Close filters
 
  •  
from to
2 From 2
No results were found for the filter!
header_51537_ml.JPG Tamiya 51537 - 6mm Snap Pin (15 pcs)
Genuine Tamiya spares.
€3.99 *
currently 3x in stock
header_51557_ml.jpg Tamiya 51557 - TRF 419 - Spur Gear 0.4 - 116T
TRF 419 - Spur Gear 0.4 - 116T
€4.99 *
currently 1x in stock
_35_ml.JPG Tamiya 51565 - TRF 419 - Gear Diff Alu Diff Joint (2pcs)
Gear Diff Alu Diff Joint (2pcs)
€12.99 *
currently 5x in stock
Tamiya-51567-TRF419-Gear-Diff-Unit-Bevel-Gear-Set__31e1o90ZiBL_ml.jpg Tamiya 51567 - TRF 419 - Internal Gears for Geardiff
Internal Gears for Geardiff
€4.99 *
currently 9x in stock
Tamiya 51569 - TRF 419 - Front Belt - 171T Tamiya 51569 - TRF 419 - Front Belt - 171T
TRF 419 - Front Belt - 171T
€7.99 *
currently 3x in stock
trf420419ta07-dichtung-kegel-diff-4-300051648_00_ml.jpeg Tamiya 51648 - TRF 420 - Gear Diff Gasket (4 pcs)
Genuine Tamiya spares and optionals - the best solution for your TRF! This item is shown in the manual as 9804853 - it's the same part in a different qty.
€4.99 *
currently 2x in stock
300053334_00-2_ml.jpg Tamiya 53334 - TRF 419 / TB Evo 6 - Low Friction Damper V-Parts (for 2 dampers)
Low Friction Damper V-Parts (for 2 dampers)
€5.99 *
currently 4x in stock
300053570_00-1_ml.jpg Tamiya 53570 - Clamp Type Alu Wheel Hub (4mm Thick - 4 pcs)
Clamp Type Alu Wheel Hub (4mm Thick - 4 pcs)
€24.99 *
currently 9x in stock
300053574_00-2_ml.jpg Tamiya 53574 - Damper Rod Guide & O-Ring (4 Sets)
Genuine Tamiya optionals!
€7.99 *
currently 3x in stock
300053585_00-2_ml.jpg Tamiya 53585 - 3mm Shim Set (3 types / 10pcs each)
3mm Shim Set (3 types / 10pcs each)
€7.99 *
currently 7x in stock
300053587_00-2_ml.jpg Tamiya 53587 - 5mm Shim Set (3 types / 10pcs each)
5mm Shim Set (3 types / 10pcs each)
€7.99 *
currently 18x in stock
300053601_00-1_ml.jpg Tamiya 53601 - TRF 419 / TB Evo 6 - Low Friction 5mm Adjuster (8 pcs)
Low Friction 5mm Adjuster (8 pcs)
€4.99 *
currently 1x in stock
300053640_00-2_ml.jpg Tamiya 53640 - Alu Ball Nut 5mm - BLUE (10pcs)
Genuine Tamiya Optional Parts. Please note: The measurements by Tamiya balls are specific for Tamiya and mathematically rounded. The balls won’t fit different brands which inquire exact 5mm balls as they are specifically designed to fit the listed Tamiya cars.
€10.99 *
currently 3x in stock
300053646_00-1_ml.jpg Tamiya 53646 - Alu Wheel Spacer - BLUE (4+4 pcs)
Genuine Tamiya Optional Parts.
€9.99 *
currently 4x in stock
300053851_00-2_ml.jpg Tamiya 53851 - TB Evo 7 - Suspension Shafts - 46mm (2 pcs)
Genuine Tamiya spares and optionals - the best solution for your TRF!
€10.99 *
currently 1x in stock
300053969_00-2_ml.jpg Tamiya 53969 - TRF 419 / TB Evo 6 - Hex Ball Head Connector 5mm - M3x8mm hard (5 pcs)
Hex Ball Head Connector 5mm - M3x9mm (2 pcs) Please note: The measurements by Tamiya balls are specific for Tamiya and mathematically rounded. The balls won’t fit different brands which inquire exact 5mm balls as they are specifically designed to fit the listed Tamiya cars.
