Spare Blades for HUDY Pocket Knife (188981)

Toolbase for 22 tools: 1x 22mm diameter 7x 18mm diameter 1x 16mm diameter 4x 14mm diameter 1x 12mm diameter 1x 10 mm diameter 1x 9mm diameter 3x 7mm diameter 3x 4mm diameter Total dimensions: 215x60x25mm

HUDY Heat Pad - 100mm diameter

HUDY PIT FOAM

HUDY PIT MAT 750x1200MM The smell fades after a while. We recommend to unpack the mat after receiving it and let it "breath" for a week in the basement :-) .

HUDY EXCLUSIVE PIT Mat Thickness: 3mm

HUDY EXCLUSIVE PIT Mat Thickness: 3mm

Clean and professional work space anti-slip rubber backing Thick 2.5mm cloth material; a soft yet durable work surface Cloth top layer prevents parts from rolling Roll-able design for easy transportation and storage

Clean and professional work space anti-slip rubber backing Thick 2.5mm cloth material; a soft yet durable work surface Cloth top layer prevents parts from rolling Roll-able design for easy transportation and storage

HUDY COMPACT CLEANING TOWEL (10)

HUDY EXCLUSIVE PIT TOWEL dimensions: length 1100mm width 700mm

HUDY STICKERS FOR BODIES

The premium HUDY Chassis Protector vinyl sticker is a great option to help protect the chassis. It can be easily cut to fit your car. Highly recommended for use on new and used chassis to resist against scratches and scrapes and prolong the life of the chassis. For best results, always replace the sheet when noticeable wear occurs. In addition to protecting the chassis, the...

The sticker strengthen the body around the bodypost hole and prevent tears.

95x68.5x1mm - to be placed below the battery.

95x47x1mm - to be placed below the battery.

Specially-designed 35g stainless steel weight for placement under slim battery pack to add weight as low as possible. Helps to improve the balance of the car and makes the car easier to drive. Dimensions: 135x33x1mm. Fits standard 1/10 on-road cars. A “must have” option part.

Sorry, we did not make the price for this product...

Precision machined 5g pure tungsten chassis weight. The weight is smaller than the brass weights and is easier to install with a cleaner layout. The super small weight results in lower CG comparing to standard weights. Produced from very rare and heavy pure tungsten material, not a typical tungsten mixture. The pure tungsten has the highest density structure and is the...

Precision machined 10g pure tungsten chassis weight. The weight is smaller than the brass weights and is easier to install with a cleaner layout. The super small weight results in lower CG comparing to standard weights. Produced from very rare and heavy pure tungsten material, not a typical tungsten mixture. The pure tungsten has the highest density structure and is the...

Precision machined 10g pure tungsten chassis weight. The weight is smaller than the brass weights and is easier to install with a cleaner layout. The super small weight results in lower CG comparing to standard weights. Produced from very rare and heavy pure tungsten material, not a typical tungsten mixture. The pure tungsten has the highest density structure and is the...

Weights with M3 thread - to place it wherever it's necessary. 15mm diameter 8mm height

Precision machined 10g pure tungsten chassis weight. The weight is smaller than the brass weights and is easier to install with a cleaner layout. The super small weight results in lower CG comparing to standard weights. Produced from very rare and heavy pure tungsten material, not a typical tungsten mixture. The pure tungsten has the highest density structure and is the...

Precision machined pure tungsten chassis weight. The weight is smaller than the brass weights and is easier to install with a cleaner layout. The super small weight results in lower CG comparing to standard weights. Produced from very rare and heavy pure tungsten material, not a typical tungsten mixture. The pure tungsten has the highest density structure and is the heaviest...

Precision machined pure tungsten chassis weight. The weight is smaller than the brass weights and is easier to install with a cleaner layout. The super small weight results in lower CG comparing to standard weights. Produced from very rare and heavy pure tungsten material, not a typical tungsten mixture. The pure tungsten has the highest density structure and is the heaviest...

Will fit into the slots of a Sub-C chassis.

- Aluminum 30mm RC Fan - 3 different mounting design alternatives - Extremely reliable - For cooling of the ESC & motor - Brushless design - Bearing equipped - Internal soldering tabs - 200mm connecting cable with BEC connector - 60mm main cable soldered to fan

- Aluminum 30mm RC Fan - 3 different mounting design alternatives - Extremely reliable - For cooling of the ESC & motor - Brushless design - Bearing equipped - Internal soldering tabs - 200mm connecting cable with BEC connector - 60mm main cable soldered to fan

- Aluminum 30mm RC Fan - 3 different mounting design alternatives - Extremely reliable - For cooling of the ESC & motor - Brushless design - Bearing equipped - Internal soldering tabs - 200mm connecting cable with BEC connector - 60mm main cable soldered to fan

