Close filters
 
  •  
from to
2 From 3
No results were found for the filter!
trf420ta07-37z-diff-geh-1-300051643_00_ml.jpeg Tamiya 51643 - TRF 420 - Gear Diff Case and Pulley - 37T
Genuine Tamiya spares and optionals - the best solution for your TRF!
€5.99 *
currently 9x in stock
51644_ml.jpeg Tamiya 51644 - TRF 420 - Bumper and Body Posts - B-Parts
Genuine TRF420 part.
€7.99 *
currently 9x in stock
trf420-k-teile-lagerhalterung-1-300051645_00_ml.jpeg Tamiya 51645 - TRF 420 - Bearing Holders - K-Parts (4 pcs)
Genuine Tamiya spares and optionals - the best solution for your TRF!
€6.99 *
currently 3x in stock
trf420-alu-mitnehmer-fspool-diff2vo-300051647_00_ml.jpeg Tamiya 51647 - TRF 420 - Alu Front Direct Cups (2 pcs)
Genuine Tamiya spares and optionals - the best solution for your TRF!
€13.99 *
currently 9x in stock
trf420419ta07-dichtung-kegel-diff-4-300051648_00_ml.jpeg Tamiya 51648 - TRF 420 - Gear Diff Gasket (4 pcs)
Genuine Tamiya spares and optionals - the best solution for your TRF! This item is shown in the manual as 9804853 - it's the same part in a different qty.
€4.99 *
currently 2x in stock
51649_ml.jpeg Tamiya 51649 - TRF 420 - Gear Diff Unit Set - 37T
The new gear differential unit for the TRF420 chassis is now available in the Tamiya Spare Parts Series. This set includes all parts needed to construct the 37T differential, which is lighter and even more oil-tight than predecessors. Why not build up a number of units with different oil viscosities and keep them ready to change in and out as your car/circuit requires? Set...
€31.99 *
currently 1x in stock
original_300051667_00_ml.jpg Tamiya 51667 - TA-08 - Spur Gear - M 0.6 - 71T
Genuine Tamiya spare parts!
€4.99 *
currently 3x in stock
original_300051668_00_ml.jpg Tamiya 51668 - TA-08 - Spur Gear - M 0.4 - 110T
Genuine Tamiya spare parts!
€4.99 *
currently 5x in stock
original_300051669_00_ml.jpg Tamiya 51669 - TA-08 - D-Parts - Suspension Set (8 pcs)
Genuine Tamiya spare parts!
€10.99 *
currently 10x in stock
original_300051670_00_ml.jpg Tamiya 51670 - TA-08 - Front Belt - 132T - 396mm
Genuine Tamiya spare parts!
€9.99 *
currently 1x in stock
original_300051671_00_ml.jpg Tamiya 51671 - TA-08 - Rear Belt - 101T - 303mm
Genuine Tamiya spare parts!
€7.99 *
currently 4x in stock
Tamiya 53501 - TA-08 / TT-02SR - 42mm CVD Shafts - Steel (2 pcs) Tamiya 53501 - TA-08 / TT-02SR - 42mm CVD Shafts - Steel (2 pcs)
Genuine Tamiya Spares and Optionals!
€18.99 *
currently 2x in stock
Tamiya 53501 - TA-08 / TT-02SR - 42mm CVD Shafts - Steel (2 pcs) Tamiya 53501 - TA-08 / TT-02SR - 42mm CVD Shafts - Steel (2 pcs)
Genuine Tamiya Spares and Optionals!
€4.99 *
currently 10x in stock
0cb5607e32d772cba65790b2a96dd3b9_ml.jpg Tamiya 53502 - TT-02SR - Alu Lightweight Rear Swing Shafts - 42mm - BLUE (2 pcs)
This swing shaft reduces weight about 60%. Please use it only in the rear - cause it may be deformed by heavy collision.
€23.99 *
currently 14x in stock
300053569_00-1_ml.jpg Tamiya 53569 - Clamp Type Alu Wheel Hub (6mm Thick - 4 pcs)
Clamp Type Alu Wheel Hub (6mm Thick - 4 pcs)
€27.99 *
currently 3x in stock
300053570_00-1_ml.jpg Tamiya 53570 - Clamp Type Alu Wheel Hub (4mm Thick - 4 pcs)
Clamp Type Alu Wheel Hub (4mm Thick - 4 pcs)
€24.99 *
currently 9x in stock
300053574_00-2_ml.jpg Tamiya 53574 - Damper Rod Guide & O-Ring (4 Sets)
Genuine Tamiya optionals!
€7.99 *
currently 3x in stock
300053585_00-2_ml.jpg Tamiya 53585 - 3mm Shim Set (3 types / 10pcs each)
3mm Shim Set (3 types / 10pcs each)
€7.99 *
currently 7x in stock
300053587_00-2_ml.jpg Tamiya 53587 - 5mm Shim Set (3 types / 10pcs each)
5mm Shim Set (3 types / 10pcs each)
€7.99 *
currently 18x in stock
53595_ml.JPG Tamiya 53595 - TRF Damper Alu Retainer - for 12.5mm springs (4 pcs)
Genuine Tamiya spare and optional parts!
