9x1.8cm 190g weight Hole diameter: 18.2mm - 10 pcs Including 10 tools with alu handle!

Slim profile screw and parts tray for you to organise your pit table. Magnetic slot at the very bottom to prevent those extra small parts from going missing! 18x4.2x0.6cm 49 g weight