€10.99 *
currently 4x in stock
300054145_00-2.jpg Tamiya 54145 - TRF 419 / TB Evo 6 - Front Foam Bumper
Front Foam Bumper
€4.99 *
currently 9x in stock
300054155_00-2_ml.jpg Tamiya 54155 - 3mm Alu Lock Nut - BLUE (5 pcs)
Safe weight!
€6.99 *
currently 3x in stock
0f0ea1ce6c26eb50491b712039e24da3_ml.jpg Tamiya 54156 - Alu Shims Set - M3 - Countersunk Washer - BLUE (8 pcs)
Suitable for M3 countersunk shims - with 7mm outer diameter.
€6.99 *
currently 5x in stock
Tamiya 54411 - 3mm Alu Nut - BLUE (5 pcs) Tamiya 54411 - 3mm Alu Nut - BLUE (5 pcs)
Safe weight!
€5.99 *
currently 3x in stock
300054568_00-2_ml.jpg Tamiya 54568 - TRF 419 / TB Evo 6 - Front Uprights - reinforced (2 pcs)
TRF 419 / TB Evo 6 - Front Uprights - reinforced (2 pcs)
€4.99 *
currently 3x in stock
Tamiya 54573 - Alu Wheel Spacer - 0.75mm - BLUE (8 pcs) Tamiya 54573 - Alu Wheel Spacer - 0.75mm - BLUE (8 pcs)
Genuine Tamiya Optional Parts.
€9.99 *
currently 4x in stock
300054580_00-2_ml.jpg Tamiya 54580 - TRF 419 / TB Evo 6 - C-Hubs 4° (2 pcs)
TRF 419 / TB Evo 6 - C-Hubs 4° (2 pcs)
€7.99 *
currently 6x in stock
Tamiya 54642 - M4 Steel Nylock Wheel Nut - BLACK (8 pcs) Tamiya 54642 - M4 Steel Nylock Wheel Nut - BLACK (8 pcs)
4mm Steel Nylock Wheel Nut - BLACK (8 pcs)
€5.99 *
currently 9x in stock
header_54691_ml.jpg Tamiya 54691 - TRF 419 / TB Evo 6 - Suspension Arms - 419X style (2 pcs)
Standard kit arms from 419X. Different composite, same shape, different damper mounting hole.
€7.99 *
currently 5x in stock
300054692_00-2_ml.jpg Tamiya 54692 - TRF 419 / 419X / TB Evo 6 - Rear Uprights - reinforced (2 pcs)
TRF 419 / TB Evo 6 - Rear Uprights - reinforced (2 pcs)
€5.99 *
currently 2x in stock
300054727_00-2_ml.jpg Tamiya 54727 - TB Evo 7 - Shock Membrane (4 pcs)
Genuine Tamiya spares and optionals - the best solution for your TRF!
€4.99 *
currently 6x in stock
header_54728_ml.jpg Tamiya 54728 - TB Evo 7 - Shock Piston - 4 hole (4 pcs)
Genuine Tamiya spares and optionals - the best solution for your TRF!
€5.99 *
currently 5x in stock
300054747_00-2_ml.jpg Tamiya 54747 - TRF 419 - Low Friction Suspension Balls (8 pcs)
Low Friction Suspension Balls
€7.99 *
currently 3x in stock
alu-abdeckung-hightorque-servo-saver-300054863_00_ml.jpeg Tamiya 54863 - Hi-Torque Servo Saver Cap - BLUE
Suitable for 50473 / 51000 / 54799 / 54893
€4.99 *
currently 8x in stock
trf-alu-xb-xd-x-querlenkerh-1-300054880_00_ml.jpeg Tamiya 54880 - TRF 420 / 419 - Alu Adjustable Suspension Mount - XB
These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension...
€13.99 *
currently 1x in stock
54882_ml.jpeg Tamiya 54882 - TRF 420 / 419 - Alu Adjustable Suspension Mount - E
These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension...