€12.99 *
currently 3x in stock
Tamiya 53598 - Alu Ball Connector 5mm - Flourine Coated (10pcs) Tamiya 53598 - Alu Ball Connector 5mm - Flourine Coated (10pcs)
Genuine Tamiya Optional Parts. Please note: The measurements by Tamiya balls are specific for Tamiya and mathematically rounded. The balls won’t fit different brands which inquire exact 5mm balls as they are specifically designed to fit the listed Tamiya cars.
€13.99 *
currently 1x in stock
300053640_00-2_ml.jpg Tamiya 53640 - Alu Ball Nut 5mm - BLUE (10pcs)
Genuine Tamiya Optional Parts. Please note: The measurements by Tamiya balls are specific for Tamiya and mathematically rounded. The balls won’t fit different brands which inquire exact 5mm balls as they are specifically designed to fit the listed Tamiya cars.
€10.99 *
currently 3x in stock
300053642_00-1_ml.jpg Tamiya 53642 - Alu Ball Connector 5mm - BLUE (10pcs)
Genuine Tamiya Optional Parts. Please note: The measurements by Tamiya balls are specific for Tamiya and mathematically rounded. The balls won’t fit different brands which inquire exact 5mm balls as they are specifically designed to fit the listed Tamiya cars.
€9.99 *
currently 2x in stock
300053646_00-1_ml.jpg Tamiya 53646 - Alu Wheel Spacer - BLUE (4+4 pcs)
Genuine Tamiya Optional Parts.
€9.99 *
currently 4x in stock
300053823_00-2_ml.jpg Tamiya 53823 - Clamp Type Alu Wheel Hub (5mm Thick - 4 pcs)
Clamp Type Alu Wheel Hub (5mm Thick - 4 pcs)
€26.99 *
currently 10x in stock
header_53906_ml.jpg Tamiya 53906 - TB Evo 7 - 5mm Alu Ballheads - M3x5mm - BLUE (5pcs)
Genuine Tamiya spares and optionals - the best solution for your TRF! Please note: The measurements by Tamiya balls are specific for Tamiya and mathematically rounded. The balls won’t fit different brands which inquire exact 5mm balls as they are specifically designed to fit the listed Tamiya cars.
€12.99 *
currently 7x in stock
alu-ruderhorn-blau-elox-htservo-saver-300054121_00_ml.jpeg Tamiya 54121 - Alu Horn for High-Torque Servo Saver
Use this alu servo horn to replace the standard part for greater rigidity and sharper steering feel. Fits to 51000 and 50473.
€19.99 *
currently 10x in stock
Tamiya 54209 - TA-08 - 5mm Alu Ball Head - Flourine Coated - M3x5mm (5 pcs) Tamiya 54209 - TA-08 - 5mm Alu Ball Head - Flourine Coated - M3x5mm (5 pcs)
Genuine Tamiya Spares and Optionals! Please note: The measurements by Tamiya balls are specific for Tamiya and mathematically rounded. The balls won’t fit different brands which inquire exact 5mm balls as they are specifically designed to fit the listed Tamiya cars.
€15.99 *
currently 11x in stock
Tamiya 54573 - Alu Wheel Spacer - 0.75mm - BLUE (8 pcs) Tamiya 54573 - Alu Wheel Spacer - 0.75mm - BLUE (8 pcs)
Genuine Tamiya Optional Parts.
€9.99 *
currently 4x in stock
300054604_00-2-2_ml.jpg Tamiya 54604 - Body Mount Extension Set (8 pcs)
4x for 5.5mm Body Posts 4x for 6.0mm Body Posts
€5.99 *
currently 1x in stock
Tamiya 54642 - M4 Steel Nylock Wheel Nut - BLACK (8 pcs) Tamiya 54642 - M4 Steel Nylock Wheel Nut - BLACK (8 pcs)
4mm Steel Nylock Wheel Nut - BLACK (8 pcs)
€5.99 *
currently 9x in stock
trf420419ta07-alu-lenkhebel-set-300054704_00_ml.jpeg Tamiya 54704 - TRF 420 - Alu Steering Arms incl. Bearings (2 Arms)
Genuine Tamiya spares and optionals - the best solution for your TRF!
€24.99 *
currently 5x in stock
300054727_00-2_ml.jpg Tamiya 54727 - TB Evo 7 - Shock Membrane (4 pcs)
Genuine Tamiya spares and optionals - the best solution for your TRF!
€4.99 *
currently 6x in stock
header_54728_ml.jpg Tamiya 54728 - TB Evo 7 - Shock Piston - 4 hole (4 pcs)
Genuine Tamiya spares and optionals - the best solution for your TRF!
€5.99 *
currently 5x in stock
300054730_00-2_ml.jpg Tamiya 54730 - TRF 419 - POM TRF Damper Rod Guide (4 pcs)
The rod guides in this set are made from POM plastic; harder than standard rod guides found in TRF aluminum dampers, they are less prone to warping and offer continued smooth movement with resistance to shock oil leaks. They are for use with the high-performance TRF Damper product range. • Rod Guide (Hard) x4 • Molded in black POM. • Compatible with all TRF aluminum dampers.
