Rear Upper Inner Camber Link Ball Joint - V2 (2)

Mounting Ball 6.8 (4)

Pivot Ball 6.8 (4)

Rear suspension holders are separated from the bulkheads and installed on the chassis. Mounting the holders directly to the chassis plate eliminates any flex from the bulkheads, improving the precision and responsiveness of the GT. The rear holders still offer multiple anti-squat positions, but the redesigned plates have less anti-squat, which is better suited for the GT...

Rear suspension holders are separated from the bulkheads and installed on the chassis. Mounting the holders directly to the chassis plate eliminates any flex from the bulkheads, improving the precision and responsiveness of the GT. The rear holders still offer multiple anti-squat positions, but the redesigned plates have less anti-squat, which is better suited for the GT...

The rear uprights were redesigned and feature larger outside 8x16x5mm ball-bearings for increased reliability and life-span. To extend the set-up alternatives, an additional lower roll-center adjustment position was added. The smart design allows the same upright to be used on both left & right sides. The lower suspension pin on which the rear upright sits features 2 shims...

Set of Composite Rear Hub Carrier Shims

Set of Composite Lower Arm Shims

The graphite rear roll center upright plate 4mm moves the camber link mount higher and further inboard to shorten the rear camber link. The graphite extensions feature 5 differen roll center positions for more tuning options on the GT.

XB8 2014 Rear Anti-Roll Bar 2.8mm

Composite Rear Holder Post (2 pieces)

Center Diff Mounting Plate Set

Composite 2-Speed Holder Plate (2 pieces)

Updated profile to improve the braking efficiency. The cams apply pressure to the brake backing plates more evenly in the center, improving braking feel and extending the service life of the brake pads.

Brake Disk - Hardened - V2

Steel Brake Pad – Laser Cut - Hardened (4)

Glued Brake Pad Set - Ultra-Efficient (4)

2-Speed Shaft HUDY Spring Steel

Genuine XRAY spare parts for your car!

Composite 2-Speed Upper Plate

Genuine spare and option parts from XRAY.

Differential Set Rear 46 Teeth V2

Differential Case V2

Steel Diff Bevel & Satellite Gears (2+4) V2

XB8 2014 Front/Rear Diff Large Bevel Gear 46T

F/R Diff. Outdrive Adapter - HUDY Spring Steel™ (2 pieces)

Central Diff Pin (2 pieces)

Diff Gasket front + rear (4 pieces)

Bevel Drive Gear 13T

CVD Drive Axle - Hudy Spring Steel™

CVD Universal Drive Shaft - Hudy Spring Steel™

CVD Drive Shaft Coupling - Hudy Spring Steel™

Alu Wheel Axle Offset “+2mm” - Hard Coated

Alu Wheel Nut - Ribbed - Hard Coated (2)

Genuine XRAY spare and option parts!

Composite Radio Case Set

Brake/Throttle Arms & Steering Servo Arms - Set

Composite Servo Shims 1.0, 1.5, 2.5mm (2+2+2 pieces)

XB8 2014 Brake/Throttle Sytem - Set

Composite Brake Wire Holder (2 pieces)

Lower Inner Pivot Pin F+R Euros'05 TQ (2)

Original XRAY Sparepart!

Rear Lower Outer Pivot Pin Screw 3mm (2)

POM Set of Shims for Shocks (2x 4 pieces)

Shock Piston Set 8-Hole (1.2, 1.3) 10-H. (1.1mm)

Composite Shock 6-Hole Piston Set (1.2, 1.3, 1.4mm)

Hardened Shock Shims (4)

Composite Shock Bushing & Shim (2+2)

Steel Screw Shock Pivot Ball with Hex (2)

Alu Shock Cap Nut Bleed Hole - Black Coated (2 pieces)

Soft version

Shock Absorbers (2 pcs)

Alu Shock Body Hard Coated (2 pieces)

Alu Shock Body Nut for Shock Boot (2)

Alu Shock Body Adj. Nut (2)

GT Shock Shaft 46mm (2 pieces)

Progressive shock springs designed especially for GT platform. Softer spring choice than original GTX springs. For inital setting used in rear. In this configuration the GTX will have maximum traction in most track conditions.

GT 4-Shoe Clutch - Complete Set Complete set of 4-shoe clutch system includes flywheel, graphite clutch shoes, medium clutch spring, assembly screws, flywheel collar, flywheel nut and pressure sleeve. Improves clutch bell engagement for better engine response and improves throttle feel. The 4-shoe clutch design allows for super-easy clutch setting from soft to hard setting,...

GT 4-Shoe Flywheel + Flywheel Collar

GT 4-Shoe Alu 7075 T6 Clutch Pressure Sleeve