Genuine Awesomatix part!

A800FX Stickers Sheet

Genuine Awesomatix spare parts!

Genuine Awesomatix spare parts!

Genuine Awesomatix spare parts!

Genuine Awesomatix spare parts!

Genuine Awesomatix spare parts!

Sway Bar 1.0mm x 2

Sway Bar 1.1mm x 2

Sway Bar 1.2mm x 2

5,5mm/6,5mm/7,0mm wrench which is made from high grade stainless steel with laser engraved logo. Highly recommended for the FBS (Flexible Ball Stud) assembly as well as for AT21/AT21ST-A installation on the chassis.

F3-8M Thrust Bearing

Washer 3.5x9.5x0.2 x 4

Washer 5x15.5x0.3 x 2

With the “zero trail” front hubs the axles are lined up with the center of the steering hub. These hubs provide a smoother steering feel in some conditions due to more Ackermann build into their design yet still provide excellent steering. As such, they are an excellent tuning option for certain conditions. ZT-1 set is the updated version of the ZT set. The difference are...

Suitable for the Awesomatix damper used with RIDE air remover. Delivery content: Alu Case. Air remover, Alu insert and dampers are NOT included.

With the advanced suspension geometry of Awesomatix cars you can set caster, camber and toe by adjusting the turnbuckles. With the help of a 1/10 scale setup system it's possible to visualize these values. To correctly set the caster of your Awesomatix TC you need our MXLR Awesomatix Caster Tools. Just release the outer round head screw on top of the wheel hub (AM06), and...

To unlock the full performance of the Awesomatix TC cars and further simplify the maintenance you should have the MXLR Awesomatix TC Multi Tool in your pit box! These tools are designed by the infinite experience of Awesomatix Team Manager Max Mächler. The tool set combines ALL useful and needed tools in just two lightweight and precious looking wrenches. Our wrenches will...

Our MXLR A800R ShockVac is a specially designed case which holds the new designed Awesomatix dampers in upright position to suck the air out of the case/silicone oil by using one of the known Air Removers. With the all new design of these dampers its very hard to put them into the case of a normal air remover. The solution is our super slim design ShockVac! Reliable and...

Simple but useful and reliable tool for the re-build of Awesomatix D2 Dampers. With this Damper Vac. Insert you are able to put your Dampers in the Vacuum Unit to remove the air which is capsuled in your Damper housing and/or oil. Compatible with all the popular "Damper Vacuum Units" MAX-02-004 contains: 1x MXLR Awesomatix D2 Damper Vac. Insert. Sidenote: Don't forget, this...

Data is important in any Racing class! Our MXLR Awesomatix A12 Damper Check Adapter will help you to check and compare the stiffness of your middle damper. It helps to ensure both sides are same/similar and gives the chance to compare the actual stiffness of dampers build with different oils. The Adapter is 3D printed and fits on "Diff Checkers" with 3mm output shafts like...

We noted there are a few 1/10 TC setup systems out there which have a wrong caster scale engraved. You can see a comparison picture in the gallery below to identify if yours is correct or wrong. If the scale is too narrow, its a one of the not correct versions out there, and your caster setting isn't actually the number it shows! With our MXLR Caster correction stickers you...

We noted there are a few 1/10 TC setup systems out there which have a wrong caster scale engraved. You can see a comparison picture in the gallery below to identify if yours is correct or wrong. If the scale is too narrow, its a one of the not correct versions out there, and your caster setting isn't actually the number it shows! With our MXLR Caster correction stickers you...

We noted there are a few 1/10 TC setup systems out there which have a wrong caster scale engraved. You can see a comparison picture in the gallery below to identify if yours is correct or wrong. If the scale is too narrow, its a one of the not correct versions out there, and your caster setting isn't actually the number it shows! With our MXLR Caster correction stickers you...

The servo arm plays an important role of the overall handling and feeling of your steering inputs. Strength of the material and even more the height from the ball stud to the servo spline are key points for the best performance. We created the MXLR Adjustable Alloy Servo Arm to offer you a strong and reliable height adjustable servo arm which stands the highest competition...

The servo arm plays an important role of the overall handling and feeling of your steering inputs. Strength of the material and even more the height from the ball stud to the servo spline are key points for the best performance. We created the MXLR Adjustable Alloy Servo Arm to offer you a strong and reliable height adjustable servo arm which stands the highest competition...

The MXLR FlexBumper is 3D printed with thermoplastic polyurethane for the optimal strength and flexibility! You may ask what are the advantages over foam bumpers? We can answer that: - absorbs hits better and doesn't transfer them as much into the chassis structure - more robust and sturdy - it always goes back to original shape and don't drag on the floor after a crash -...

