21.5T 2050kV (is what HobbyWing says - we've noticed that the motors does not have more than 1950kV) Sensored Design

25.5T 1550kV Sensored Design

21.5T (equivalent to) 2100kV Sensored Design 4-pole, 12 slots, short stack and housing design

17.5T (equivalent to) 2600kV Sensored Design 4-pole, 12 slots, short stack and housing design

13.5T (equivalent to) 3200kV Sensored Design 4-pole, 12 slots, short stack and housing design

Programing Box 2C LED for XERUN, EZRUN and QUICRUN

Overview This multifunction program box is for programming HOBBYWING brushless ESCs. Its friendly LCD interface makes ESC programming easy and quick. With a PC, you can upgrade ESC firmware and further adjust ESC parameters online. Besides, it’s compact, portable and very applicable for field use. Thanks to built-in OTA programming feature through Bluetooth™, you can now use...

Suitable for: XERUN & EZRUN (car) PLATINUM (air) SEAKING PRO (boat) This Bluetooth modul requieres a smartphone / tablet with iOS or Android. HobbyWing offers a free app for those two operating systems.

Hobbywing 3060100 - DC-Booster for 1s Lipo, Output 6V 2 Ampere 1S DC-DC BOOSTER is a DC-DC power booster module which can draw power from the 1S Lipo battery then boosts it to the voltage (6V) suits the receiver & servo and provides the continuous output current up to 3Amp. 1S DC-DC BOOSTER is mainly applied in 1/12th scale RC vehicles. The 1/12th scale car usually uses 1S...

Nice tool whichs helps to replace a rotor within a few moments. Will fit to 1/10 motors, type 540. Maximum rotor diameter is 13.0mm. Not only for HobbyWing motors!

Silicon Wire - super soft - 11AWG - 100cm - BLACK

Silicon Wire - super soft - 13AWG - 100cm - BLACK

Sensor converter cable with JST connector, suitable for sensored brushless motors (z.B. Ezrun MAX8 G2, MAX4 HV). This cable is characterized by its particularly high water protection (according to the IP67 standard). Note: No thermal motor protection.

XERUN V10 G3 - Rotor 12.1mm - D5 - 24.1mm length

XERUN V10 G3 - Rotor 12.5mm - D5 - 24.1mm length

XERUN V10 G3 - Endbell Set - On-Road Stock - incl. Sensor Unit Fits motors 10.5-25.5T (Hole B). Weight: 24,3g

XERUN V10 G3 - Endbell Set - On-Road Modified - incl. Sensor Unit Fits motors 5.5-8.5T (Hole S). Weight: 25g

XERUN V10 G4 - Rotor 12.5mm - F7 - 25.2mm length

XERUN V10 G4 - Rotor 12.5mm - F7 - 24.1mm length

Includes front and rear endbell, bearings, sensor unit and screws.

XERUN Bandit G4 - Rotor 13.9mm - D5 - 24.1mm length

XERUN Bandit G4 - Rotor 13.3mm - D5 - 24.1mm length

Length: 115mm Weight: 3g

This Electronic Power Switch features multiple functions like battery capacity indication, low-voltage indication, over-current protection, short-circuit protection and thermal protection; it can control the ON/OFF of current flow to the receiver, and it is operated by only one button, this helped to solve problems like bad contact caused by vibration or oxidation of...

Sensor Wire 80mm for Xerun Brushless Motors

Special designed spare part for special HobbyWing ESC.

Messurements: Size: 35x35x10mm Distanz Hole-to-Hole: ca. 30mm including 4 screws

Specification: Ball Bearing Wire length ca. 20mm 10.000RPM@5V 0.13A

Specification: Ball Bearing Wire length ca. 20mm 10.000RPM@5V 0.10A

Messurements: Size: 20x20x8mm including 2 screws

ESC Ezrun MAX8 G2 Sensorless ESC 160A - 3-6s - for 1:8 Technical Data: Current: 160A / 1050A Motor: for Sensored/ Sensorless Brushless Motors Application: 1/8 cars (Touring Car, Buggy, Truggy, Monster Truck with High-Level Configuration) Motor Limit: with 4S LiPo: KV with 6S LiPo: KV Motor Size 4278 Input: 3-6S LiPos BEC Output: 6V / 7.4V / 8.4V (switchable) Fan: included...

60A Limit ALWAYS ZERO BOOST! One of the best ESC for real STOCK racing! Available as 10.5T, 13.5T, 17.5T, 21.5T and 25.5T Combo.

