Genuine XRAY parts!

Lightweight composite mud guard for rear suspension arms protects the rear drivetrain in wet & dirty track conditions. Set of L+R. Fits both longer and shorter rear suspension arms on XB8 (2014 and later), XB808, XB9 and GTX cars.

Graphite Braces for rear Composite Brace Set PLEASE TAKE CARE: This stiffener will not fit into your GTXE 2022 - even if your manual tells you that it will work. You will need 353280 instead of 353281!

The rear uprights were redesigned and feature larger outside 8x16x5mm ball-bearings for increased reliability and life-span. To extend the set-up alternatives, an additional lower roll-center adjustment position was added. The smart design allows the same upright to be used on both left & right sides. The lower suspension pin on which the rear upright sits features 2 shims...

Lightweight yet ultra-strong rear upright molded from special graphite composite material. Features larger outside 8x16x5mm ball-bearing for increased reliability and life-span. Graphite rear upright is very strong and makes the rear of car very stable, yet is very light taking some load off of the rear suspension. Improves bump absorbing and handling on bumpy tracks. To...

XB8 2014 Alu Shim 4x7.5x1 (4)

XB8 2014 Alu Shim 4x7.5x2 (4)

Rear Anti-Roll Bar 2.0mm

XB8 2014 Rear Anti-Roll Bar 2.2mm

XB8 2014 Rear Anti-Roll Bar 2.4mm

XB8 2014 Rear Anti-Roll Bar 2.5mm

XB8 2014 Rear Anti-Roll Bar 2.6mm

XB8 2014 Rear Anti-Roll Bar 3.2mm

Alu Rear Wing Shim (2)

Composite Rear Wing Shim - Black (2)

Center Diff Mounting Plate Set

Genuine XRAY spare and optional parts - perfect for your XRAY!

Brake Pad Ferodo (4)

Bremsbelag PTFE (4)

GT Graphite Center Mounting Plate - 2.5mm

Genuine XRAY parts!

XB8 2017 Front/Rear Diff Large Bevel Gear 45T

Precision-ground polished alu pin 3.5 x 26.6 mm for internal satellite gears used in large front & rear differentials 01-355004 and 01-355005. Mounted in steel inserts instead of directly mounted in differential case increases the lifetime, especially in high temperatures. 30% lighter than steel pins. Set of 2.

Adjustable CVD Drive Axle - HUDY Spring Steel (2 pieces)

Alu Wheel Axle - Hard Coated (2)

Alu Wheel Axle Offset “+1mm” - Hard Coated

Wheel Nut With Cover - Hard Coated (2)

Pin with Flat Spot 3x16.8mm (2 pieces)

Set of composite molded shock pistons for two shock absorbers. Two-way flow shock pistons work in different ways when the piston travels up or down. With the rubber valve installed on the piston, 2 holes are closed when piston travels up… then when the piston travels down, the valve opens 2 extra holes so the oil flows through 10 holes in total. This configuration allows for...

Set of composite molded shock pistons for two shock absorbers. Two-way flow shock pistons work in different ways when the piston travels up or down. With the rubber valve installed on the piston, 2 holes are closed when piston travels up… then when the piston travels down, the valve opens 2 extra holes so the oil flows through 10 holes in total. This configuration allows for...

Set of composite molded shock pistons for two shock absorbers. Two-way flow shock pistons work in different ways when the piston travels up or down. With the rubber valve installed on the piston, 2 holes are closed when piston travels up… then when the piston travels down, the valve opens 2 extra holes so the oil flows through 10 holes in total. This configuration allows for...

Set of composite molded shock pistons for two shock absorbers. Two-way flow shock pistons work in different ways when the piston travels up or down. With the rubber valve installed on the piston, 2 holes are closed when piston travels up… then when the piston travels down, the valve opens 2 extra holes so the oil flows through 10 holes in total. This configuration allows for...

Set of composite molded shock pistons for two shock absorbers. Two-way flow shock pistons work in different ways when the piston travels up or down. With the rubber valve installed on the piston, 2 holes are closed when piston travels up… then when the piston travels down, the valve opens 2 extra holes so the oil flows through 10 holes in total. This configuration allows for...

XB8 2014 Alu Shock Cap Nut - Black Coated (2)

Genuine spare and option parts by XRAY!

Shock Rubber Membrane (4)

Shock Rubber Membrane Ribbed (4)

Shock Rubber Valve (4 pieces)

Shock Rubber Membrane Cell - Medium (4 pcs)

Shock Foam Insert (4)

Shock Shaft (2 pieces)

Spring 3 Dots (2 pieces)

XB8 2015 Fuel Tank 123cc with Floating Filter

The lightweight guard protects the fuel tank from heat which ensures consistency of the fuel and as such more consistent engine performance.

The lightweight guard protects the fuel tank from heat which ensures consistency of the fuel and as such more consistent engine performance.

Alu monoblock engine mount provides solid engine mounting and easy adjustment. Monoblock design is stiffer than standard single engine mounts. The keyed-mount design allows for the easy removal and replacement of the engine without the need for gear mesh re-adjustment after every replacement. Ultra-strong construction provides very long life and durability in even the most...

For motor mount 358714 and 358709.

Exhaust Mounting Wire 100mm

Air Filter Set - Low Profile

Air Filter Elbow - Low Profile

Air Filter Body & Cap - Low Profile

Composite Air Filter Cover

Air Filter Foam & Oil - Low Profile

Air Filter Foam - Low Profil (10)

XB8 2016 Composite Air Fuel Filter Set

Silicone Tubing 1m (2.4 x 5.5mm) Fluorescent Yellow

1/8 Onroad Body Wheel Base: ca. 325mm Width: ca. 310mm Fits all 1/8 GT cars with the same measurements.

1/8 Onroad Body - with wing - Aero Wheel Base: ca. 325mm Width: ca. 310mm Fits all 1/8 GT cars with the same measurements.

ALU CONICAL SHIM 3x6x2.0MM (10)

ALU CONICAL SHIM 3x6x2.0MM - BLACK (10)