30x30x10mm fan 6-8.4V DC input 22.000 - 24.000 rpm with ball bearings wire already soldered to the fan by using external tabs

40x40x10mm fan 6-8.4V DC input 14.000 - 15.000 rpm wire already soldered to the fan by using external tabs with ball bearings

30x30x10mm fan 6-8.4V DC input 22.000 - 24.000 rpm with ball bearings wire already soldered to the fan by using internal tabs

40x40x10mm fan 6-8.4V DC input 14.000 - 15.000 rpm wire already soldered to the fan by using internal tabs with ball bearings

Rear wing side plates CNC-machined from premium-grade graphite material for 1/10 nitro cars. Made from very thin and light 0.5mm graphite material. The size of the side plate is according to EFRA and IFMAR rules. Set of 2 pcs.

Rear wing side plates CNC-machined from premium-grade graphite material for 1/10 electric cars. Made from very thin and light 0.5mm graphite material. The size of the side plate is according to EFRA and IFMAR rules. Set of 2 pcs.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu servo horn for use on steering servos. Clamp design allows easy assembly. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm linkage hardware. Laser engraved for easy identification.

CNC-machined alu throttle servo horn for use on throttle servos. Clamp design allows easy assembly. Maximum strength to eliminate flex associated with composite servo horns. Ultra-strong construction provides very long life and durability. Drilled and tapped for 3mm-linkage hardware. Machined from strong Swiss 7075 T6 aluminum and black coated. Laser engraved for easy...

CNC-machined alu throttle servo horn for use on throttle servos. Clamp design allows easy assembly. Maximum strength to eliminate flex associated with composite servo horns. Ultra-strong construction provides very long life and durability. Drilled and tapped for 3mm-linkage hardware. Machined from strong Swiss 7075 T6 aluminum and black coated. Laser engraved for easy...

CNC-machined alu throttle servo horn for use on throttle servos. Clamp design allows easy assembly. Maximum strength to eliminate flex associated with composite servo horns. Ultra-strong construction provides very long life and durability. Drilled and tapped for 3mm-linkage hardware. Machined from strong Swiss 7075 T6 aluminum and black coated. Laser engraved for easy...

CNC-machined alu throttle servo horn for use on throttle servos. Clamp design allows easy assembly. Maximum strength to eliminate flex associated with composite servo horns. Ultra-strong construction provides very long life and durability. Drilled and tapped for 3mm-linkage hardware. Machined from strong Swiss 7075 T6 aluminum and black coated. Laser engraved for easy...

CNC-machined alu throttle servo horn for use on throttle servos. Clamp design allows easy assembly. Maximum strength to eliminate flex associated with composite servo horns. Ultra-strong construction provides very long life and durability. Drilled and tapped for 3mm-linkage hardware. Machined from strong Swiss 7075 T6 aluminum and black coated. Laser engraved for easy...

CNC-machined alu throttle servo horn for use on throttle servos. Clamp design allows easy assembly. Maximum strength to eliminate flex associated with composite servo horns. Ultra-strong construction provides very long life and durability. Drilled and tapped for 3mm-linkage hardware. Machined from strong Swiss 7075 T6 aluminum and black coated. Laser engraved for easy...

CNC-machined alu throttle servo horn for use on throttle servos. Clamp design allows easy assembly. Maximum strength to eliminate flex associated with composite servo horns. Ultra-strong construction provides very long life and durability. Drilled and tapped for 3mm-linkage hardware. Machined from strong Swiss 7075 T6 aluminum and black coated. Laser engraved for easy...

CNC-machined alu throttle servo horn for use on throttle servos. Clamp design allows easy assembly. Maximum strength to eliminate flex associated with composite servo horns. Ultra-strong construction provides very long life and durability. Drilled and tapped for 3mm-linkage hardware. Machined from strong Swiss 7075 T6 aluminum and black coated. Laser engraved for easy...

CNC-machined alu throttle servo horn for use on throttle servos. Clamp design allows easy assembly. Maximum strength to eliminate flex associated with composite servo horns. Ultra-strong construction provides very long life and durability. Drilled and tapped for 3mm-linkage hardware. Machined from strong Swiss 7075 T6 aluminum and black coated. Laser engraved for easy...

Alu Servo Horn KO, JR, Sanwa, Airtronics - 23T CNC-machined alu servo horn with offset for use on steering servos. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm-linkage hardware. Two holes for linkage mounting allows quick & easy linkage angle change. Primarily recommended for...

Alu Servo Horn Hitec - 24T CNC-machined alu servo horn with offset for use on steering servos. Alu servo horn offers maximum steering control by eliminating the flex often associated with composite servo horns. Drilled and tapped for 3mm-linkage hardware. Two holes for linkage mounting allows quick & easy linkage angle change. Primarily recommended for 1/10 and 1/8 on-road...