€13.99 *
currently 9x in stock
trf-alu-xb-axb-b-xd-x-querlenk-11-300054883_00_ml.jpeg Tamiya 54883 - TRF 420 / 419 - Alu Adjustable Suspension Mount - XB split
These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension...
€17.99 *
currently 6x in stock
54884_ml.jpeg Tamiya 54884 - TRF 420 / 419 - Alu Adjustable Suspension Mount - A split
These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension...
€18.99 *
currently 9x in stock
54885_ml.jpeg Tamiya 54885 - TRF 420 / 419 - Alu Adjustable Suspension Mount - E split
These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension...
€18.99 *
currently 10x in stock
alu-servohorn-set-einst-m-ht-servos-300054893_00_ml.jpeg Tamiya 54893 - Hi-Torque Servo Saver - with adjustable Horn - 15-22mm - BLACK
★Set distance between servo horn center and ball connector at 1m increments between 15 and 22mm. ★Steering range is also adjustable. ★Incorporates servo saver function, providing protection in case of crashes and other shocks.
€32.99 *
currently 5x in stock
5700106_ml.JPG Tamiya 5700106 - TB Evo 6 - 5x8mm flanged Bearing (1 pc)
TB Evo 6 - 5x8mm flanged Bearing (1 pc)
€4.99 *
currently 1x in stock
IMG_1804_ml.JPG Tamiya 9803041 - TRF419XR - Alu Stabilizer Rod Stopper (2 pcs)
Genuine Tamiya spare parts!
€5.99 *
currently 3x in stock
IMG_1803_ml.JPG Tamiya 9803068 - TRF419XR - Alu Stiffeners Post (2 pcs)
Genuine Tamiya spare parts!
€6.99 *
currently 5x in stock
IMG_0730_ml.JPG Tamiya 9804477 - TRF419X / M-07 - Gear Diff Screws - 2x8mm (10 pcs)
Genuine Tamiya Spare Parts!
€4.99 *
currently 3x in stock
IMG_0712_ml.JPG Tamiya 9804781 - TRF419X - Alu Stabilizer End (4 pcs)
Genuine Tamiya Spare Parts!
€8.99 *
currently 2x in stock
IMG_0737_ml.JPG Tamiya 9804852 - TRF419X - Alu Gear Diff Cross Shaft (2 pcs)
Genuine Tamiya Spare Parts!
€8.99 *
currently 6x in stock
IMG_0721_ml.JPG Tamiya 9804939 - TRF419X - Alu Upper Arm Spacer 0.5mm - BLACK (4 pcs)
Genuine Tamiya Spare Parts!
€9.99 *
currently 2x in stock
IMG_0735_ml.JPG Tamiya 9804942 - TRF419X - C-Hub Bushing (2 pcs)
Genuine Tamiya Spare Parts!
€4.99 *
currently 9x in stock
IMG_0735_ml.JPG Tamiya 9804943 - TRF419X - C-Hub Bushing (2 pcs)
Genuine Tamiya Spare Parts!
€4.99 *
currently 9x in stock
IMG_0716_ml.JPG Tamiya 9804944 - TRF419X - Damper Cylinder (2pcs)
Genuine Tamiya Spare Parts!
€28.99 *
currently 2x in stock
IMG_0731_ml.JPG Tamiya 9804946 - TRF419X - Damper Shaft 23mm (2 pcs)
Genuine Tamiya Spare Parts!
€11.99 *
currently 1x in stock
IMG_0728_ml.JPG Tamiya 9804947 - TRF419X - 13mm Damper O-Ring (4 pcs)
Genuine Tamiya Spare Parts!
€4.99 *
currently 4x in stock
IMG_0722_ml.JPG Tamiya 9804950 - TRF419X - Alu Battery Holder Set - BLACK (3 pcs)
Genuine Tamiya Spare Parts!
€21.99 *
currently 9x in stock
IMG_0729_ml.JPG Tamiya 9805701 - TRF419X - Gear Diff Sealing - 5mm O-Ring (2 pcs)
Genuine Tamiya Spare Parts!
€4.99 *
currently 6x in stock
2 From 2