€4.99 *
currently 4x in stock
300054772_00-2_ml.jpg Tamiya 54772 - Brass Battery Weight - 25g - 137x23mm
Can be attached below the battery. Not only for TA07
€16.99 *
currently 2x in stock
300054797_00-2_ml.jpg Tamiya 54797 - Touring Car Spring Set II - short (3x 2 pcs)
Genuine Tamiya optionals! 13mm inner diameter 23mm length
€14.99 *
currently 9x in stock
54855_ml.jpeg Tamiya 54855 - POM Spacer - 5.5x0.5mm (4 Stück)
POM made shims.
€4.99 *
currently 3x in stock
alu-schrauben-4-f-servomontage-300054862_00_ml.jpeg Tamiya 54862 - TRF 420 - Alu Servo Step Screws - BLUE (4 pcs)
Genuine Tamiya spares and optionals - the best solution for your TRF!
€7.99 *
currently 1x in stock
alu-abdeckung-hightorque-servo-saver-300054863_00_ml.jpeg Tamiya 54863 - Hi-Torque Servo Saver Cap - BLUE
Suitable for 50473 / 51000 / 54799 / 54893
€4.99 *
currently 8x in stock
Tamiya 54868 - TRF 420 - Open Face Reinforced Adjusters 5mm - medium (8 pcs) Tamiya 54868 - TRF 420 - Open Face Reinforced Adjusters 5mm - medium (8 pcs)
Genuine Tamiya spares and optionals - the best solution for your TRF!
€5.99 *
currently 5x in stock
5mm-kugelpfanne-long15mm-8-offen-300054869_00_ml.jpeg Tamiya 54869 - TRF 420 - Open Face Reinforced Adjusters 5mm - long (8 pcs)
Genuine Tamiya spares and optionals - the best solution for your TRF!
€4.99 *
currently 4x in stock
54871_ml.jpeg Tamiya 54871 - TRF 420 / 419X - V-Parts for TRF Dampers (for 2 Shocks)
Suitable for TRF420 or cars equipped with the SSBB Upgrade Kit 54878.
€5.99 *
currently 10x in stock
trf-alu-xb-xd-x-querlenkerh-1-300054880_00_ml.jpeg Tamiya 54880 - TRF 420 / 419 - Alu Adjustable Suspension Mount - XB
These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension...
€13.99 *
currently 1x in stock
54882_ml.jpeg Tamiya 54882 - TRF 420 / 419 - Alu Adjustable Suspension Mount - E
These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension...
€13.99 *
currently 9x in stock
trf-alu-xb-axb-b-xd-x-querlenk-11-300054883_00_ml.jpeg Tamiya 54883 - TRF 420 / 419 - Alu Adjustable Suspension Mount - XB split
These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension...
€17.99 *
currently 6x in stock
54884_ml.jpeg Tamiya 54884 - TRF 420 / 419 - Alu Adjustable Suspension Mount - A split
These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension...
€18.99 *
currently 9x in stock
54885_ml.jpeg Tamiya 54885 - TRF 420 / 419 - Alu Adjustable Suspension Mount - E split
These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension...
€18.99 *
currently 10x in stock
alu-servohorn-set-einst-m-ht-servos-300054893_00_ml.jpeg Tamiya 54893 - Hi-Torque Servo Saver - with adjustable Horn - 15-22mm - BLACK
★Set distance between servo horn center and ball connector at 1m increments between 15 and 22mm. ★Steering range is also adjustable. ★Incorporates servo saver function, providing protection in case of crashes and other shocks.
€32.99 *
currently 5x in stock
trf-kunstst-querlenkerlager-7-paar-300054922_00_ml.jpeg Tamiya 54922 - TRF 420 - Suspension Mount Bushings (7 pair)
Genuine Tamiya spares and optionals - the best solution for your TRF!
€4.99 *
currently 16x in stock
trf420-mitnehmer-spool-diff-2-stahl-300054934_00_ml.jpeg Tamiya 54934 - TRF 420 - Steel Front Direct Cups (2 pcs)
Crafted in durable steel, these front direct cups will stand up better to impacts and also provide more weight toward the front of your car.
€13.99 *
currently 7x in stock
54935_ml.jpeg Tamiya 54935 - TRF 420 - Brass Adjustable Suspension Mounts - XB
Genuine Tamiya spares and optionals - the best solution for your TRF!
€14.99 *
currently 9x in stock
54936_ml.jpeg Tamiya 54936 - TRF 420 - Brass Adjustable Suspension Mounts - A
Genuine Tamiya spares and optionals - the best solution for your TRF!
€14.99 *
currently 9x in stock
54937_ml.jpeg Tamiya 54937 - TRF 420 - Brass Adjustable Suspension Mounts - E
Genuine Tamiya spares and optionals - the best solution for your TRF!
€16.99 *
currently 3x in stock
54939_ml.jpeg Tamiya 54938 - TRF 420 - Brass Adjustable Seperate Suspension Mounts - XB
Genuine Tamiya spares and optionals - the best solution for your TRF!
€20.99 *
currently 3x in stock
2 From 3