The MXLR FlexBumper is 3D printed with thermoplastic polyurethane for the optimal strength and flexibility! You may ask what are the advantages over foam bumpers? We can answer that: - absorbs hits better and doesn't transfer them as much into the chassis structure - more robust and sturdy - it always goes back to original shape and don't drag on the floor after a crash -...

With the trend of feather light bodyshells and even higher top speeds, deflection of bodyshells became an issue for serious racers! The solution is our MXLR Front Body Support for the Awesomatix A800R which: - prevents deflection of the bodyshell under higher speeds - reduces the risk of cracking the front wheel arches of the bodyshell The result is an extended lifetime of...

Special designed and machined Screw for the front KingPin of the Awesomatix A12. Main feature is the extension of the KingPin length by 0,5mm which allows a greater possibility to set front droop with certain tires/rims. The flange on the lower site of the head is the exact same OD as ST1208 (Steel and Alloy versions!) and suitable to fit SH12S0.2 Spring Shim's as well. Our...

Our MXLR Carbon Electronics Plate for the Awesomatix A12 is made from high quality 1,0mm Carbon. It's a rather simple design but offers many advantages: - extends the rather small space to mount your electronics in the A12 - very quick exchange of the whole electronics by just 2 screws - the little notch on the front site helps with centering of the Servo when you use a non...

The WC Edition of our A12 FlexBumper is the final version of the test part that Max Mächler used in his IFMAR World Championship winning A12! With an increased width of 18mm and extended depth of 4mm we achieved a way better support for the bodyshells, which plays a key role when using the popular ultra-light versions. Actually this new style bumper takes over the role for...

Spacers spare part set for the A12 WC Edition FlexBumper. MAX-09-018 contains: 1x 1.0mm Spacer for A12 WC Edition FlexBumper 1x 1.5mm Spacer for A12 WC Edition FlexBumper 1x 2.0mm Spacer for A12 WC Edition FlexBumper Sidenote: Don't forget, this product is made by a 3D printer. It means you are able to see layers and lines from the material! We strive for the best quality...

This is the final version of the prototype Fan Holder which Max Mächler used to win the 2023 1/12 SPEC World Champion Title! The use of a 30mm Fan, powered by 6,0V from the Receiver, was definitely not a disadvantage! It's not easy to fit such a big and strong Fan into the A12 but using smaller than 30mm wasn't an option at all, as we don't like to sacrifice performance! At...

TAKE CARE! We don't have any details about this car. We don't know the price. We don't know the ETA. We don't know anything. The only thing we do know is that Max Mächler posted an announcement on facebook about a "close to final stage prototype" called A12X. It's not possible to pre-order yet. Let us know if you are interested and we will take care. This is still the reguar...

Now available - RCK Sponsor T-Shirts! T-Shirts made from 100% cotton. Available in sizes S-4XL - see measurement details in the product pictures. You are looking for an individual print with your favorite brands? Check www.stickon.shop - it's our supplier for this fantastic shirts and he is able to do whatever you want :-)

Now available - RCK Sponsor T-Shirts! T-Shirts made from 100% cotton. Available in sizes S-4XL - see measurement details in the product pictures. You are looking for an individual print with your favorite brands? Check www.stickon.shop - it's our supplier for this fantastic shirts and he is able to do whatever you want :-)

Now available - RCK Sponsor T-Shirts! T-Shirts made from 100% cotton. Available in sizes S-4XL - see measurement details in the product pictures. You are looking for an individual print with your favorite brands? Check www.stickon.shop - it's our supplier for this fantastic shirts and he is able to do whatever you want :-)

Now available - RCK Sponsor T-Shirts! T-Shirts made from 100% cotton. Available in sizes S-4XL - see measurement details in the product pictures. You are looking for an individual print with your favorite brands? Check www.stickon.shop - it's our supplier for this fantastic shirts and he is able to do whatever you want :-)

You race, we care! RC-KleinKram / RCK stickers combined with your preferred brand! A coloured outline to match your paint job and complete the overall racing look. Features: 210 x 150 mm sheet precut stickers professional stickerfilm, digital printed, easy to place logo colour: black/white seperately available with blue, red or green outline, fitting to your style Content:...

You race, we care! RC-KleinKram / RCK stickers combined with your preferred brand! A coloured outline to match your paint job and complete the overall racing look. Features: 210 x 150 mm sheet precut stickers professional stickerfilm, digital printed, easy to place logo colour: black/white seperately available with blue, red or green outline, fitting to your style Content:...