Technical Specification ESC: Current (Cont./Peak): 30A/80A Motor Type: Brushless Motor Limit: 1626er Motors LiPo-/NiMH-Cells: 2S LiPo BEC-Output: 6V/7.4V (adjustable), 3.5A Switch Mode Dimensions: 22.7x14.2x11.8mm Weight: 5g without wire Programming: shared with throttle cable Technical Specification Motor: Type: 1626 Brushless Sensor, 2-pole RPM/Volt: 3500kV Outer Diameter:...

Technical Specification ESC: Current (Cont./Peak): 30A/80A Motor Type: Brushless Motor Limit: 1626er Motors LiPo-/NiMH-Cells: 2S LiPo BEC-Output: 6V/7.4V (adjustable), 3.5A Switch Mode Dimensions: 22.7x14.2x11.8mm Weight: 5g without wire Programming: shared with throttle cable Technical Specification Motor: Type: 1626 Brushless Sensor, 2-pole RPM/Volt: 5000kV Outer Diameter:...

Technical Specification ESC: Current (Cont./Peak): 30A/80A Motor Type: Brushless Motor Limit: 1626er Motors LiPo-/NiMH-Cells: 2S LiPo BEC-Output: 6V/7.4V (adjustable), 3.5A Switch Mode Dimensions: 22.7x14.2x11.8mm Weight: 5g without wire Programming: shared with throttle cable Technical Specification Motor: Type: 1626 Brushless Sensor, 2-pole RPM/Volt: 6500kV Outer Diameter:...

60A Limit - Zero Boost One of the best ESC for real STOCK racing! Available as 10.5T, 13.5T, 17.5T, 21.5T and 25.5T Combo.

ESC Features: More than 30 parameter setting options 3 preinstalled setups for 1/8 racing (e.g. zero timing/blinky mode, 1/8 off-road racing, 1/8 on-road racing) Inclusive a dual brake mode to switch between the regular brake mode and the disc brake mode Average 15°C cooler performance under full load than the XR8 Pro G2 Super BEC with max.12A and 6 and 7.4V for the use of...

ESC Features: More than 30 parameter setting options 3 preinstalled setups for 1/8 racing (e.g. zero timing/blinky mode, 1/8 off-road racing, 1/8 on-road racing) Inclusive a dual brake mode to switch between the regular brake mode and the disc brake mode Average 15°C cooler performance under full load than the XR8 Pro G2 Super BEC with max.12A and 6 and 7.4V for the use of...

Technical specification ESC: Current (cont./peak): 200A / 1080A No. of cells: 2-6S LiPo Motor Limit: 4S LiPo: KV = 3000; 6S LiPo: KV = 2400 BEC Voltage: 6V-8.4V - Current (cont./peak): 6A/15A Switch Mode Dimensions: 56.1x42.1x38.5mm Weight: 122g (without cable) Application: 1/8 Offroad Technical specification motor: Type: Brushless, sensored No. of cells: 2-6S LiPo Poles: 4...

Super Capacitor Modul Specification Capacity: 330uF*2. Voltage: 16V. Impedance: 0.002 ohm Ripple Current Endurance: 24 Amp Size: 29mm * 13mm * 13.2mm Weight: 5g Suitable ESC: XERUN and EZRUN series 1/10 scale ESC. Features Super low impedance Low temperature in working state Reduces the RF interference to make the RC model more reliable Improves the burst power when the...

Fits most 540 1/10 brushless motors

Increases the motor shaft diameter from 3.17mm to 5mm for bigger pinions.

Specification: Oil/Porous Bearing No Plug Wire length 40mm 13.000RPM@12V 0.09A

Messurements: Size: 25x25x10mm Distanz Hole-to-Hole: ca. 20mm including 4 screws

Specification: Ball Bearing Wire length ca. 20mm 14.000RPM@12V 0.13A

Messurements: Size: 25x25x10mm Distanz Hole-to-Hole: ca. 20mm including 4 screws

Specification: Ball Bearing Wire length ca. 50mm 10.000RPM@5V

Messurements: Size: 30x30x10mm

Specification: Ball Bearing Wire length ca. 40mm 10.000RPM@5V

Specification: Ball Bearing Wire length ca. 35mm 15.000RPM@5V 0.19A

Specification: Ball Bearing Measurements: 25x25x7mm 5V incl. two plug options

Specification: Ball Bearing Measurements: 25x25x7mm 5V incl. two plug options

Specification: Ball Bearing Wire length ca. 20mm Measurements: 50x50x10mm

XRS legal engine! Used for XRS Touring Stock class! 13.5T 2800kV Sensored Design